Electrolux Built-In Dishwasher User manual

15995432258
Built-in Side by Side Refrigerator
May 2005

25995432258
ATTENTION!!!
This service manual is intended for use by persons having electrical and mechnical
trainingandalevelofknowledgeofthesesubjectsgenerallyconsideredacceptableinthe
appliancerepairtrade. ElectroluxHomeProducts cannotberesponsible, norassumeany
liability, for injury or damage of any kind arising from the use of this manual.
©2001 White Consolidated Industries
SAFE SERVICING PRACTICES - ALL APPLIANCES
To avoid personal injury and/or property damage, it is important that Safe
ServicingPracticesbeobserved. Thefollowingaresomelimitedexamplesofsafe
practices:
1. DO NOT attempt a product repair if you have any doubts as to your ability to
complete it in a safe and satisfactory manner.
2. Before servicing or moving an appliance:
• Remove the power cord from the electrical outlet, trip the circuit breaker to
the OFF position, or remove the fuse.
• Turn off the gas supply.
• Turn off the water supply.
3. Never interfere with the proper operation of any safety device.
4. USEONLYREPLACEMENTPARTSCATALOGEDFORTHISAPPLIANCE.
SUBSTITUTIONS MAY DEFEAT COMPLIANCE WITH SAFETY
STANDARDS SET FOR HOME APPLIANCES.
5. GROUNDING: The standard color coding for safety ground wires is GREEN,
orGREENwithYELLOWSTRIPES.Groundleadsarenottobeusedascurrent
carrying conductors. It is EXTREMELY important that the service technician
reestablish all safety grounds prior to completion of service. Failure to do so
will create a hazard.
6. Prior to returning the product to service, ensure that:
• All electrical connections are correct and secure
• All electrical leads are properly dressed and secured away from sharp
edges, high-temperature components, and moving parts
• All non-insulated electrical terminals, connectors, heaters, etc. are
adequately spaced away from all metal parts and panels
• All safety grounds (both internal and external) are correctly and securely
connected
• All panels are properly and securely reassembled

35995432258
Table of Contents
3-Way Valve .................................................................................................................................40
Auger Motor .................................................................................................................................32
Casters and Leveling ....................................................................................................................26
Components ................................................................................................................................. 23
Component Locator Views ...........................................................................................................12
Component Resistance Values ...................................................................................................... 8
Compressor..................................................................................................................................39 - 61to65
Control Features ............................................................................................................................10
Cube Motor and Cube Reed Switch ..............................................................................................32
Defrost Cycles ...............................................................................................................................43
Diagnostic Mode ...........................................................................................................................54
Dispenser Control Panel ................................................................................................................34
Dispenser Heater ...........................................................................................................................37
Dispenser Switch ...........................................................................................................................37
Doors ............................................................................................................................................ 23
Door Closer Assembly ...................................................................................................................25
Door Switches ............................................................................................................................... 41
Door Water Line Replacement .......................................................................................................38
Drain Pan ...................................................................................................................................... 26
Drier .............................................................................................................................................. 40
Duct Door Assembly ......................................................................................................................36
Evacuation and Charging Procedure ............................................................................................. 16
Fans .............................................................................................................................................. 44
Freezer Evaporator Assembly ....................................................................................................... 46
Freezer Evaporator Components .................................................................................................. 49
Freezer Heater Testing .................................................................................................................. 46
Fresh Food Evaporator Assembly ................................................................................................. 50
Fresh Food Evaporator Components ............................................................................................ 52
Fresh Food Heater Testing ............................................................................................................ 50
Heat Exchanger ............................................................................................................................. 39
Icemaker Controls ..........................................................................................................................11
Icemaker Fill Tube and Heater .......................................................................................................31
Ice Bin and Icemaker .....................................................................................................................31
Ice Dispenser ................................................................................................................................ 35
Installation Example 42" Model ......................................................................................................5
Interior Airfl ow .............................................................................................................................17
Interior Lights ................................................................................................................................42
Introduction ................................................................................................................................... 4
Machine Compartment Access Door .............................................................................................23
Main Switch ..................................................................................................................................34
Mufflers .........................................................................................................................................39
Nomenclature ............................................................................................................................... 9
Power Control Board (PCB) ..........................................................................................................27
Refrigerant Flow ............................................................................................................................14
Refrigeration Components .............................................................................................................13
Refrigeration System .....................................................................................................................13
Replacing the Freezer or Fresh Food Evaporator ........................................................................ 52
Schematics ................................................................................................................................... 58
ServiceDiagnostics ...................................................................................................................... 54 to 65
Technical Data ............................................................................................................................... 8
Terminal Block Panel .....................................................................................................................29
Thermistors ................................................................................................................................... 42
Troubleshooting Notes .................................................................................................................. 57
Water Valve and Water Tank ......................................................................................................... 35
IntroductionINTRODUCTION

