Modulating Method consequent
on the weight of the monitor
After attaching a drawing
to the spot where the
product is installed, please
mark the four spots of
anchor bolts.
Using the drill bit of 6-mm
diameter at the spot marked
on the wall where anchor
bolts are, drill a hole within
the length of 55 mm.
Please, detach the attached
drawing, and clean the
drilled hole.
After inserting the anchor
bolts for xing into four
spots t in with the hole as
specied in the picuture,
please press the product to
the hole which is inserted
by the anchor bolts for
xing.
Please tighten the xing bolts
to the hole using a philips
screwdriver. The installation
job is nished with the
tightening the xing bolts at
four spots so that the bolts can
be completely pressed to the
wall.
Fixing Bracket on the wall
after complete
At the time of installing the product, rst , conrm
whether the wall materials meet the condition after
denitely
Don't install this product at glass, thin wood or the
wall thinner than 60mm.
Cautions
The xing bolts to the
monitor have two sizes ; one
is 4x12mm, and the other is
4x16mm. Use the size to the
monitor.
Putting the monitor at the bottom with its
back side up and tighten the xing bolts to
the VESA hole like the <Fig. 1>. Completely
tighten the four pieces of xing bolts.
Insert the ARM HINGE into the gap of the
xing bracket on the wall . At the time of
inserting it, be careful about the
direction of ARM HINGE.
With the tightening of the knob bolts
to the hole like the <Fig>, the
installaton job is done.
The span between holes for installing this product is 100x100, or 75x 75mm
based on the size standard. Completely tighten the VESA Assembly of the
monitor using 4 xing bolts to the size 100x100 or 75x75 for the assembly
job.
This product is applicable to the monitor with the weight from
3kg to the maximum 7kg.
4mm
You can use 4-mm-wrench for
modulation as showing in <Fig. 1>
by modulating "+" or "
-
" like
<Fig.2>.
When changing the monitor from
19 inches to 22 inches, you can
modulate it like the drawing beside.
You can use it in accord with the
weight of the monitor.
Method of Installing the product Method of Assembling a Monitor
Guarantee & After-sale Service
