Electri-Chef 8800-EC-1056 User manual

Degree of
Doneness
Remove when
Thermometer Reads
Final Cooked
Temperature
BEEF, VEAL OR LAMB
Roast, Steak or Chops
Rare
Medium Rare
Medium
Well Done
130°F - 135°F
135°F - 140°F
150°F - 155°F
160°F - 165°F
140°F
145°F
160°F
170°F
GROUND BEEF, PORK,
LAMB AND VEAL
Patties, Meat Loaf
or Meat Balls
Medium
(Cook until light
gray and no longer
pink in center)
160°F 160°F
PORK Medium 150°F - 155°F 160°F
HAM
Fully Cooked, Whole
Fully Cooked, Sliced
Fres, Raw (Leg)
To Reheat
To Reheat
Medium
140°F
165°F
150°F
145°F
165°F
160°F
POULTRY
Whole Chicken/Turkey*
Parts: Bone-In, Boneless
Well Done
Well Done
165°F - 170°F in thigh/
165°F in breast
165°F
180°F in thigh
170°F in breast
170°
GROUND POULTRY Well Done 165°F 165°F
SEAFOOD/FISH Medium Rare
Medium
135°F - 140°F
145°F
145°F
150°F - 155°F
Cook Like A “Pro”
Use a Meat Thermometer.
• Eliminates Guesswork
•Prevent under or over cooking.
•Insures Food Safety
How to use a meat thermometer:
1. Insert thermometer in center of thickest part of steak or roast.
Make sure thermometer is not touching bone or fat.
2. Wait 10 to 15 seconds before reading.
3. Remove meat from heat when thermometer reads:
* If whole chicken or turkey is stuffed, stuffing must reach 165°F.
Source: U.S. Dept. of Agriculture and Federal Food Code.
OM0610
Owners Manual
Model 8800-EC-1056 Electri-Chef® Grills
OUTDOOR USE ONLY
8800-EC-1056-CB-D-48”
(with optional rotiserrie)
Read this manual in its entirety before operating any controls on the grill. For
safe operation, every person who uses this grill must understand and follow
the correct operational procedures. Do not allow children to operate this grill.
** Save this manual for future reference **

Table of Contents
Table of Contents .................................................. Page 1
Information & Model De�nitions............................. Page 2
Safety Details ........................................................ Page 3
Safeguards ............................................................ page 4 & 5
Unpacking Instructions for CB/PB ......................... Page 6
Assembly Instructions for CB/PB........................... Page 7
Unpacking Instructions for TT................................ Page 8
Unpacking Instructions for I/IM.............................. Page 9
Assembly Instructions for I/IM ............................... Page 10 &11
Operating Instructions ........................................... Page 12
Cleaning & Service................................................ Page 13 & 14
Warranty................................................................ Page 15
Grill Labels............................................................. Page 16
Notes ..................................................................... Page 17
Company Information ............................................ Page 18
LISTED
UL
®
CUS
2YF0
E229895
Outdoor Electric Grill
1 18
If you have any questions about the assembly or
operation of your Electri-Chef®Model 8800-EC-1056
Grill, please contact Electri-Chef®Customer Service at
Electri-Chef® Grills
P.O. Box 1026
Temple, TX 76503

We hope you will take the time to read this manual. By taking the time to
read this manual you will receive the maximum cooking benefits of your Electri-
Chef®grill and also be informed about the safety and operation. To activate the
warranty on your Electri-Chef®grill please take the time to fill out the enclosed
registration card and mail it back to the manufacturer.
We know you will be completely satisfied with the Electri-Chef Model
8800-EC-1056 Grill. If you have any questions regarding the assembly, operation
or safety procedures of your new Electri-Chef®grill please contact us in one of
the following ways.
Email: [email protected]
Fax: [phone]
This manual contains the following information:
- Unpacking Instructions - Maintenance Instructions
- Shipment Inventory - Operating instructions
- Assembly Instructions - Warranty
This manual applies to models:
MODEL DEFINITIONS
ex: 8800 EC 1056 * D
Model Series Electri-Chef Grilling Area (Sq. In.) see below D=Dual Control
I = Island IM = Island Marine
CB = Closed Base TT = Table Top
8800 = Model Series
EC = Electri-Chef®
208-220 Volts - Single Phase - 40 Amp ( )
Amps x Volts = Watts
40 x 220 = 8800
17 2
8800-EC-1056-I-D
8800-EC-1056-IM-D
8800-EC-1056-CB-D
8800-EC-1056-TT-D
NOTES

1.0 Safety Details
• THIS OWNERS MANUAL SHOULD BE READ COMPLETELY BEFORE ATTEMPTING TO USE OR
SERVICE THE ELECTRI-CHEF® MODEL8800-EC-1056 GRILL. FAILURE TO FOLLOW THE INSTRUCTIONS
IN THIS MANUALCOULD RESULTIN PROPERTYDAMAGE, SEVERE PERSONAL INJURY, OR DEATH.