45995432258
The new Profi le Built-In Side by Side refrigerator has the following features:
Separate freezer and fresh food evaporators are recessed into the machine compartment for
increased effi ciency and interior space savings.
3-Way valve directs refrigerant fl ow where needed.
High-and low-side sealed system muffl ers quiet the operation.
Inverter is built into the power control board (PCB).
Combined dispenser and temperature control board provides customer control and test mode
operations.
Dispenser cube motor and cam replaces solenoid-operated cube mechanism.
Room ambient thermistor aids power control board (PCB) operation.
Component electrical testing is performed at the machine compartment-mounted terminal block.
Rear leveling mechanism is front-adjustable.
Installation Example 42" Mo
INTRODUCTION
•
•
•
•
•
•
•
•
•

55995432258
INSTALLATION EXAMPLE 42” MODEL
THE INSTALLATION SPACE
* The finished cutout width must be:
41-1/2” for 42” models
Water and Electrical Locations
The opening must be prepared with the
electrical and water supply located as shown.
The cutout depth must be 24"
The refrigerator will project forward, slightly
beyond adjacent cabinets, depending on
your installation.
Additional Specifications
• A 120 volt, 60Hz, 15 or 20 amp power
supply is required. An individual properly
grounded branch circuit or circuit breaker
is recommended. Install a properly
grounded 3-prong electrical receptacle
recessed into the back wall. Electrical must
be located on rear wall as shown.
Note: GFI (ground fault interrupter) is not
recommended.
• Water line can enter the opening through
the floor or rear wall. The water line installed
should be 1/4" O.D. copper tubing between the
cold water line and water connection location.
The line should be long enough to extend to
the front of the refrigerator. Installation of an
easily accessible shutoff valve in the water line
is required.
*Shipping height
The front height
may be adjusted
from 83-1/2" to 84-1/2"
by adjusting front and
rear leveling legs a
maximum of 1".
DIMENSIONS AND CLEARANCES
Product Clearances
These refrigerators are equipped with a 2
position door stop. The factory set 130° door
swing can be adjusted to 90° if clearance to
adjacent cabinets or walls is restricted
Allow minimum clearances for Freezer
door (Dimension A) and Fresh Food door
(Dimension B) for a full 130° door swing
and to allow for drawer removal.
Four inch (4") minimum clearance is required
when door swing is adjusted to 90°. If the 90°
door stop position is used, drawer access is
maintained, but drawer removal is restricted.
7”
May Change with
our handle
Wood Panel 70 LB food door 30 LB freezer door

