Electrolux ERES31800W User manual

instruction book
gebrauchsanweisung
notice d'utilisation
gebruiksaanwijzing
refrigerator
kühlgeräte
réfrigérateur
koelkast
ERES31800W, ERES31800X

We were thinking of you
when we made this product

3
Welcome to the world of Electrolux
Thank you for choosing a first class product from Electrolux, which hopefully will
provide you with lots of pleasure in the future. The Electrolux ambition is to offer
a wide variety of quality products that make your life more comfortable. You find
some examples on the cover in this manual. Please take a few minutes to study
this manual so that you can take advantage of the benefits of your new machine.
We promise that it will provide a superior User Experience delivering
Ease-of-Mind. Good luck!

4
The following symbols are used in this manual:
Important information concerning your personal safety and
information on how to avoid damaging the appliance
General information and tips
Environmental information
Scrapping old appliances
T
he symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it shall be handed over
to the applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or
the shop where you purchased the product.

5
Safety instructions
Your new fridge may have other
functions compared to your previous
one.
Carefully read these instructions to
learn how the appliance works and
how to care for it. Keep the instruction
booklet. It will come in handy if you
later sell the cabinet or give it to
somebody else.
These warnings are provided in the
interests of your safety. Ensure that
you understand them all before
installing or using the appliance. Your
safety is of paramount importance. If
you are unsure about any of the
meanings or warnings contact the
Customer Care Department.
For the User
· The refrigerator is intended for the
storage of foodstuffs and the
production of cold water, with or
without carbon dioxide, for normal
household use in accordance with
these instructions.
· If the gas cylinder is used for other
purposes than that intended or if it is
filled by an unauthorised person, all
guarantees automatically become null
andvoid.Inordertoensurereliable
functioning, only an Electrolux Cylinder
may be used.
·Do not keep explosive gases or
liquids in the refrigerator or freezer
compartment. They may explode and
cause injury and material damage.
·Do not let sharp objects come into
contact with the refrigerating system
on the back of and inside the cabinet.
If the refrigerating system is punctured,
the cabinet will be damaged and
foodstuff inside may spoil.
·Do not keep carbonised drinks or
bottles in the freezer compartment.
The glass bottles may break.
·The cabinet is heavy. The edges
and projecting parts of the cabinet
may be sharp. Be careful when moving
the cabinet and always use gloves.
Child Safety
·Pay attention so that small children
do not gain access to the operating
controls or the inside of the cabinet.

6
Contents
Welcome to the world of Electrolux 3.
Scrapping old cabinets 4...........
Safety instructions 5............
Contents 6......................
USE 7...........................
Control Panel 7...................
DISPLAY 8.......................
Functions Menu 8.................
Select /Switch off /Switch on 8......
Temperature regulation 8...........
Switching off 9....................
Ambient Temperature Function 9.....
Child Lock Function 9..............
Shopping Function 9...............
Eco mode Function 9..............
Chill Mode Function 10.............
Use of the fridge compartment 10....
Temperature regulation 10..........
Holiday Function "H" 10............
Door open acoustic alarm 11........
Control Panel (water dispenser) 11...
Cabinet interior 13.................
HINT and TIPS 14.................
Saving energy 14..................
Food Storage 14..................
Protect the environment 14.........
MAINTENANCE and CLEANING 15..
Removing the ventilation grille 15....
Cleaning 15......................
Servicing and cleaning the water
dispenser. 15..................
Service during operation 16.........
To change the lamp 16.............
Change of carbon filter 16..........
Defrosting the fridge 17.............
When the appliance is not in use 17..
SOMETHING NOT WORKING 17....
TECHNICAL SPECIFICATION 20....
Permissible water pressure (to ensure
reliable function). 20............
INSTALLATION 20.................
Unpacking 20.....................
Remove the transport supports 21...
Cleaning 21......................
Connecting the water hose. 21......
Electrical cord 22..................
Installation of carbon filter 22........
Installing the cabinet 22............
When the water system is started for the
first time 24...................
Electrical connection 25............
Guarantee/Customer Service 26.....
EUROPEAN GUARANTEE 27.......
www.electrolux.com 17............

