Elec-Tech 780-2402 User manual

Cooks Induction Cooker
Lot# 780-2402
INSTRUCTION MANUAL

IMPORTANT SA EGUARDS
When using Electrical appliance, basic safety precautions should always be followed including
the following.
1. Read all instructions before use.
2. DO NOT touch the hot surfaces. Use handles and knobs.
3. Use unit only on a le el surface.
4. Use only with induction-compatible cookware.
5. Dry outside of the pan before use.
6. Do not heat empty pan.
7. Do not spill any liquids into ent areas.
8. TO protect against electrical shock, do not immerse cord, plugs or housing unit in water or
other liquids.
9. This appliance should not be used by or near children or indi iduals with certain disabilities.
10. Do not lea e appliance unattended when it is on.
11. Unplug from wall outlet when not in use and before cleaning.
12. Do not operate any appliance with a damaged cord or plug, after the appliance
malfunctions or has been damaged in any manner. Call the toll-free NO. to return for
examination, repair or adjustment.
13. The use of accessory attachments not recommended by the appliance manufacturer may
cause injuries.
14. Do not use outdoors or while standing in a damp area,
15. Do not let cord hang o er the edge of the table or counter, or touch hot surface
16. Do not place on or near a hot gas or electric burner, or in a heated o en.
17. Extreme caution must be used when mo ing any pot or pan containing hot oil or other hot
liquids from this appliance.
18. When using this appliance pro ed at least 4-6 inches of air space abo e and on all sides for
air circulation.
19. Do not use this appliance for any other than its intended use. This appliance is for
household use only.
20. To disconnect, turn the unit off, then remo e plug from wall outlet.
21. Do Not Cooks on Broken Cook Top-If cook-top should break, cleaning solutions and
spillo ers may penetrate the broken cook-top and create a risk of electric shock
22. Clean Cook-Top with caution, -If a wet sponge or cloth is used to wipe spills on a hot
cooking area, be careful to a oid steam burn, some cleaners can produce noxious if applied to a
hot surface.
23. Save these instructions.
SAVE THESE INSTRUCTIONS!

WARNING
Short Power Cord Instructions
A short powersupplier cord (or detachable powersupply cord) is to be pro ided to reduce the risk resulting
from becoming entangled in or tripping o er a longer cord. Longer detachable power-supply cords or
extension cords are a ailable and may be used if care is exercised in their use. If a longer detachable
power-supply cord or extension cord is used:
1) The marked electrical rating of the cord set or extension cord should be at least as great as the electrical
rating of the appliance and
2) The cord should be arranged so that it will not drape o er the countertop or tabletop where it can be
pulled on by children or tripped o er unintentionally.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other).To reduce the risk of electric shock,
this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet
re erse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in
any way.
CC requirements
Changes or modifications not expressly appro ed by the party responsible for compliance could
oid the user’s authority to operate the equipment.
NOTE:
● This equipment has been tested and found to comply with the limits for Class B ISM
equipment, pursuant to Part 18 of the FCC Rules.
● These limits are designed to pro ide reasonable protection against harmful interference
in a residential installation.
● This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. Howe er, there is no guarantee that interference will not
occur in a particular installation。
● If this equipment does cause harmful interference to radio or tele ision reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
- Reorient or relocate the recei ing antenna.
- Increase the separation between the equipment and recei er.
- Connect the equipment into an outlet on a circuit different from that to which the
recei er is connected.
- Consult the dealer or an experienced radio TV technician for help.
Read your Use& Care booklet thoroughly before using your Induction Cooker for the first time.
Failure to follow the guidance pro ided by the Use &Care will oid the warranty.

eatures & Specification
eatures
Pollution free: No burning, no smoke or detrimental gases
Safe: no flame, no exhaust
Easy to clean-high rigidity quartz cooking plate
Energy efficient- Use up to 30% less power than conventional cooktop
Power selection from 200W to 1300W
Automatic shutoff- turns off 30 seconds after pan is removed
Overheat protection
Timer function: up to 2 hours 59 minutes timer.
Specification:
Model Rating Voltage Rower rating Power range
780-2402 120V AC/60Hz 1300W 200W-1300W