WARNING
It is important to note that some vital statements throughout this manual and on the decals af� xed to
the Electri-Chef® Model 8800-EC-1056 Grill are preceded by bars containing the words DANGER,
WARNING, CAUTION, or NOTE. For your protection we recommend you take special notice of
these safety procedures. Safety procedures are essential and must be followed.
If any of the labels on the grill become damaged, have been removed or cannot be easily read, they
should be replaced immediately to avoid possible property damage, personal injury, or death.
Contact your Electri-Chef® distributor, dealer or Electri-Chef® Service Center.
DANGER
• A DANGER INDICATES AN IMMEDIATE HAZARD WHICH WILL RESULT IN SEVERE PERSONAL
INJURY OR DEATH.
WARNING
• A WARNING INDICATES AN IMMEDIATE HAZARD WHICH COULD RESULT IN SEVERE PERSONAL
INJURY OR DEATH.
CAUTION
• A CAUTION INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN PRODUCT
OR PROPERTY DAMAGE OR MINOR PERSONAL INJURY.
NOTE
• A NOTE PROVIDES KEY INFORMATION TO MAKE PROCEDURES MORE EASILY UNDERSTOOD.
The safety procedures listed must be followed whenever the Electri-Chef® 8800-EC-1056 Grill
is being operated, repaired, or serviced. Speci� c warnings appear throughout this manual
and on the Electri-Chef® 8800-EC-1056 Grill
316
Grill Labels
MODEL
8800 EC
1056
208/220 Volts at 40 AMP/8800 Watts
OutdoorUse OnlyLISTED
UL
®
C
US
2YF0
E229895
Outdoor Electric Grill
D
E
S
I
G
N
T
E
C
H
N
O
L
O
G
Y
G
R
O
U
P
CAUTION -FORYOUR SAFETY
To ensure continued protection against risk
of electric shock, connect to properly grounded
outlets only. Disconnect from electric outlet
before cleaning or any service work is done
on unit
• Clean drip trays before each use
• Read owners manual before
• Turn timer past 10
• Select grilling temperature
• Set timer to desired time
• When grilling is complete turn temperature
control to “0” and allow timer to time out
automatically
OPERATING INSTRUCTIONS
ATTENTION
Débranchez l´appareil de la prise de courant
quand vous ne l´utilisez pas, avant d´enlever
ou d´installer des piéces et avant de le nettoyer.
Les appareils á cordon qui doivent (etre mis á
la terre) par le cordon et la fiche, conformément
á l´article 27.6.1, doivent porter le marguage
suivant, ou l´quivalent, á un endroit bien en vue:
[ATTENTION. Pour ne pas comprometir a
protection contre les rusques de choc électrique,
ne brancher qu´á une prise correctement mise
á la terre.]
P.O. Box 1026
Temple, TX 76503

Do not touch hot surfaces. Use handles or knobs.
To protect against electrical shock do not immerse cord or plugs in water
or other liquids.
This appliance should not be used by children.
Unplug from outlet before cleaning. Allow to cool before servicing.
Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions or has been damaged in any manner. Return
appliance to the nearest authorized service facility for examination,
repair, or adjustment.
The use of accessory attachments not recommended by the appliance
manufacturer may cause injuries.
Extreme caution must be used when moving an appliance containing hot
oil or other hot liquids.
Do not use appliance for other than its intended use.
Fuel, such as charcoal briquettes, is not to be used with appliances.
Use only on properly grounded outlet.
Servicing of this appliance should be performed by an authorized service
representative.
Do Not Use extension cord.
Clean Drip Tray before each use.
1.1 Important
Safeguards
READ and SAVE THESE INSTRUCTIONS
READ and SAVE THESE INSTRUCTIONS
15 4
7.0 Warranty
LIMITED LIFETIME, 5, 3 AND 1 YEAR WARRANTY
THE STAINLESS STEEL GRILL ASSEMBLIES OF THIS PRODUCT ARE
WARRANTED FOR THE LIFETIME OF THE ORIGINAL CONSUMER
PURCHASER FROM THE DATE OF PURCHASE, AGAINST DEFECTS
IN MATERIALS AND WORKMANSHIP.
