M Tops HS15-26P User manual
Tel:82-31-866-3808
Fax:82-31-866-3810
Tel : 82-2-2277-3811,3812
Fax : 82-2-2277-3813
General Information
Unpack your item carefully and inspect for damage and report such damage or missing parts to your supplier
right away.
Read your instruction manual carafully. Take time to save time while working with you item.
Make sure that every user has read and understood the instruction manual.
Please store the instruction manual in a place easily accessible to every user.
Safety Information
Please comply with all safety and accident-prevention regulations as in force for laboratory work!
Use extra care when working with flammable substance; refer to safety data sheets.
When connecting your item with your local power supply, please make sure your item is designed for your local supply voltage;
Turn your power switch OFF whenever the item is not used, or before disconnecting the plug.
Use extra care when working in the vicinity of flammable and explosive substances. Motor are non-sparking type, however,
the item itself is not explosion proof.
Please do not connect your instrument without a protective ground outlet.
Your item requires a solid stand.
Warning
To avoid electrical shock, always:
1. Use a properly grounded electrical outlet of correct voltage and current handling capacity.
2. Disconnectfrom power supply before servicing.
To avoid personal injury:
1. Do not use in the presence of flammable or combustible materials; fire or explosion may result.
This item contains components which may ignite such materials.
2. Keep the item clean. Use non-abrasive cleaner. Alkali spills, hydrofluoric acid spills or phophoric acid spills may damage
the item and lead to thermal failure. Unplug unit and remove spills promptly. Do not immerse unit for cleaning.
3. Do not remove or modify grounded power plug. Use only properly grounded outlets to avoid shoch hazard.
Not rated for use in hazardous atmospheres.
4.Use appropriate hand and eye protection when handling hazardous chemicals.
5. Do not use in highly corrosive atmospheres; corrosive fumes and spill may damage your item and internal components,
Caution
Space instrument 12 inches away from combustible materials under any conditions.
Digital
Mantle,Analog
Mantle,Rota Mantle
Hotplate
#691-4,Duckkye-dong,Yangju-
si,Kyounggi-do 482-850
REPUBLIC OF KOREA
go by data plate on the item.
Digital Stirrer
Analog stirrer
HS15-26P
MANUAL
Thank you very much for selecting Mi-sung products.
For your safety,please read the following before using.
Temp controller
Heating Tape
Hot plate
Seoul Office
Head Office
Main products
1. Specifications
2. Functional Description
1. Heater "ON" lamp : It display output of the Heater.
2. Heater control : It is used for the controlling of the temperature.
3. Stirring "ON" lamp : It display output of the Motor.
4. Stirring control : It is used for the controlling of the Motor RPM.
5. Main power S/W : It is for On/Off of the main power.
3. Operation and control
* HEATER Operation * MOTOR Operation
* Connect the supplied power cord into connecting holder on rear side
1.Turn s/w No.2 to the right,then Heating runs 1.Turn s/w No.4 to the right,then stirring runs
with lighting on lamp No.1 with lighting on lamp No.3
2.Adjust the heating volume using s/w No.2 2.Adjust the motor volume using s/w No.4
3.To stop the heating, turn s/w No.2 to the left, 3.To stop the stirring, turn s/w No.4 to the left,
then heating stops with lamp No.1 off then motor stops with lamp No.3 off
※Before using the instrument, read safety precautions carefully, then use this product properly.
※Touching the reactor block surfaces and vials while running, the hot may cause serious burns.
※Do not use the unit on other purpose.
※Avoid contact hot surface. The hot plate will remain hot without any visual indication on power
as well as after power has been removed for sometime .
4. Temperature control
Dimensions
Plate area(mm)
Each 150 x 150
540 x 450 x 125
Electrical supply
AC220-230V 50/60㎐
Heater power
480W x 6
Stirring
Speed
100 ~ 1500rpm
Scale
Up to 1L
Heating & Stirirring Positions
6positions
Temperature
Range
Max. 380℃
Scale
Analog temperature controller
Weight (㎏)
13.5
Heating temperature is controlled by analog temperature controller (Built-in K Type sensor)
Overall(WxDxH)
Top plate
Speed controller
Feedback control
Ceramic coated top plate
Speed display
Capacity(H2O)
Display
Controller
MODEL
Hot plate & Stirrer
HS15-26P
5
1
1
3
2
4
3 Hot plate
5 Hot plate
1 Hot plate
4 Hot plate
6 Hot plate
2 Hot plate
6
1
3
2
4
2
1
3
2
4
Other M Tops Cooktop manuals
