Electrolux U20412 User manual

EPGH
GB
Gas hobs
INSTRUCTION BOOKLET
Please read this instruction booklet before using the appliance
35674-8901

2
This appliance complies with the following
E.E.C. Directives:
* 73/23 - 90/683 (Low VoltageDi ective);
* 93/68 (Gene al Di ectives);
* 89/336 (Elect omagnetical Compatibility
Di ective);
* 90/396 (Gas Appliances),
and subsequent modifications
Guide to Use the instructions
The following symbols will be found in the text to guide
you th oughout the Inst uctions:
Safety Inst uctions
Step by step inst uctions fo an ope ation
Hints and Tips
Envi omental info mation
F
Important Safety Information
You MUS read these warnings carefully before installing or using the hob. If you need
assistance, contact our Customer Care Department on 08705 950950
Installation
lThis hob must be installed by qualified pe sonnel,
acco ding to the manufactu e s inst uctions and to
the elevant B itish Standa ds.
lAny gas installation must be ca ied out by a
egiste ed CORGI installe .
lRemove all packaging befo e using the hob.
lEnsu e that the gas and elect ical supply complies
with the type stated on the ating plate, located nea
the gas supply pipe.
lDo not attempt to modify the hob in any way.
Child Safety
lThis hob is designed to be ope ated by adults. Do
not allow child en to play nea o with the hob.
lThe hob gets hot when it is in use.
lChild en should be kept away until it has cooled.
lChild en can also inju e themselves by pulling pans
o pots off the hob.
During Use
lThis hob is intended fo domestic cooking only. It is
not designed fo comme cial o indust ial pu poses.
lWhen in use a gas cooking appliance will p oduce
heat and moistu e in the oom in which it has been
installed. Ensu e the e is a continuous ai supply,
keeping ai vents in good condition o installing a
cooke hood with a venting hose.
lWhen using the hob fo a long pe iod of time, the
ventilation should be imp oved, by opening a window
o inc easing the ext acto speed.
lDo not use this hob if it is in contact with wate .
Do not ope ate the hob with wet hands.
lEnsu e the cont ol knobs a e in the OFF position
when not in use.
lWhen using othe elect ical appliances, ensu e the
cable does not come into contact with the hot su faces
of the cooking appliance.
lUnstable o misshapen pans should not be used on
the hob as unstable pans can cause an accident by
tipping o spillage.
lNeve leave the hob unattended when cooking with
oil and fats.
lNeve use plastic o aluminium foil dishes on the hob.
lPe ishable food, plastic items and a eosols may be
affected by heat and should not be sto ed above o
below the hob unit.
Service
lThis hob should only be epai ed o se viced by an
autho ised Se vice Enginee and only genuine
app oved spa e pa ts should be used.
Environmental Information
lAfte installation, please dispose of the packaging with
due ega d to safety and the envi onment.
lWhen disposing of an old appliance, make it unusable,
by cutting off the cable.
Keep this instruction book for future reference
and ensure it is passed on to any new owner.

3
Contents
For the User For the Installer
Important Safety Information 2
Description of the Hob 3
Operation 4
Maintenance and Cleaning 4
Something Not Wor ing? 5
Service and Spare Parts 6
Guarantee Conditions 6
Engineers technical data 9
Installation 10
Building In 11
Electrical connections 12
Wiring Diagram 13
Fault Finding 13
Commissioning 15
Conversion from Natural Gas to LPG 15
1. Hob Top
2. Rapid Burner
3. Semi-rapid Burners
4. Auxiliary Burner
5. Control nobs
6. Ignition pushbutton
3
2
4
5
6
3
Description of the Hob
1

