Electrolux EI30MO45GS - 30" Microwave User manual

Built-In Microwave
EI30MO45G S
electroluxappliances.com
Automatic Cooking Functions:
Features 11 Auto Cook options, 3 Auto Reheat
options and 6 Auto Defrost options for amazing
cooking flexibility. The 30-minute Keep Warm
function maintains dishes at optimal serving
temperatures.
Premium Sensor Cooking
Ten Sensor Touch options available to determine
exact cooking time of many commonly prepared
dishes. Sensors eliminate guesswork by auto-
matically calculating remaining cooking time.
Stage Cooking Options
Four cooking options ensure any dish requiring
multiple cooking stages is optimally prepared.
Easily defrost and cook with simple commands.
16" Glass Turntable
Effectively distributes heat evenly to ensure
food cooks thoroughly and precisely. Eliminates
cold spots for perfect results every time.
Wall OvensWarmer DrawersCooktopsBuilt-In Ranges
Freestanding
Ranges
MicrowavesVent HoodsDishwashersRefrigerators
FreezersUnder Counter
30" BUILT-IN SIDE-SWING DOOR MICROWAVE
Oven Cavity
Watts
Oven Interior
Interior Krypton Light
16" Glass Turntable
Control Panel Features
IQ-Touch™Electronic Controls
Front Display with Blue LED
Electronic Clock & Timer
Humidity Sensor
Power Levels
Touch Pad Controls
Auto Start
Auto Defrost Options
Auto Cook Options –
Pizza (1), Snacks (3), Kid’s Meals (3), Soften/Melt (4)
Auto Reheat Options –
Breads/Muffins (2), Pasta/Casserole (1)
Beverage (0.5-2.0 Cups)
Sensor Touch Options –
Cook (5), Reheat, Popcorn, Baked Potato,
Frozen Vegetables, Fresh Vegetables
Stage Cooking Options
Shorcut Options
Add 30 Seconds
Keep Warm
Custom Help Options
Panel Lock
Demo Mode
Adjustable Sound Level For Timers/Reminders
More/Less Function
Power Failure Indicator
Additional Features
Signature Soft-Arc Oven Door
Glass Window
Specifications
Oven Cavity Dimensions –
Height
Width
Depth
Overall Exterior Dimensions –
Height
Width
Depth (to Center of Arc)
Approved for Under-Counter Installation
Approved for Electric Single Oven Combination Installation*
Power Supply Connection Location
Voltage Rating
Connected Load (kW Rating) @120 Volts‡
Amps@120V
60" Electrical Cable
Microwave – Watts@120 Volt input
Frequency (Mhz)
Product Weight (Approx.) – Microwave with 30" Trim Kit
Shipping Weight (Approx.) – Microwave
Shipping Weight (Approx.) – 30" Trim Kit
‡For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate
ground wire. Appliance must be grounded for safe operation.
* Approved to be used in combination with any Electrolux Electric Single Wall Oven
and/or Warmer Drawer. (Not approved to be used above any gas wall oven.)
** 30" Trim Kit (EI30MO45TK) is supplied and includes Stainless Steel Faceplate and
Bottom Duct Assembly – shipped in separate box.
NOTE: Always consult local and/or national electric codes. Refer to Product Installation Guide
for detailed installation instructions on the web at www.electroluxappliances.com.
Specifications subject to change.
2.0 Cu. Ft.
1100
White
Yes
Yes
Yes
Yes
Yes
Yes
11
33
Yes
6
11
3
Yes
10
4
6
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
10-1/2"
17-3/8"
18-5/8"
18-1/16"
30"
19-1/8"
Yes
Yes
Right Top Rear
120V/60Hz/15 or 20A
1.5
13
Included
1500
2450
48 Lbs.
46 Lbs.
10 Lbs.
Microwave shown with Stainless Steel Faceplate

Built-In Microwave
EI30MO45G S
High standards of quality at Electrolux Major Appliances mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
USA
•250 Bobby Jones Expressway •Augusta, GA 30907 •1-877-4electrolux (1-877-435-3287) •
electroluxappliances.com
CANADA
•5855 Terry Fox Way •Mississauga, ON L5V 3E4 •1-800-265-8352 •
electroluxappliances.ca
EI30MO45G 01/08 © 2008 Electrolux Major Appliances, NA Printed in the U.S.A.
30" Built-In Microwave Specifications
•
Microwave Product Weight – 48 Lbs.
•
Voltage Rating –120V/60Hz/15 or 20 Amps
•
Connected Load (kW Rating) @120 Volts =1.5kW (For use on
adequately wired 120V, dedicated circuit having 2-wire service with a
separate ground wire. Appliance must be grounded for safe operation.)
•
Amps @120 Volts =13 Amps
•
Always consult local and/or national electric codes.
•
Allow 21" minimum clearance for 90° door swing.
•
Built-in installation requires use of 30"Trim Kit (EI30MO45TK) which is
supplied and includes Stainless Steel Faceplate and Bottom Duct
Assembly – shipped in separate box.
•
Minimum 20" deep oven cutout dimension is critical for proper installation
for oven and faceplate to fit flush against cabinet front.
•
Consult local building code, in the event that cutout opening may be
required to be enclosed with sides, ceiling and rear partition.
•
Full base of solid plywood or similar material required, capable
of supporting 100 Lbs.
•
Base must be level and front of cabinet square for proper operation.
•
Grounded outlet should NOT be located in shaded area, as indicated.
•
Can NOT be installed above any gas wall oven.
•
Built-In Convection Microwave can be built in alone or is approved to be
used in combination with any Electrolux Electric Single Wall Oven and/or
Warmer Drawer.
•
When used in combination with another Electrolux built-in product, a
minimum clearance of 2-7/8" required from bottom of Built-In Microwave
cutout to top edge of companion product’s faceplate, leaving a 2" visible
gap between both product faceplates.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxusa.com for detailed instructions.
*Note: When used in combination with
another Electrolux built-in product, a
minimum clearance of 27/8" required from
bottom of Built-In Microwave cutout to top
edge of companion product’s faceplate,
leaving a 2"visible gap between both
product faceplates
120V/60Hz
grounded outlet
20" min.
4" 6"
4"
251/4"min.
253/8"max.
161/4"
min.
163/8"
max.
Bottom Duct Assembly
Outlet should
NOT be located
within shaded
area
30"
Allow at least
21" clearance for door
depth when open
18 1/16"
24 "
153/4"
Power
cord
location
(right
top rear)
Faceplate
133/8 "
25/16"
30"min.
20"
min.
7/8"
Faceplate
overlap
161/4"
min.
163/8"
max.
Full
plywood
base
required
to support
100 lbs.
251/4"min.
253/8"max.
2" (visible
gap)*