Using Your Induction Cooker
Before first use
Remo e all packaging materials, labels including the plastic film on the control
Panel-and/or stickers from your induction cooker.
Clean your induction cooker thoroughly before using for the first time ( Cleaning).
Operating instructions
Note:
This appliance applies electromagnetic induction principles to heat. It is different from the
traditional electrical heating method. The cooking utensil itself is used as the original generator
of the cooking heat. A metal pan or pot must be used to generate the magnetic fields needed for
heating up the food/soup in the container. If the metal Pan/pot is remo ed, the appliance will
automatically shut down and stop heating.
1. Place the induction cooker on a flat, e en and heat-resistant countertop surface. Make sure
the air ent without any jam, without any metallic objects all round.
2. Put a suitable pot or pan in the center of the ceramic plate. Do not use pots or pans that are
unstable and easily tipped.
3. Plug in：Insert the plug into 120V wall outlet. The cooker beeps for a second and all LED
flashed one second, “8888” for one seconds. Indicator light aside the button flashes as
standby status.
4. Power on: Press ON/OFF button. The cooker beeps for a second and LED display
“0000”. Power indicator is on. The entilation fan starts work. If no function key pressed,
unit will turn off automatically and turn to standby state after 1 minute.
5. Heating: Press Start button to start to cook. The default cooking time is two hours. The
default power is 1300 W.
6. Shut Down
After using, please press button, the unit will stop heating, then unplug for the wall socket.
NOTE: You can change the cooking time and power during the cooking process at
anytime.
Timer unction
Press the Timer buttons to start the timer setting if you want to change the cooking time.

Default time of 30 min flashes on the display. Press Hour , minute button to set the
timer. Timer is up to 2 hours 59 minutes. The wanted time will flash 5 seconds. If no other
change within 5 seconds, timer will start work.
Power Setting
Always choose an appropriate power according to your recipe. Turn the Knob until get the
required power.
Note: unit will shut off at below status.
Press Power button during cooking.
If timer is not manually set, unit will shut down after default 2 hours.
If timer is manually set, at the end of the timed cycle.
No utensil added 1 minute after pressing Start button
Cookware is not compatible
Heat protection: when cookware exceeds temperature limit. Unit shut off after 3 beeps
and E1 or E2 flashes on display
CAUTION:
The ceramic plate of the induction cooker and pots/pans will get hot.
Do not touch while in use. Allow the appliance to cool for at least 30 minutes
before Handling.
Suitable cookware
1. Bottom of Cookware Material: iron/cast Iron,/stainless steel or enameled iron. The
induction cooker can identify most stainless steel pots.
2. Size requirement: Flat bottom with the diameter within the range of 4.5 inches and 9
inches.
3. After first use, some white spots would appear at the bottom of the pot. This is normal.
Please pour some inegar into the pot and set low heat to heat up for 15-20minutes.Then wipe
the spots away with brush. Please be careful with the remaining heat.
Care and Maintenance

CAUTION:
This appliance contains no user ser iceable Parts and requires little maintenance. Lea e any
ser icing or repairs to qualified personnel.
Before cleaning and storing, press Power button to turn off the Appliance. Unplug the
induction cooker from the wall outlet to prevent electric shock and let the induction cooker
cool down completely.
Use a damp, soapy cloth or sponge to clean the surface of the induction cooker.
To clean stubborn oily stains, please clean with soft moistened cloth dipped in little toothpaste or
neutral liquid cleaner and clean with soft moistened cloth until no residue exits.
During cleaning, ne er clean the cooking surface with rigid brush.
The induction cooker body shall be cleaned lightly with soft dry cloth. The dust around the air entry and
air outlet can be cleaned with a flexible brush or cleaner.
Before storing this appliance, it should be cleaned thoroughly. Store the cooker in a dry place.
WARNING: Never immerse the appliance in water or other liquids.
TROUBLESHOOTING
Problem Cause Solution
Plug in the power cord and
pressing “POWER”
button,no
flashing ”0000”on the
Display.
●The power cord is not
plugged in correctly.
●The POWER button Is
broken.
●plug the power cord into
wall outlet correctly.
●Contact ser ice center.
After pressing START
Button, “1300” is on the
Display, but heating does
not start.
The pot/pan is not suitable
or is too small or without
pot/pan
Use a suitable pot/pan
Pressing START Button
triggers Nothing.
E0,E5 or E6 is displayed on
the display.
An electric part of the
appliance is broken.
Contact the ser ice center.
The cooker suddenly Stops
working.E1 or E2 is
displayed On the display.
●The surrounding
temperature is too high.
●The temperature of the pot
or cooker is too high.
●Mo e the cooker away
from the heat source.
●Remo e the pot/pan and
wait till the cooker has
cooled down.
The cooker suddenly Stops
working.E3 or E4 is
displayed on the display
The current or oltage is
abnormal.
Switch on the appliance
When the current/ oltage
becomes normal.