THE COOKING GRID IS WARRANTED TO THE
ORIGINAL CONSUMER PURCHASER FOR FIVE ( 5 ) YEARS FROM DATE
OF PURCHASE AGAINST BURN-OUT OR DEFECTS IN MATERIALS
AND WORKMANSHIP.
THE STAINLESS STEEL HEAT - FLAVOR PLATE IS WARRANTED TO
THE ORIGINAL CONSUMER PURCHASER FOR THREE ( 3 ) YEARS
FROM DATE OF PURCHASE, AGAINST DEFECTS IN MATERIALS
AND WORKMANSHIP.
ALL OTHER COMPONENTS, ELECTRICAL OR MECHANICAL ARE
WARRANTED TO THE ORIGINAL CONSUMER PURCHASER FOR
A MINIMUM OF ONE ( 1 ) YEAR FROM THE DATE OF PURCHASE
OR THE WARRANTY TIME OF THE MANUFACTURE OF THE COMPONENT,
ELECTRICAL OR MECHANICAL, WHICH EVER WARRANTY TIME PERIOD
IS LONGER, AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP.
THIS WARRANTY DOES NOT COVER DAMAGE OR FAILURES CAUSED
BY MISUSE, UNCONTROLLED FLARE-UPS, NEGLIGENT OR COMMERCIAL
USE. IF ANY WARRANTED PART FAILS DURING ITS WARRANTY
PERIOD, SEND THE FAILED OR DEFECTIVE PART(s) TO ELECTRI-CHEF
GRILLS FOR REPAIR OR REPLACEMENT AT THE MANUFACTURER’S
OPTION WITHOUT CHARGE. THE TRANSPORTATION COST FOR RETURNING
FAILED OR DEFECTIVE COMPONENTS ARE THE RESPONSIBILITY OF
THE CONSUMER.
REPAIR OR REPLACEMENT OF A DEFECTIVE COMPONENT(s) IS THE SOLE
REMEDY UNDER THIS LIMITED WARRANTY. IN NO EVENT WILL ELECTRI-CHEF
BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO
NOT ALLOW THE LIMITATION OR EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THIS LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
ANY IMPLIED WARRANTY OF THIS PRODUCT SHALL BE LIMITED IN DURATION TO
ONE ( 1 ) YEAR DATE OF PURCHASE. SOME STATES DO NOT ALLOW LIMITATIONS
ON THE DURATION OF IMPLIED WARRANTY, SO THIS LIMITATION MAY NOT APPLY
TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Electri-Chef® Grills
P.O. Box 1026
Temple, TX 76503

1.1 Importantes
Mesures de Securite
Appliquez les mesures de securite elementaires suivantes lor vous utilisez un
appareil electrique:
a) Lisez toutes les instructions.
b) Ne touchez pas les surfaces qui peuvent etre chaudes. Utilisez les poignees
ou les boutons.
c) Pour eviter les chocs electriques, ne plongez pas le cordon, la fiche ou liap
pareil portatif (indiuer au besoin diautres pieces similaires) dans lieau ou
autre liquide.
d) Surveillez bien les enfants siils utilisent un appareil ou siils se trouvent a
proximite d’un appareil en marche.
e) (i) Appareils portatifs. Debranchez l’appareil de la prise de courant quand
vous ne l’utilisez pas, avant d’enlever ou d’installer des pieces et avant
de le nettoyer. Laissez l’appareil refroidir avant de le manipuler.
(ii) Appareils branches a demeuer. Assurez-vous que l’appareil est ARRETE
quand vous ne l’utilisez pas, avant d’eniever ou d’installer des pieces et
avant de le nettoyer.
f) Appareils portatifs. Ne faites pas fonctionner l’appareil si le cordon ou la fiche
sont endommanges, si l’appareil ne fonctionne pas correctement, s’il est
tombe ou s’il a ete tombe ou s’il a ete endommage. confiez au service de
reparation recommande le plus proche tout examen, reparation ou reglage
electrique ou mecanique de l’appareil.
g) L’utilisation d’accessories non recommandes par le fabricant de l’appareil
peut causer des blessures.
h) N’utilisez pas l’appareil a exterieur (cette consigne peut etre omise si le pro
duit est destine a etre utilise a l’exterieur.