4
Operation
HOB BURNERS
To light a bu ne , tu n the elevant cont ol knob
anticlockwise to maximum position. At the same time
push the elect ic ignition pushbutton which is ma ked by
a little spa k. Then adjust the flame as equi ed.
If the bu ne does not ignite, tu n the cont ol knob to
ze o, and t y again.
To ensu e maximum bu ne efficiency, you should only
use pots and pans with a flat bottom fitting the size of
the bu ne used (see table).
Burner minimum maximum
diameter diameter
La ge ( apid) 180 mm. 260 mm.
Medium (semi- apid) 120 mm. 220 mm.
Small (Auxilia y) 80 mm. 160 mm.
Maintenance and Cleaning
If you use a saucepan which is smalle than the
ecommended size, the flame will sp ead beyond
the bottom of the vessel, causing the handle to
ove heat.
As soon as a liquid sta ts boiling, tu n down the
flame so that it will ba ely keep the liquid
simme ing.
Befo e any maintenance o cleaning can be ca ied
out, you must DISCONNEC the hob f om the
elect icity supply.
The hob is best cleaned whilst it is still wa m, as
spillage can be emoved mo e easily than if it is
left to cool.
The Hob Top
Regula ly wipe ove the hob top using a soft cloth well
w ung out in wa m wate to which a little washing up liquid
has been added. Avoid the use of the following:
- household dete gent and bleaches;
- imp egnated pads unsuitable fo non-stick saucepans;
- steel wool pads;
- bath/sink stain emove s.
Should the hob top become heavily soiled, it is
ecommended that a cleaning p oduct such as Hob B ite
o Ba Keepe s F iend is used.
an Supports
The pan suppo ts a e dishwashe p oof. If washing them
by hand, take ca e when d ying them as the enamelling
p ocess occasionally leaves ough edges. If necessay,
emove stubbo n stains using a paste cleane .
The Burners
The bu ne caps and c owns can be emoved fo cleaning.
Wash the bu ne caps and c owns using hot soapy wate ,
and emove ma ks with a mild paste cleane . A well
moistened soap imp egnated steel wool pad can be used
with caution, if the ma ks a e pa ticula ly difficult to
emove.
Afte cleaning, be su e to wipe d y with a soft cloth.

5
Something Not Working?
If the hob is not wo king co ectly, please ca y out the following checks befo e contacting you local Se vice Fo ce
Cent e.
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made e en if the appliance is under guarantee.
SYMP OM
nThe e is no spa k when lighting the gas
nThe gas ing bu ns unevenly
SOLU ION
uCheck that the unit is plugged in and the elect ical
supply is switched on
uCheck that the RCCB has not t ipped (if fitted)
uCheck the mains fuse has not blown
uCheck the bu ne cap and c own have been
eplaced co ectly, e.g. afte cleaning.
uCheck the main jet is not blocked and the bu ne
c own is clea of food pa ticles.
uCheck the bu ne cap and c own have been
eplaced co ectly, e.g. afte cleaning.
If afte all these checks, you hob still does not ope ate
co ectly, contact you local Se vice Fo ce Cent e.
Please note that it will be necessa y to p ovide p oof of
pu chase fo any in-gua antee se vice calls.
In-guarantee customers should ensure that the
above checks have been made as the engineer will
make a charge if the fault is not a mechanical or
electrical breakdown.
Service and Spare arts
When you contact the Se vice Cent e, they will need the
following info mation:
1. You name, add ess and post code.
2. You telephone numbe
3. Clea and concise details of the fault
4. The model and the se ial numbe (see ating label on
the back of this inst uction booklet)
5. Date of pu chase
If you equi e spa e pa ts o an enginee contact you
local Se vice Fo ce Cent e by telephoning:
0870 5 929929
You call will be outed to the Se vice Cent e cove ing
you post code a ea. The add esses of Elect olux Se vice
Fo ces Cent es a e detailed on the following pages.
CUSTOMER CARE
Fo gene al enqui ies conce ning you appliance, contact
ou Custome Ca e Depa tment by lette o telephone as
follows:
Customer Care Department
ELEC ROLUX
55-77 High St eet
Slough
Be kshi e, SL1 1DZ
Tel: [phone]*
* calls to this number may be recorded for training
purposes.