65995432258

75995432258
DISCONNECT POWER CORD BEFORE SERVICING
IMPORTANT - RECONNECT ALL GROUNDING
DEVICES

85995432258
To change the
Icemaker Controls
Allpartsof thisappliancecapable ofconducting
electrical current are grounded. If grounding
wires, screws, straps, clips, nuts or washers
used to complete a path to ground are removed
for service, they must be returned to their
original position and properly fastened.
CAUTION
To avoid personal injury when servicing the
condensing unit, stand on a ladder which will
give enough support to allow removal of the top
panel and safely allow access to service the unit.
REFRIGERATION DIAGNOSIS
ELECTRICALSPECIFICATIONS
Max Defrost Control
w/No Door Openings........................16 hrs
Evap Defrost Thermistor........68°F (FZ)..63°F (FF)
Electrical Rating: 115VAC 60 HZ.............5.4 amp
Maximum Current Leakage......................0.75 mA
Maximum Ground Path Resistance...............0.1 W
Energy Consumption Model 42........50.5 KWh/mo
Energy Consumption Model 48......53.75 KWh/mo
COMPOENENT RESISTANCE VALUES
FF fan motor ……………………..............1600 &! ± 20%
FZ fan motor ………………………….......1600 &! ± 20%
Condenser fan motor ………………........1600 &! ± 20%
Auger motor ………………………..............3.7 &! ± 15%
Cube motor …………………………….....2091 &! ± 10%
Cover motor ……………………………....2091 &! ± 10%
Defrost heater FZ ……..................................44 &! ± 7%
Drain heater FZ ..........................................377 &! ± 7%
Sub-heater FZ ………...............................1322 &! ± 7%
Defrost heater FF .......................................120 &! ± 7%
Drain heater FF …......................................440 &! ± 7%
Fill-tube heater .……….............................2645 &! ± 7%
Dispenser heater (Recess)………………..1889 &! ± 7%
Compressor (between the different
phase) …………….....................11. 7 &! ± 7% / 1 phase
3- way valve …………………………..40 ± 4 &!/ 1 phase
Water valve (Ice maker) …………...............180 &! ± 7%
Water valve (Dispenser) ..………................325 &! ± 7%
Technical Data
Nomenclature
TECHNICAL DATA
IMPORTANT SAFETY NOTICE
This information is intended for use by individuals
possessing adequate backgrounds of electrical,
electronic and mechanical experience.Any
attempt to repair a major appliance may result
in personal injury and property damage. The
manufacturer or seller cannot be responsible for
the interpretation of this information, nor can it
assume any liability in connection with its use.
NO LOAD PERFORMANCE
Control Position 37-0°F and
Ambient Temperature of: 70°F 90°F
Fresh Food °F 37-42 36-43
Frozen Food °F (-2)-2 (-2)-5
Percent Running Time, %..........35-45 65-75
REFRIGERATION DIAGNOSIS
To access the low pressure side of the system,
install a line tap valve on the process tube
extending from the compressor case.
REFRIGERATION SYSTEM
Refrigerant Charge (R134a)......................8.11 ounces
Compressor......................................738-1270 BTU/hr
Minimum Compressor Capacity
Vacuum..........................................................26 inches
Minimum Equalized Pressure
@70°F.............................................................66 PSIG
@90°F.............................................................74 PSIG

95995432258
MODEL AND SERIAL NUMBER INFORMATION
Serial Plate
Location
The Serial
plate is located
at the top of
the fresh food
section on the
right-side wall.
It contains
the model and
serial numbers
and specifi es
the minimum
installation clearances, electrical voltage,
frequency, maximum amperage rating, and
refrigerant charge.
Mini-Manual
The mini-manual is located behind the
grille panel at the top of the refrigerator.
When service is completed, return the
mini-manual to its original location for
future use.
E42BS85EPS THE PS IS FOR STAINLESS STEEL
E42BS75ETT THE TT IS FOR MODEL WITH TRIM ON DOORS
Serial Number
The first letter tells us where the product was made, the
second letter tells us what type product it is. The first
number is the year the product was made. The next two
numbers are the week the product was made.
Example BA51400000,
B - Is the Anderson refrigerator factory.
A - Is a refrigerator
5 - Is 2005
14 - Is week 14
The rest of the numbers are the sequence number for week
14 of 2005.

105995432258
Icemaker Controls
Control Features
The temperature controls are preset in the factory at 37°F for the
refrigerator compartment and 0°F for the freezer compartment. Allow
24 hours for the temperature to stabilize to the preset recommended
settings.
The temperature controls can display both the SET temperature
as well as the actual temperature in the refrigerator and freezer.
The actual temperature may vary slightly from the SET temperature
based on usage and operating environment.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
Once the desired temperature has been set,
the temperature display will clear after 10 seconds.
To display the temperature, the DISPLAY TEMP
button may be tapped.
Several adjustments may be required. Each time
you
adjust controls, allow 24 hours for the refrigerator
to
reach the temperature you have set.