Elastix ELX-3000 User manual

Quick Start Guide V.02.10
ELX3000 APPLIANCE
Unified Communications Server

Quick Start Guide
2
Quick Start Guide
3
Introduction
The Elastix ELX3000 appliance puts at your fingertips all the tools you need to
handle your communications requirements: from telephony, to email, fax, IM,
and more. Information related to the Elastix software and updates can be found
at www.elastix.com
This guide
This guide offers important information about the ELX3000, including technical
specifications and steps to getting started using your new appliance.
Package contents
1Appliance
2Power cords
(1 American and 1 European)
3Quick Start Guide
4Rack-mounting ears
Technical Specifications
*: Represents an estimate in a basic scenario. For more information visit http://elx.ec/benchmark
Default Settings
Table 1 below lists the default configurations each ELX3000 comes pre-installed
with.
PARAMETER
VALUE
Networking
Hostname
elx.localdomain.com
Primary DNS
192.168.1.1
eth0 (static)
IP Address
192.168.1.251
Netmask
255.255.255.0
Gateway
192.168.1.1
Log In credentials
Admin Interface (webUI)
Username
admin
Password
palosanto
Linux console
Username
root
Password
palosanto
MySQL
Username
root
Password
palosanto
Table 1. ELX3000 Appliance Default Settings
Physical
• Height 2.75" (70 mm) –1.5U
• Width 16.73" (425 mm)
• Depth 13.46" (342 mm)
• Weight 5.5 Kg (12.12 lb)
Hardware
• CPU 1.86 GHz Dual Core
• RAM 4 GB
• Hard Drive 500 GB or 250 GB SSD
• Network Interface Gigabit Ethernet
• USB Ports 4 back
• Other ports Serial Console, Parallel,
VGA, Keyboard, Mouse,
Line In, Line Out and Mic
Software
• Operating System Elastix (32 bits)
Telephony
• Analog Ports Customizable: up to 24 *
•Digital Ports Customizable: up to
2 E1/T1/J1 *
• Extensions Up to 250 *
• Concurrent Calls Up to 80 *
Power Supply
• Nominal Power 180 W, fanless
• Operating Voltage 120-240 V Auto switching

Quick Start Guide
4
Quick Start Guide
5
Getting started
1. Unpack the appliance
2. Connect the corresponding power cord to a wall outlet and then the other
end to the appliance
3. Connect an Ethernet cable (not included) to your PC or laptop and the other
end to the Ethernet interface/port on the appliance
4. Connect to your appliance
The ELX3000 appliance is configured by default with the following static IP
address on its Ethernet interface: 192.168.1.251/255.255.255.0
Note: if it is not already configured that way, you may need to set your PC or
laptop’s network interface card (NIC) to have an IP address like
192.168.1.X/255.255.255.0. If this is not possible, contact Technical
Assistance (See page 7)
5. Login into the appliance
Once the appliance is connected to your network, you can access the Elastix
Admin Interface through a web browser. Just direct your browser to
http://192.168.1.251 , we recommend the use of Firefox.
At the login screen use the following information to access the system:
oUsername: admin
oPassword: palosanto
6. Change passwords (recommended)
After logging in, place your mouse cursor over the silhouette icon at the top
right corner of the Elastix’s web UI and click on “Change Elastix Password”
(Figure 1)
Figure 1. Changing Elastix’s Admin Interface password
To change Elastix’s root password (Linux console), connect via ssh to the
appliance: ssh root@192.168.1.251 (default password is: palosanto). Once
inside execute the command: passwd (Figure 2)
Figure 2. Changing Elastix’s Console password

Quick Start Guide
6
Quick Start Guide
7
7. Change the IP address (optional)
If needed, change the IP address of your appliance so that it matches the
address scheme of your local area network (LAN). At the Elastix web user
interface go to: System Network , here you can configure the global
network parameters of your appliance as well as the individual parameters
of the network interface. We recommend the use of an static IP address.
(Figure 3)
Figure 3. Changing the IP Address on the “Ethernet 0” interface
8. Connect your appliance to your LAN’s switch/router. If needed, reconfigure
your PC/laptop’s network interface card IP address settings back to how they
were before step 4
9. Configure telephony dial plan rules, virtual fax devices, email service, and
other options. Enjoy your Unified Communications Appliance!
Note: For more information on configuring your Elastix visit
www.elastix.org or contact Technical Assistance (See page 7)
Thank you for your purchase!
Technical assistance
The Elastix Technical Assistance Center is ready to assist you! For information
on how to get this professional support, please visit: http://elx.ec/elxsupport
Limited warranty
All Elastix Appliances come with a limited warranty. Please contact your local
reseller for more information and instructions on how to claim it.
© 2013 PaloSanto Solutions. All rights reserved. Elastix, the Elastix logo, and ELX3000 are all
trademarks of PaloSanto Solutions.
www.elastix.com
www.palosanto.com
+1-877-ELASTIX