6
Electrolux Standard Guarantee
Conditions
We, Elect olux, unde take that if, within 12 months of
the date of the pu chase, this Elect olux appliance o
any pa t the eof is p oved to be defective by any eason
only of faulty wo kmanship o mate ials, we will, at ou
option, epai o eplace the same FREE OF ANY
CHARGE fo labou , mate ials o ca iage on condition
that:
* The appliance has been co ectly installed and used
only on the gas and elect icity supply stated on the
ating plate.
* The appliance has been used fo no mal domestic
pu poses only, and in acco dance with the
manufactu e 's inst uctions.
* The appliance has not been se viced, maintained,
epai ed, taken apa t o tampe ed with by any pe son
not autho ised by us.
* All se vice wo k unde this gua antee must be
unde taken by a Elect olux Se vice Fo ce Cent e.
* Any appliance o defective pa t eplaced shall
become the Company's p ope ty.
* This gua antee is in addition to you statuto y and
othe legal ights.
Home visits a e made between 8.30am and 5.30pm
Monday to F iday. Visit may be available outside these
hou s, in which case a premium will be cha ged.
Exclusions
his guarantee does not cover:
* Damage o calls esulting f om t anspo tation,
imp ope use o neglect, the eplacement of any light
bulbs o emovable pa ts of glass o plastic.
* Costs incu ed fo calls to put ight an appliance
which is imp ope ly installed o calls to appliance
outside the United Kingdom.
* Appliances found to be in use within a comme cial
o simila envi onment, plus those which a e the
subject of ental ag eements.
* P oducts of Elect olux manufactu e which a e not
ma keted by Elect olux.
European Guarantee
If you should move to anothe count y within Eu ope then
you gua antee moves with you to you new home
subject to the following qualifications:
* The gua antee sta ts f om the date you fi st
pu chased you p oduct.
* The gua antee is fo the same pe iod and to the same
extent fo labou and pa ts as exist in the new count y
of use fo this b and o ange of p oducts.
* This gua antee elates to you and cannot be
t ansfe ed to anothe use .
* You new home is within the Eu opean Community
(EC) o Eu opean F ee T ade A ea.
* The p oduct is installed and used in acco dance with
ou inst uctions and is only used domestically, i.e. a
no mal household
* The gas type and the gas supply p essu e comply
with the specification given in the ating label
* The p oduct is installed taking into account
egulations in you new count y.
Befo e you move, please contact you nea est Custome
Ca e cent e, listed below, to give them details of you
new home. They will then ensu e that the local Se vice
O ganisation is awa e of you move and able to look afte
you and you appliances.
F ance Senlis [phone]
Ge many Nü nbe g [phone]
Italy Po denone [phone]
Sweden Stockholm [phone]
UK Slough [phone]
Guarantee Conditions

7
ELECTROLUX SERVICE FORCE
o contact your local Electrolux Service Force Centre telephone [phone]
CHANNEL ISLANDS
GUERNSEY Guernsey Electricity
PO Box 4
Vale, Guernsey
Channel Islands
ERSEY ersey Electricity
Company
PO Box 45
Queens Road
St Helier
ersey
Channel Islands
E4 8NY
SCO LAND
ABERDEEN 54 Claremont Street
(M05) Aberdeen
AB10 6RA
AUCHTERMUCHY 33A Burnside
(M03) Auchtermuchy
Fife
KY14 7A
BLANTYRE Unit 5
(M07) Block 2
Auchenraith Industrial
Estate
Rosendale Way
Blantyre
G72 0N
DUMFRIES 93 Irish Street
(M01) Dumfries
Scotland
DG1 2PQ
DUNOON Briar Hill
7 Hill Street
(M 67) Dunoon
Argyll
PA23 7AL
GLASGOW 20 Cunningham Road
(M04) Clyde Estate
Rutherglen,
Glasgow,
G73 1PP
INVERNESS Unit 3B
(M06) Smithton Indust. Est.
Smithton
Inverness
IV1 2PD
ISLE OF ARRAN Arran Domestics
(OWN SALES) Unit 4 The Douglas
Centre
Brodick
Isle of Arran
KA27 8A
ISLE OF BARRA Zerfah
(OWN SALES) 244 Bruernish
Isle of Barra
Western Islands
HS9 5QY
ISLE OF BUTE Walker Engineering
(M66) Glenmhor
Upper Serpentine
Road
Rothesay
Isle of Bute
PA20 9EH
NOR H EAS
GATESHEAD Unit 356a
(M39) Dukesway Court
Dukesway
Team Valley
Gateshead
NE11 0BH
GRIMSBY 15 Hainton Avenue
(M42) Grimsby
South Humberside
DN32 9AS
HULL Unit 1
(M41) Boulevard Industrial
Estate
Hull
HU3 4AY
LEEDS 64-66 Cross Gates
(M37) Road
Leeds
LS15 7NN
NEWTON AYCLIFFE Unit 16
(M45) Gurney Way
Aycliffe Ind Estate
Newton Aycliffe
DL5 6U
SHEFFIELD Pennine House
(M38) Roman Ridge Ind.
Roman Ridge Road
Sheffield
S9 1GB
NOR H WES
BIRKENHEAD 1 Kelvin Park
(M11) Dock Road
Birkenhead
L41 1LT
CARLISLE Unit 7
(M10) ames Street
Workshops
ames Street
Carlisle
Cumbria CA2 5AH
ISLE OF MAN South Quay Ind.
(M64) Estate
Douglas
Isle of Man IM1 5AT
LIVERPOOL Unit 1
(M15) Honeys Green
Precinct
Honeys Green Lane
Liverpool
L12 9 H
MANCHESTER Unit B
(M09) Central Industrial
Estate
St Marks Street
Bolton
BL3 6NR
PRESTON Unit 250
(M13) Dawson Place
Walton Summit
Bamber Bridge
Preston
Lancashire
PR5 8AL
STOCKPORT Unit 20 Haigh Park
(M16) Haigh Avenue
Stockport
SK4 1QR
ISLE OF LEWIS ND Macleod
(M69) 16 ames Street
Stornoway
Isle of Lewis
PA872QW
KELSO 2-8 Wood Market
(M08) Kelso
Borders TD5 7AX
ORKNEY Corsie Domestics
(M65) 7 King Street
Kirkwall
Orkney KW15 1RE
PERTH Hydro Electrical
Inveralmond House
Ruthervenfield Road
Perth PH1 3AQ
PERTH Graham Begg Unit 4
(OWN SALES) Airport Ind Estate
Wick KW1 4QS
SHETLAND Tait Electronic
(OWN SALES) Systems Ltd.
Holmsgarth Road
Lerwick
Shetland ZE1 0PW
SHETLAND Bolts Shetland Ltd
(OWN SALES) 26 North Road
Lerwick
Shetland ZE1 0PE
WHALSAY Leask Electrical
Harlsdale
Symbister, Whalsay
(OWN SALES) Shetland ZE2 9AA
NOR HERN IRELAND
BELFAST Owenmore House
(M27) Kilwee Industrial
Estate
Upper Dunmury Lane
Belfast
BT17 0HD
WALES
CARDIFF Guardian Industrial
(M28) Estate
Clydesmuir Road
Tremorfa, Cardiff
CF2 2QS
CLYWD Unit 6-7 Coed - Parc
(M14) Abergele Road
Rhuddlan
Clwyd
Wales
LL18 5UG
OSWESTRY Plas Funnon
Warehouse
(M17) Middleton Road
Oswestry
SY11 2PP
HAVERFORDWEST Cromlech Lodge
(M75) Ambleston
Haverfordwest
Pembrokeshire
SA62 5DS
DYFED Maes Y Coed
(M77) High Mead
Llanybydder
Carmarthenshire
SA40 9UL