i) Ne laissez pas le cordon pendre par-dessus le bord d’une table ou d’un
comptoir et assurez-vous que le cordon n’est pas en contact avec des sur
faces chaudes.
j) Ne placez pas l’appareil pres d’un bruleur a gaz allume ou d’un element
electrique ou tension ou dans un four allume.
k) Sovez tes prudent en deplacant un appareil qui contient de l’huile ou un autre
liquide chaud.
l) Le cas echeant branchez toujours la fiche a l’appareil et assurez-vous que
l’interruptuer de celui-ci est a la position ARRET (OFF) avant de brancher
lafiche dans la prise. Pour de brancher l’appareil, placez l’interrupteur a
ARRET (OFF) puis retirez la fiche de la prise de courant.
m) N’utilisez l’appareil que pour la fonction a laquelle il est destine.
n) Evitez de troucher les pieces mobiles.
o) Conservez ces instructions.
5 14
6.0 Caring for the Exterior of Your
Stainless Electri-Chef®Grill
Continued
DANGER
NEVER ATTEMPT TO SERVICE OR REPAIR YOUR GRILL WHILE PLUGGED INTO THE ELECTRIC OUTLET.
WARNING
Disconnect from electric outlet before cleaning or any service work is performed on this gril unit.
Cleaning Exterior
Regular Cleaning...
•Wash down the surface regularly using water containing soap or mild
detergents.
•Always rinse the surface with fresh water after cleaning.
•Polishing the surface with a soft dry cloth can complete a thorough
cleaning operation.
•When wiping or polishing stainless steel, always follow the direction
of the original grain or “brush” finish.
Cleaning Aids...
•Never use abrasive materials such as scouring pads or wire wool.
•Use a brush or soft damp cloth to remove loose deposits.
•Use a cream cleanser and soft cloth for stubborn deposits.
All grades of stainless steel can stain and discolor as a result of long term surface deposits and
can never be accepted as completely maintenance free. In order to achieve maximum corrosion
resistance, the surface of the stainless steel must be kept clean. Surface contamination and
the formation of deposits must be prevented. These deposits may be minute particles of iron
or rust from other sources used on the building or new premises and not removed until after
the stainless steel items have been fixed. Industrial and even naturally occuring atmospheric
conditions can produce deposits which can be equally corrosive, e.g. salt deposits from marine
conditions. Strong acid solutions are sometimes used to clean masonry and tiling of buildings but
these should NEVER be permitted to come into contact with metals, including stainless steel.

13 6
2.0 Unpacking Instructions
for CB
This section describes how to unpack your Electri-Chef®
Model 8800-EC-1056-CB Grill
Step 1
A. Cut nylon straps holding carton.
B. Lift carton off grill.
C. Remove all foam packing.
D. Before continuing read Owner’s Manual.
Step 2
F. Remove grill from carton bottom.
G. Remove all items from boxes or shipping enclosures.
H. Remove tape from grease tray.
I. Open grill hood and remove warming rack from corrugated sheet and remove
all other packing material from under cooking grids and stainless steel
heat plate.
Shipment Inventory
Below is a complete list of grill components and hardware that you should
have received with your shipment. If you are missing any of the items listed
below, immediately contact the dealer from whom you purchased your grill
A. Items in carton
1. Grill body, base with shelves
2. One (1) Owner’s Manual.
3. Two (2) warming rack.
4. Four (4) swivel casters (or 4 adjustable legs if leg option ordered).
5. Four (4) cooking grids.
6.0 Cleaning, Service &
Maintenance of Your Electri-Chef®
Model 8800-EC-1056 Grill
NOTE
Do not use high intense heat to clean grid. Using high intense heat for cleaning only bakes grease
and food to grid and wastes electricity. This practice may result in a grease fire which may cause
damage to the grill and its electronic components.
WARNING
Disconnect from electric outlet before cleaning or any service work is performed on this grill unit.
NOTE
It is recommended to use rubber or plastic gloves during cleaning of grill.
CAUTION
CAUTION
NEVER USE any abrasive cleanser, wire brush, metal scouring pads or any other abrasives on
the stainless steel surfaces of the grill.
Cleaning Interior
A. Disconnect grill from electric outlet.
B. Remove Grease Drip Tray and dispose of drip tray liner if required.
Replace with heavy duty aluminum foil if a disposable liner is not available.
