fans and keeps a balanced temperature among each compartment with quick temperature
decrease.
VI. Malfunction and remedy
1)、“--” displayed for the Wine Compartment
Note:
When the ambient temperature is close to or below 0°C, there is no problem with the
appliance. Repair according to item 14 is required only when the food is frozen and
“—”
is displayed. Temperature of the wine compartment should only be displayed as above
0°C.
2) “C1 ”displayed as the wine compartment temperature
Note:
Temperature sensed by the wine compartment sensor is beyond controllable range
Attention:
If such malfunction occurs, the appliance will be running in a special safe mode. The
refrigeration function of the appliance is protected but temperature will not be displayed.
Check if the ambient temperature is above 45°C or not and if the appliance is just
switched on or not. If it is just switched on, check the temperature display after the
appliance has run for 1 hour.
Cause A(most likely): sensor plug does not contact well with the power board
Remedy: check, clean or repair the plug and/or socket
Cause B: the wine compartment sensor is broken
Remedy: check the resistance value of the sensor and compare it to the value in the
diagram. If the actual resistance value is not in the prescribed range, repair the sensor.
3) “C2 ”displayed as the wine compartment temperature
Note:
Temperature sensed by the wine compartment and its evaporator sensors is beyond
controllable range
注:Attention:
If such malfunction occurs, the appliance will be running in a special safe mode. The
refrigeration function of the appliance is protected but temperature will not be displayed.
Check if the ambient temperature is above 45°C or not and if the appliance is just
switched on or not. If it is just switched on, check the temperature display after the
appliance has run for 1 hour.