8
ELECTROLUX SERVICE FORCE
o contact your local Electrolux Service Force Centre telephone [phone]
MIDLANDS
BIRMINGHAM 66 Birch Road East,
(M18) Wyrley Road
Industrial
Estate
Witton
Birmingham
B67DB
BOURNE Manning Road Ind
(M44) Estate
Pinfold Road
Bourne
PE10 9HT
BRIDGNORTH 65 St.Marys Street
(M72) Bridgnorth
Shropshire
WV16 4DR
GLOUCESTER 101 Rycroft Street
(M23) Gloucester
GL1 4NB
HEREFORD Unit 3
(M31) Bank Buildings
Cattle Market
Hereford
HE4 9HX
HIGHAM FERRERS 30 High Street
(M51) Higham Ferrers
Northants
NN10 8BB
ILKESTON Unit 2
(M43) Furnace Road
Ilkeston
DE7 5EP
LEICESTER Unit 7
(M22) Oaks Industrial Estate
Coventry Road
Narborough
Leicestershire
LE0 5GF
LINCOLN Unit 8 Stonefield Park
(M40) Clifton Street
Lincoln
LN5 8AA
NEWCASTLE 18-21 Croft Road
UNDER LYME Brampton Industrial
(M12) Estate
Newcastle under
Lyme
Staffordshire
ST5 0TW
REDDITCH 13 Thornhill Road
(M20) North Moons Moat
Redditch
Worcestershire
B98 9ND
TAMWORTH Unit 3
(M19) Sterling Park
Claymore
Tamworth
B77 5DO
WORCESTER Unit 1&2
(M73) Northbrook Close
Gregorys Mill Ind
Estate
Worcester
WR3 8BP
LONDON & EAS ANGLIA
BECKENHAM 11a Gardener Ind
(M79) Estate
Kent House Lane
Beckenham
Kent BR3 1QZ
CHELMSFORD Hanbury Road
(M47) Widford Ind Estate
Chelmsford
Essex
CM12 3AE
COLINDALE Unit 14
(M53) Capital Park
Capital Way
Colindale
London NW9 0EQ
ELTHAM 194 Court Road
(M78) Mottingham - Eltham
London SE9 4EW
ENFIELD 284 Alma Road
(M49) Enfield
London
EN3 7BB
GRAVESEND Unit B4,
(M57) Imperial Business
Estate
Gravesend
Kent
DA11 0DL
HARPENDEN Unit 4
(M46) Riverside Estate
Coldharbour Lane
Harpenden
AL5 4UN
LETCHWORTH 16-17 Woodsite Ind
(M50) Est.
Works Road
Letchworth
Herts
SG6 1LA
LONDON 2/4 Royal Lane
(M76) Yiewsley
West Drayton
Middlesex
UB7 8DL
MAIDENHEAD Reform Road
(M60) Maidenhead -
Berkshire
SL6 8BY
MOLESEY 10 Island Farm
(M61) Avenue
West Molesey
Surrey
KT8 2UZ
NEWBURY 9 Pipers Court
(M24) Berkshire Drive
Thatcham
Berkshire
RG19 4ER
IPSWICH Unit 6C
(M48) Elton Park Business
Centre
Hadleigh Road
Ipswich
IP2 0DD
NORWICH 2b Trafalgar Street
(M52) Norwich
NR1 3HN
SUNBURY Unit 1a
(M63) The Summit
Hanworth Road
Hanworth Ind Estate
Sunbury on Thames
TW16 5D
SOU H EAS
ASHFORD Unit 2
(M58) Bridge Road
Business
Estate
Bridge Road
Ashford
Kent
TN2 1BB
FLEET Unit 1
(M59) Redfields Industrial
Estate
Church Crookham
Fleet
Hampshire
GU13 0RD
HAYWARDS HEATH 21-25 Bridge Road
(M55) Haywards Heath
Sussex
RH16 1UA
SOU H WES
BARNSTAPLE Main Road
(M30) Fremington
Barnstaple
North Devon
EX31 2NT
BOURNEMOUTH 63-65 Curzon Road
(M26) Bournemouth
Dorset
BH1 4PW
BRIDGEWATER 6 Hamp Industrial
(M35) Estate
Bridgewater
Somerset
BRISTOL 11 Eldon Way
(M25) Eldonwall Trading
Bristol
Avon
BS4 3QQ
EMSWORTH 266 Main Road
(M33) Southboure
Emsworth
PO10 8 L
ISLE OF WIGHT Unit 8
(M34) Enterprise Court
Ryde Business Park
Ryde
Isle of Wight
PO33 1DB
NEWTON ABBOT Unit 2
(M29) Zealley Industrial
Estate
Kingsteignton
Newton Abbot
S. Devon
TQ12 3TD
PLYMOUTH 16 Faraday Mill
(M32) Cattledown
Plymouth
PL4 0ST
REDRUTH Unit 7D Pool Industrial
(M36) Estate
Wilson Way, Redruth,
Cornwall
TR15 3QW