C. Use a spray oven-cleaner (“Easy-Off Fume Free Max” is recommended) and
FOLLOW THE DIRECTIONS ON THE CAN for two hour cleaning. Disregard
the “BBQ Grill Cleaning” warning statement about grill surfaces located on the
can. Your all stainless steel interior and exterior surfaces of your grill WILL
NOT be damaged from the use of the Easy-Off oven cleaner.
D. After cleaning, wipe grill dry and reconnect to the electric outlet.
F. Cleaning of Cooking Grid.
1. Follow “BBQ Grill Cleaning” on back of Easy-Off can. After completion
replace cooking grid.
G. Cleaning of Stainless Steel Heat Plate.
1. Remove cooking grid from grill. Remove stainless steel Heat Plate
from grill and scrape excess burnt food and grease onto paper or
into plastic bag for disposal. Replace Heat Plate and Cooking Grids.
Service & Maintenance
There is very little service or maintenance required except for cleaning.
If you encounter any operational problems with your Electri-Chef®Grill, unplug the
grill from the electic outlet and call your dealer where you purchased the grill

2.1 Assembly Instructions
for CB Continued
NOTE
No grill assembly is required for the
Model 8800-EC-1056-CB.
The grill comes fully assembled
and ready to use.
This section describes how to assemble your Electri-Chef® Model 8800-EC-1056 Grill
7 12
5.0 Operating Instructions
Your grill has now been unpacked and assembled. It is now time to plug your grill into a
220 Volts Single Phase 40 AMP outlet.
WARNING
Plug this unit into a properly grounded 220 Volt - Single Phase - 40 AMPS outlet.
Round
Center
Control
Knob
Heat
Indicator
Off/10-60
Minute
Timer
Follow the instructions on the control panel of your grill and other suggestions in this
section to operate your Electri-Chef® Model 8800-EC-1056 Grill.
The Dual control grill in Figure 4b, consist of two (2) Round Temperature Control Knobs
and two (2) OFF/10-60 Minute Timers and two (2) Heat Indicator.
- The Round Temperature Control Knob controls the grill temperature
through a range of 0 (OFF) 120° - 570°
Preheat grill 10 - 12 minutes at desired temperature control setting before grilling.
NOTE
Allow the timer to time out on its own. Components may be damaged by forcing timer to “0”. (OFF)
General notes for above
1. Always check grease trays for excess grease or food particles before each
use. If required, remove excess grease or food.
2. It is recommended that all grilling, cooking or baking be accomplished with
the grill hood in the closed position.
3. At the completion of any grilling, cooking or baking, do the following:
A. Turn round temperature control knob to zero (0). (OFF)
B. Allow timer to time out. Do not force to zero (0). (OFF)
C. Clean cooking grid with soft wire brush of any excess greas and
food particles.
1. Read owners manual
before operating this grill
2. Plug into 220 Volts
@ 40 AMP outlet
3. Set timer to desired time
4. Select grilling temperature
5. When grilling is complete
turn temperature control to
“0” and allow timer to time
off automatically
1822Industrial Blvd.
Temple,TX 76504
MODEL
8800EC
1056
208/220Volts at 40 AMP/8800 Watts
OutdoorUse Only LISTED
LISTED
UL
®
C
US
US
2YF0
E229895
OutdoorElectricGrill
D
E
S
I
G
N
T
E
C
H
N
O
L
O
G
Y
G
R
O
U
P
CAUTION - FOR YOUR SAFETY
To ensure continued protection against risk
of electric shock, connect to properly grounded
outlets only. Disconnect from electric outlet
before cleaning or any service work is done
on unit
• Cleandrip trays before each use
• Readowners manual before
• Turntimer past 10
• Selectgrilling temperature
• Settimer to desired time
• Whengrilling is complete turn temperature
control to “0” and allow timer to time out
automatically
OPERATING INSTRUCTIONS
60
OFF
Tur n
Past
10
MINUTES
40
30
TEMPERATURE CONTROL
HEAT
ON
Figure 4a Grill Dual Control
60
OFF
Tur n
Past
10
MINUTES
40
30
TEMPERATURE CONTROL
HEAT
ON
OPERATING INSTRUCTIONS

3.0 Unpacking & Assembly
for TT Models
This section describes how to unpack your Electri-Chef®Model 4400-EC-1056-TT Grill
Step 1
A. Cut nylon straps holding carton.
B. Lift carton off grill.
C. Remove all foam packing.
D. Before continuing read Owner’s Manual.
Step 2 - Assembly
E. Remove grill from carton bottom.
F. Attach legs (4) on each corner of the grill body.
Step 3
G. Remove all items from boxes or shipping enclosures.
H. Remove tape from grease tray.
I. Open grill hood and remove warming rack from corrugated sheet and remove
all other packing material from under cooking grids and stainless steel
heat plate.
