Elecrow Screen Grip-Clip Setup guide

Screen Grip-Clip
Mount Your Smartphone or Tablet to Your Laptop
Quick Start User Guide

1. Open the clip.
2019 ELECROW All Rights Reserved.
C1
H:2mm (2pcs)
H:3mm (2pcs)
H:4mm (2pcs)
H:5mm (2pcs)
H:6mm (2pcs)
H:8mm (2pcs)
Notice: Please use it for the screens which with frame. For protecting your screen, we suggest that
this Laptop clip must be clipped on the frame, not the screen.
2. Choose the suitable size Non-slip mat.(Supply six size of thickness, it can hold
the tablets or smartphones whose thickness between 3mm to 8mm.)

3. Plug in the rubber gasket, make sure that the rubber gasket be fixed into
the two Positioning hole.
4. Also the other side should be fixed.(Choose the suitable rubber gasket, the
thickness of the gasket in one side should be consistent)
2019 ELECROW All Rights Reserved.
C
2

5. Fix the clip on the edge of the laptop screen first, don’t forget to close
the clip so that it will locked on the screen.
2019 ELECROW All Rights Reserved.
C3

6. Lock the second display you want to fix.
2019 ELECROW All Rights Reserved.
C
4

7. Finished! And we retain a hole for you to connector the power cable when
you use the ipad.
2019 ELECROW All Rights Reserved.
C5
hole