7
USE
Position and clean the cabinet as
explained in the section "Installation".
Check that the drain hose is located
over the drip bowl behind the
refrigerator. Also ensure that the drain
hose is connected to the box. See the
illustration.
Beforeinsertingthepower plugintothe
outlet and switching on the cabinet for
the first time, leave it standing upright
for about 4 hours. Otherwise the
compressormay sustain damage. This
time will allow the oil sufficient time to
return to the compressor.
Control Panel
AE
D
C
B
A - Appliance button ON/OFF
B - Temperature regulation button
C - Temperature and function indicator
D - Function button
E - Confirmation button

8
DISPLAY
Excessive temperature alarm and
Door open acoustic alarm
Indicator (if foreseen)
If on the temperature indicated is
the ambient temperature
Positive or negative
T
emperature
indicator
Negative
T
emperature indicator
Temperature indicator
If on the Child Lock funktion is on
If on the Shopping function is on
If on the Chill mode function is on
If on the Eco Mode function is on
First switch on
After plugging the plug into the power
outlet, if the display is not illuminated,
press key (A), appliance on.
For a correct storage of the food select
the Eco mode function that guarantee
the following temperature is set:
+5°C in the fridge
· To select a different temperature
see "Temperature regulation".
Functions Menu
By activating the key D the functions
menu is operating. Each function
could be confirmed by pressing button
E. If there is no confirmation after
some seconds the display will go out
from the menu and return in normal
condi-tion.
The following functions are indicated:
Ambient Temperature
Child Lock function
Shopping function
Eco Mode function
Drinks Chill function
Select /Switch off /Switch on
Temperature regulation
The temperature may be regulated by
pressing the key (B) to set the desired
temperature.
By pressing the key B the current tem-
peraturesetting flashesonthe indica-
tor and by pressing the key B again it
is possible to change it.
Youconfirmthechoiceofthetempe-
rature either by pressing the key E,
(you will hear the buzzer) or by waiting
for some seconds (you will not hear
the buzzer).
Then the indicator shows again the
inside compartment temperature.

9
The newly selected-temperature must
be reached after 24 hours.
After a long period out of use it is not
necessary to set again the temperature
because it remains stored.
Attention!
During the stability period by the first
starting the temperature displayed can
not correspond to the setting tempe-
rature. During this time it is possible
that the temperature displayed is
different than the setting temperature.
Switching off
The appliance is shut off by pressing
key (A) for more than 1 second. After
this, a countdown of the temperature
from -3 -2 -1 will be shown.
Ambient Temperature Function
The ambient temperature function is
activated by pressing key D (several
times if necessary) until the corres-
ponding icon appears .
In this condition the selected tempera-
ture is the ambient temperature.
You must confirm the choice by
pressing key E within few seconds.
You will hear the buzzer and the icon
remains lighted.
It is possible to de-activate the function
atanytimebypressingkeyDuntilthe
corresponding icon will flash and then
key E.
Child Lock Function
The Child Lock function is activated by
pressing key D (several times if
necessary) until the corresponding icon
appears .
You must confirm the choice by pres-
sing key E within few seconds. You will
hear the buzzer and the icon remains
lighted.
In this condition any possible operation
through the keys does not cause any
change as long as this function is
activated.
It is possible to de-activate the function
atanytimebypressingkeyDuntilthe
corresponding icon will flash and then
key E.
Shopping Function
If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activat-
ing the Shopping function to chill the
products more rapidly and to avoid
cwarmingtheother foodwhich is
alreadyin therefrigerator.
T
he Shopping function is activated by
pressing key D (several times if neces-
sary) until the corresponding icon
appears You must confirm the
choice by pressing key E within few
seconds. You will hear the buzzer and
the icon remains lighted.
The Shopping function shuts off auto-
matically after approximately 6 hours.
It is possible to de-activate the function
atanytimebypressingkeyDuntilthe
corresponding icon will flash and then
key E.
Eco mode Function
The Eco mode function is activated by
pressing key D (several times if neces-
sary) until the corresponding icon
appears . You must confirm the
choice by pressing key E within few
seconds. You will hear the buzzer and
the icon remains lighted.