9
BURNER RAPID SEMI-RAPID AUXILIARY
(large) (medium) (small)
POSITION MAX MIN MAX MIN MAX MIN
NOMINAL THERMAL
POWER kW 3.0 0.65 2.0 0.45 1.0 0.33
NOMINAL FLOW
RATE m
3
/h 0.286 0.062 0.190 0.043 0.095 0.031
NOZZLE REFERENCE 119 Adjust. 96 Adjust. 70 Adjust.
NOMINAL THERMAL
POWER kW 2.8 0.65 2.0 0.45 1.0 0.33
NOMINAL FLOW
RATE g/h 202 4 7 144 32 72 24
NOZZLE REFERENCE 8 6 4 0 7 1 3 2 5 0 2 8
OVERALL DIMENSIONS
Width: 580 mm.
Depth: 500 mm.
Height: 8 mm.
CU OU DIMENSIONS
Width: 550 mm.
Depth: 470 mm.
Thickness: 30 mm.
Ignition H Spark
Spa k Gene ato Isp a Cont ol's BF 50066 - 230-240V 0.6 YA T 120
Spa k Gap Fixed
Rear Left Burner (semi-rapid)
Heat Input 2.0 kW (6824 BTU/HR)
Front Left Burner (rapid)
Heat Input 3.0 kW (10236 BTU/HR)
Burner Dia. ap By-pass
1/100 mm
Auxilia y 28
Semi- apid 32
Rapid 40
Ae ation adjustment none
NATURAL GAS
0 mbar
TYPE OF
GAS
Characteristics
LPG GAS
8-30/37 mbar
1/100 mm
1/100 mm
VALUE = 49.92 M /Kg
VALUE = 37.78 M /m
3
Ws - 50.7 M / m
3
Rear Right Burner (semi-rapid)
Heat Input 2.0 kW (6824 BTU/HR)
Front Right Burner (auxiliary)
Heat Input 1.0 kW (3412 BTU/HR)
SUPPLY CONNEC IONS
Gas:
RC 1/2 inch (1/2 inch male) Rea ight hand co ne
Electric:
230-240V 50Hz supply, 3 co e flexible cable with non
ewi eable plug fitted with a 3 amp ca t idge fuse.
Instructions for the Installer
Engineers technical data
APPLIANCE CLASS: 3
APPLIANCE CA EGORY: II2H3+
APPLIANCE GAS SUPPLY:
Natu al gas G20 / 20mba