Shipment Inventory
Below is a complete list of grill components and hardware that you should
have received with your shipment. If you are missing any of the items listed
below, immediately contact the dealer from whom you purchased your grill
A. Items in carton
1. Grill body
2. One (1) Owner’s Manual.
3. One (1) warming rack.
4. Four (4) legs.
5. Four (4) cooking grids.
11 8
4.2 Assembly Instructions
for Island Model (continued)
Step 3.2
Attaching the Lower Grill Flange to Island Grill
Island Lower Grill Flange
Notes
1. The Lower Grill Flange is attached to the power cord. There is no way of
removing the Lower Grill Flange without damaging it or the power cord.
2. Attach the Lower Grill Flange to the Island Grill as shown in diagram 1.a
with a phillips screwdriver, using the screws in the enclosed bag labeled
Lower Grill Flange Mounting Screws.
Diagram 1.a
1822 Industrial Blvd.
Temple, TX 76504
MODEL
8800 EC
1056
208/220 Volts at 40 AMP/8800 Watts
Outdoor Use Only LISTED
LISTED
UL
®
C
US
US
2YF0
E229895
OutdoorElectric Grill
D
E
S
I
G
N
T
E
C
H
N
O
L
O
G
Y
G
R
O
U
P
CAUTION - FOR YOUR SAFETY
To ensure continued protection against risk
of electric shock, connect to properly grounded
outlets only. Disconnect from electric outlet
before cleaning or any service work is done
on unit
Front View
Grill & Lower Grill Flange
Assembly
1822 Industrial Blvd.
Temple, TX 76504
MODEL
8800 EC
1056
208/220 Volts at 40 AMP/8800 Watts
Outdoor Use Only LISTED
LISTED
UL
®
C
US
US
2YF0
E229895
OutdoorElectric Grill
D
E
S
I
G
N
T
E
C
H
N
O
L
O
G
Y
G
R
O
U
P
CAUTION - FOR YOUR SAFETY
To ensure continued protection against risk
of electric shock, connect to properly grounded
outlets only. Disconnect from electric outlet
before cleaning or any service work is done
on unit
Front View
Grill & Lower Grill Flange
Attached
power cord
power cord
screws (5)

4.0 Unpacking Instructions
for 1056-I & 1056-IM
This section describes how to unpack your Electri-Chef®Model 8800-EC-1056-I/IM Grill
Step 1
A. Cut nylon straps holding carton.
B. Lift carton off grill.
C. Remove all foam packing.
D. Before continuing read Owner’s Manual.
Step 2
F. Remove grill from carton bottom.
G. Remove all items from boxes or shipping enclosures.
H. Remove tape from grease tray.
I. Open grill hood and remove warming rack from corrugated sheet and remove
all other packing material from under cooking grids and stainless steel
heat plate.
Step 3.1 Assembly
J. See Island Cut-Out Information Page (see page 10)
Shipment Inventory
Below is a complete list of grill components and hardware that you should
have received with your shipment. If you are missing any of the items listed
below, immediately contact the dealer from whom you purchased your grill
A. Items in carton
1. Grill body
2. One (1) Owner’s Manual.
3. One (1) warming rack.
4. Four (4) cooking grids.
5. Five (5) Lower Grill Flange Mounting Screws
4.1 Assembly Instructions
for 1056-I & 1056-IM (continued)
Top View Front View Side View
Notes
1. No under grill support required on the island.
2. Grill has mounting flanges on sides & back which sit on top
of island surface, tile, etc.
3. Grill cut-out should be (single & dual control use same cut-out dimensions):
Island Model 1056-I Island Model 1056-IM
A. 48 ⅜” left to right A. 49 5/8” left to right
B. 24 ¼” front to back B. 24 ¾” front to back
C.10 ½” from top of island surface C. 10 ½” from top of island surface
4. Be sure 220 Volt @40 amp outlet is located behind island.
5. Island should be constructed of fire resistant materials or grill cut-out
should be lined with ½” thick fire resistant materials.
9 10
Step 3.1
Place grill in island cut-out
Island Cut-Out
CAUTION
CAUTION Island enclosures must be built of
fire resistant materails.
A18 ¼”
35”
top of
tile
B
C
4”
7”
18” x 18”
door opening
18 ¼”
Door
Opening