10
T
he Eco mode function is activated by
pressing key D (several times if neces-
sary) until the corresponding icon
appears . You must confirm the
choice by pressing key E within few
seconds. You will hear the buzzer and
the icon remains lighted.
In this condition the chosen tempera-
tures are automatically set (+ 5°C and
- 18°C), in the best conditions for
storing food.
It is possible to de-activate the function
at any time by changing the selected
temperature in one of the compart-
ment.
Chill Mode Function
The Quick Chill function permits the
rapid coolingofcansandbottles
takingforced cold air intothem.
Put the drinks on the Quick Chill shelf
andopen theair lever till themaxi-
mum.
The Quick Chill function is activated by
pressing key D (several times if
necessary) until the corresponding icon
appears .
When the cooling is finished de-acti-
vate the function by pressing key D
until the corresponding icon will flash,
then key E and dispose the air lever to
the minimum .
Use of the fridge compartment
Temperature regulation
The temperature of this compartment
may be regulated between +2°C and
+8°C.
During normal functioning the indicator
shows the temperature inside the
fridge.
Attention!
Difference between the temperature
displayed and temperature setting is
normal. Especially when:
- a new setting has recently been
selected
- the door has been left open for a
long time
- warm food has been placed in the
compartment.
Holiday Function "H"
The holiday function sets the tempera-
ture at + 15°C.
This function allows you to keep the
refrigerator shut and empty during a
long holiday period ( e. g. the summer
holidays) without the formation of a
bad smell.
The Holiday Function H may be regu-
lated by pressing the key B. By pres-
sing the key B the current temperature
setting flashes on the indicator. Press
thekeyBagain.Whenonthedisplay
appears the letter H confirm the choice
of the temperature or by pressing the
key E, (you will hear the buzzer) or by
waiting for some seconds (you will not
hear the buzzer).
Now the refrigerator is in the Holiday
function in the energy saving mode
and the indicator shows the letter H.
It is possible to de-activate the function
at any time by changing the selected
temperature in the compartment.

11
Attention!
The fridge compartment must be
empty with Holiday function on.
Door open acoustic alarm
An acoustic alarm will sound when the
door is left open for around 5 minutes.
The door open alarm conditions are
indicated by:
- flashing of the icon ;
- sounding of buzzer.
Press the key (E) to stop the acoustic
alarm.
When normal conditions are restored
(door closed):
- the acoustic alarm will stop.
Control Panel (water dispenser)
HIN
L
MJK
H. Yellow indicator lamp
Lights up when the locking function
has been activated.
I. Button for carbonated water.
-Usedforthechoiceofcarbonated
water.
- For the engagement and
disengagement of the locking function.
J. Button for ordinary water.
- Used for the choice of ordinary water.
- Switches the background lighting on
and off.
- Switches off the indicator lamp for
water filter replacement.
K. Yellow indicator lamp
Lights up when the water filter must be
changed.
L. Water out-feed
Activated when a glass or something
similar is pressed upwards against the
flap.
M. Flap
N. Lighting
Carbon filter's function:
The built-in carbon filter means that
strong smelling groceries can be
placed near other groceries without
affecting their taste or aroma.

12
The functions of the water-
dispenser
The locking function:
The locking function is activated by the
production plant.
For temporary unlocking:
Keep the button (I) or (J) pressed in for
about three seconds until the yellow
indicator lamp (H) goes out. The lock-
ing function is re-activated automati-
cally after about three seconds.
For permanent unlocking:
Keep the buttons (I) and (J) pressed in
at the same time for about three
seconds. The button (I) or (J) lights up
to indicate unlocking.
To activate the locking function:
Keep the buttons (I) and (J) pressed in
at the same time for about three
seconds. Activation is indicated by the
yellow indicator lamp (H) lighting up.
Selecting and obtaining water:
Before obtaining water, selection is
carried out either by pressing the
button for carbonated water (I) or the
button for ordinary water (J). The
actual choice is indicated by the
button concerned lighting up. The
selection of water can be changed
while the water is running.
Water is obtained by pressing a glass
or other container against the opening
(M). Stop the water flow by moving the
glass or container downwards away
from the opening (M). Any water that
drips or is spilled is collected in the
drip bowl below the water dispenser.
When carbonated water is being
obtained, there is a slight afterflow
when the glass is removed. The drip
bowl can be detached and emptied
when necessary.
Lighting:
The water dispenser lighting (N) goes
on automatically when water is
obtained.
For continuous lighting:
1. Make sure that the water dispenser
is unlocked.
2. Then hold the button for ordinary
water (J) pressed in for about three
seconds until the lighting goes on.
The lighting then goes on with about
50 % of its full intensity.
To switch off the lighting:
1. Ensure that the water dispenser is
unlocked.
2. Then hold the button for ordinary
water (J) pressed in for about three
seconds until the lighting goes out.
Indicator lamp for the water filter:
The water dispenser is fitted with an
indicator lamp (K) which shows when it
is time to change the water filter. When
the indicator lamp stays on, then the
water filter has been utilised to about
80 % of its expected lifetime. In this
situation, it is recommended that you
buy a replacement filter. When the
indicator lamp starts flashing, the
water filter has been utilised to 100%
of its lifetime. Replace the filter without
delay.
After replacing the filter cartridge, see
the section "Service during operation".
The indicator lamp can be switched off
by holding the button for ordinary
water (J) pressed in for about three
seconds until the indicator lamp goes
out.