10
FITTING THE GAS HOB
WITHOUT A COOKER HOOD ABOVE
FITTING THE GAS HOB
WITH A COOKER HOOD ABOVE
700 mm
400 mm
400 mm
100 mm
55 mm
50 mm 50 mm
600 mm
700 mm
400 mm
400 mm
100 mm
55 mm
600 mm
50 mm 50 mm
FO 2369*
FO 2231*
Important safety requirements
This hob must be installed in acco dance with the Gas
Safety (Installation and Use) Regulations (Cu ent Edition)
and the IEE Wi ing Regulations (Cu ent Edition).
Detailed ecommendations a e contained in the following
B itish Standa ds Codes Of P actice: B.S. 6172/ B.S.
5440, Pa t 2 and B.S. 6891 Cu ent Editions.
The hob should not be installed in a bed sitting oom
with a volume of less than 20 m3. If it is installed in a
oom of volume less than 5 m3 an ai vent of effective
a ea of 110 cm2 is equi ed. If it is installed in a oom of
volume between 5 m3 and 10 m3 an ai vent of effective
a ea of 50 cm2 is equi ed, while if the volume exceeds
11 m3 no ai vent is equi ed.
Howeve , if the oom has a doo which opens di ectly to
the outside no ai vent is equi ed even if the volume is
between 5 m3 and 11 m3.
If the e a e othe fuel bu ning appliances in the same
oom, B.S. 5440 Pa t 2 Cu ent Edition, should be
consulted to dete mine the equisite ai vent equi ements.
Location
The hob may be located in a kitchen, a kitchen/dine o
bed sitting oom, but not in a bath oom o showe oom.
Befo e making the cut out in the wo ktop ensu e that the
edges of the hob that a e to be nea eithe a side o ea
wall have a minimum distance of 55 mm. between the
edge of the hob and the wall.
The minimum distance combustible mate ial can be fitted
above the hob is 400 mm. If it is fitted below 400 mm. a
space of 50 mm. must be allowed f om the edges of the
hob.
The minimum distance combustible mate ial can be fitted
di ectly above the hob is 700 mm.
A minimum distance of 100 mm. must be left between
the side edges of the hob and any adjacent cabinets o
walls.
Installation
IMPOR AN
This hob must be installed by qualified
personnel to the elevant B itish Standa ds.
Any gas installation must be ca ied out by a
egiste ed CORGI installe .
The manufactu e will not accept liability, should
the above inst uctions o any of the othe safety
inst uctions inco po ated in this book be
igno ed.
WHEN HE HOB IS FIRS INS ALLED
Once the hob has been installed, it is impo tant
to emove any p otective mate ials, which we e
put on in the facto y.
On the end of the shaft, which includes the GJ 1/2"
th eaded elbow, adjustment is fixed so that the washe
is fitted between the components as shown in the
diag am. Sc ew the pa ts togethe without using excessive
fo ce.

11
ON/OFF SWITCH
FLEX
OUTLET
ON/OFF SWITCH
FLEX
OUTLET
FO 0763
FO 0764
1
2
Dimensions a e given in mm.
Building In
Building over a cupboard or
drawer
If the hob is to be installed above a cupboa d o d awe
it will be necessa y to fit a heat esistant boa d below
the base of the hob on the unde side of the wo k
su face.
It is also ecommended to ca y out the elect ical
connection to the hob as shown in diag ams 1 and 2.
Building over a kitchen unit
with door
P ope a angements must be taken in designing the
fu nitu e unit, in o de to avoid any contact with the
bottom of the hob which can be heated when it is
ope ated. The ecommended solution is shown in
diag am 3.
The panel fitted unde the hob ("a") should be easily
emovable to allow easy access if technical
assistance is needed. The space behind the kitchen
unit ("b") can be used fo connections.
Rectangular cut-out size for hob
A) End of shaft with nut
B) Washe
C) Elbow
It is impo tant to install the elbow co ectly, with
the shoulde on the end of the th ead, fitted to the
hob connecting pipe.
Failu e to ensu e the co ect assembly will cause
leakage of gas.
FO 0814
Gas Connection
Connection to the gas supply should be with eithe igid
o semi- igid pipe, i.e. steel o coppe .
The connection should be suitable fo connecting to RC
1/2 (1/2 BSP male th ead).
When the final connection has been made, it is essential
that a tho ough leak test is ca ied out on the hob and
installation.
Ensu e that the main connection pipe does not exe t
any st ain on the hob.
550
470
55 min.
30
FO 2098
Dimensions a e given in mm.
FO 0264
Cut Out Size
The dimensions of the cut-out a e given in the diag am.
30
20 min
60
a
b
FO 1013
3

12
ermanent Connection
In the case of a pe manent connection, it is necessa y
that you install a double pole switch between the hob
and the elect icity supply (mains), with a minimum gap
of 3 mm. between the switch contacts and of a type
suitable fo the equi ed load in compliance with the cu ent
elect ic egulations.
The switch must not b eak the yellow and g een ea th
cable at any point.
Ensure that the hob supply cord does not
come into contact with surfaces with
temperatures higher than 50 deg. C.
FO 0390
F
Electrical connections
Any elect ical wo k equi ed to install this hob
should be ca ied out by a qualified elect ician o
competent pe son, in acco dance with the cu ent
egulations.
HIS HOB MUS BE EAR HED.
he manufacturer declines any liability should these
safety measures not be observed.
his hob is designed to be connected to a 230-240V
50Hz AC electrical supply.
Befo e switching on, make su e the elect icity supply
voltage is the same as that indicated on the hob ating
plate. The ating plate is located on the bottom of the
hob. A copy is attached on the back cove of this book.
The hob is supplied with a 3 co e flexible supply co d
inco po ating a 3amp plug fitted. In the event of having to
change the fuse, a 3amp ASTA app oved (BS 1362) fuse
must be used.
Should the plug need to be eplaced fo any eason, the
wi es in the mains lead a e colou ed in acco dance with
the following code:
G een and Yellow - Ea th
Blue - Neut al
B own - Live
 Connect the g een and yellow (ea th) wi e to
the te minal in the plug which is ma ked with
the lette 'E' o the ea th symbol o colou ed
g een and yellow.
 Connect the blue (neut al) wi e to the te minal
in the plug which is ma ked with the lette 'N' o
colou ed black.
 Connect the b own (live) wi e to the te minal in
the plug which is ma ked with the lette 'L' o
colou ed ed.
Upon completion the e must be no cut, o st ay st ands
of wi e p esent and the co d clamp must be secu e ove
the oute sheath.
A cut off plug inserted into a 13 amp socket is a
seriuos safety (shock) hazard. Ensure that the cut
off plug is disposed of safely.
FO 0199
a
Fitting the Hob into the worktop
Ca y out the building in of the hob as follows:
 put the seals supplied with the hob, on the
edges of the cut out: place them exactly on
the f ont and ea edge and at 50 mm. f om the
side edges, taking ca e that the seals meet
without ove lapping;
 place the hob in the cut out, taking ca e that it
is cent ed;
 fix the hob with the elevant fixing clamps and
sc ews, as shown in the diag am. When the
sc ews have been tightened, the excess seal
can be emoved.
The edge of the hob fo ms a double seal which p events
the ing ess of liquids.
Seal
F

13
A. IGNI OR SWI CH
B. IGNI OR UNI
B
L
N
0
1
2
3
4
5
6
220/240
A
Wiring Diagram
Fault Finding
reliminary Electrical Systems
Check
A. EARTH CONTINUITY CHECK - Appliance must be
electrically disconnected - meter set on W (Ohms) x
1 scale and adjust zero if necessary.
a) est leads from any appliance earth point to earth
pin on plug. Resistance should be less than 0.1
ý (Ohm), check all earth wires for continuity and
all contacts are clean and tight.
B. INSULATION CHECK - Appliance electrically
disconnected, all switches ON.
a) meter set on W(Ohms) x 1 scale.
est leads from L to N in appliance terminal block.
If meter reads «0» then there is a short circuit.
b) meter set on W (Ohm) x 100 scale.
Repeat test with leads from L to E. If meter reads
less than × (infinity) there is a fault.
NO E - Should it be found that the fuse has failed
but no fault is indicated - a detailed continuity check
(i.e. by disconnecting and checking each
component) is required to trace the faulty component.
It is possible that a fault could occur as a result of
local burning/arcing but no fault could be found under
test. However a detailed visual inspection should
reveal evidence of burning around the fault.
START
Isolate appliance
and carry out:
A: Earth Continuity
check.
Has inlet fuse blown?
Carry out:
C: Polarity check.
Electricity supply
should now be
satisfactory.
Carry out:
D: Resistance to
Earth check.
Inlet wiring
faulty.
Rectify any
fault.
Isolate appliance and
carry out:
B: Insulation check.
Rectify any fault
including replacing
fuses as necessary.
SOCKET
(face view)
PLUG (with cover
removed)
Earth Wire
Green/Yellow
Neutral Wire
Blue
Brown Blue Green
Yellow
Green
Yellow
Brown
Blue
( )
FUSE
( )
E
NL
NO YES
NO YES

14
Ignition System / Gas Ignition
YES
Check plug top fuse
and replace if
necessary
Check polarity and
earth continuity of
supply point
Check earth continuity
of appliance
Ignitor does not spark
Check fitting of burners
Check position of the
electrode
Check by pass simmer
adjusted
Light burner manually
Check gas supply at
burner
Check continuity from 'N' on the
mains connector block and "O" on
the ignitor unit
Check continuity from 'L' on the
mains connector block and the
taps ignition switches
Check continuity from ignition
switches connector to ignitor unit
Check continuity from the tip of
each electrode to the
terminals 1 to 4 on the ignitor
unit
Check for breaks in the
insulation
of the H leads
Change the taps
ignition switches
NO
Change the ignitor unit

15
Commissioning
When the hob has been fully installed it will be necessa y
to check the minimum flame setting. To do this, follow
the p ocedu e below.
- Tu n the gas tap to the MAX position and ignite.
- Set the gas tap to the MIN flame position then tu n
the cont ol knob f om MIN to MAX seve al times. If
the flame is unstable o is extinguished follow the
p ocedu e below.
Procedure:
Re-ignite the bu ne and set to MIN.
Remove the cont ol knob.
To adjust, use a thin bladed sc ewd ive and tu n
the adjustment sc ew (see diag am) until the flame
is steady and does not extinguish, when the knob
is tu ned f om MIN to MAX. Repeat this p ocedu e
fo all bu ne s.
Pressure esting
Remove left hand pan suppo t and f ont left bu ne
cap and c own.
Fit manomete tube ove the injecto .
Tu n on the bu ne gas supply and ignite anothe
bu ne .
The p essu e eading should be nominally 20mba
and must be between 17 mba and 25mba .
Tu n off the bu ne supplies.
F
F
Conversion from Natural Gas to
L G
It is impo tant to note that this model is designed fo use
with natu al gas but can be conve ted fo use with butane
o p opane gas p oviding the co ect injecto s a e fitted.
The gas ate is adjusted to suit.
Method
 Ensu e that the gas taps a e in the 'OFF' position
 Isolate the hob f om the elect ical supply
 Remove all pan suppo ts, bu ne caps, ings, c owns
and cont ol knobs.
 With the aid of a 7mm box spanne the bu ne injecto s
can then be unsc ewed and eplaced by the
app op iate LPG injecto s.
O ADJUS HE GAS RA E
With the aid of a thin bladed sc ewd ive completely
tighten down the by pass adjustment sc ew, which is
located down the cent e of the gas tap cont ol shaft.
Upon completion stick the eplacement ating plate on
the unde side of the hob.
IMPOR AN
he replacement/conversion of the gas hob
should only be undertaken by a competent
person.
Minimum adjustment screw

CUSTOMER CARE
55-77 High St eet
Slough
Be kshi e, SL1 1DZ
Tel: [phone]
© Elect olux Household Appliances Limited 2000
Grafihe MDM - Forlì