13
Cabinet interior
The shelves and door compartments
are removable and can easily be
re-arranged.
Certain shelves must be lifted up by
the rear edge to enable them to be
removed.
The lower door compartment and the
glass shelf above the vegetable drawer
must not be moved. They are required
for proper air circulation inside the
cabinet.
Shelves with a raised edge should be
placed with the raised edge facing the
rear wall of the cabinet.
The vegetable drawer has a ventilation
edging to increase the circulation of air
and reduce the risk of condensation.
The vegetable drawer has two
moveable partitions with five different
choices in order to separate different
vegetables.
Bottle- and can holder
Thesideofthebottleandcanholderis
moveable to enable a more flexible
placement of cans and bottles in front
of the grid. To allow the holder to be
moved easier, when moving sideways,
press the shelf backwards.
During chilling of cans or bottles the
article should be centrally placed in
front of the grid to obtain the best
chilling effect.
The bottle support can be pulled out
when chilling larger bottles.
For a description of this functions start
and stop, see under heading Quick
Chill.
Quick chill shelf:
The lower Quick chill shelf can be
placed in one of the upper grooves. To
maintain the best performance the
shelf should be placed in the second
groove from the top.

14
Dismantling of the bottle- and
can holder.
Take out the Quick Chill shelf with
holder from the cabinet.
To loosen the holder from the shelf,
bend the hooks/brackets that surround
the backside of the shelf.
HINT and TIPS
Saving energy
· Pay careful attention to where the
cabinet is placed. See the section
"Installation". When installed correctly,
the cabinet will consume less energy.
· Try to avoid keeping the door open
for long periods, or opening the door
too frequently as warm air will enter the
cabinet, and cause the compressor to
switch on unnecessarily often.
· Ensure there are no obstructions
preventing the door from closing
properly.
· Thaw frozen food in the fridge. This
will ensure safer defrosting of foods
and reduce the work of the
refrigeration unit
· It is advisable to periodically clean the
refrigeration system at the back of the
appliance with a duster or vacuum
cleaner.
· Always leave warm food to cool
down to room temperature before
placing in the fridge.
· Make sure the door gasket is
complete and always clean.
Food Storage
· To obtain the best results from your
appliance, neither hot foods nor liquids
which may evaporate, should be
placed in the larder compartment.
· Avoid buying frozen food if you can
not store it straight away. The use of
an insulated container is advisable.
When you arrive home place the
frozen food in the freezer immediately.
· Ensure that food placed in the freezer
is dated and labelled and used in date
order to ensure that food is consumed
at its best. Remove suspect food from
you refrigerator and clean, refer to
cleaning and maintenance.
Protect the environment
· Hand over the cabinet packaging
and discarded fridges and freezers to a
recycling station. Contact your local
council or Environmental Health office
for more information.
· Keep foodstuff in re-usable
containers. Cut down on disposable
material as much as possible.
· When cleaning the cabinet, use a
mild washing-up detergent.
· Follow the advice in the section
"Saving energy"
· The door gasket and coolant used in
this cabinet will not harm the ozone
layer.

15
· All parts in the packaging can be
recycled.
· The cabinet has been designed for
easy dismantling and subsequent
recycling.
MAINTENANCE and CLEANING
Removing the ventilation grille
The ventilation grille can be removed,
e.g. to wash the grille.
Make sure the door is open when
removing the ventilation grille. Unsnap
the upper edge of the grille by pulling
outward/downward. Then pull the grille
straight out to completely remove it.
Cleaning
Clean the cabinet at regular intervals.
Internal Cleaning
Disconnect the appliance from
electricity supply.
Clean the inside and accessories with
warm water and bicarbonate of soda
(5ml to 0,5 litre water) Rinse and dry
thoroughly.
Regularly check the door seals and
wipe clean to ensure they are clean
and free from debris.
External Cleaning
Use water/neutral soap emulsion for
cleaning the surface of stainless steel,
anti-finger-print coated. Absolutely not
touseabrasivepaste.
Wash the outer cabinet with warm
soapy water. Remove the ventilation
grille (see the section "Removing the
ventilation grille") and vacuum-clean
under the cabinet. Once or twice a
year dust the condenser (black grille)
and the compressor at the back of the
appliance, with a brush or vacuum
cleaner, as an accumulation of dust
will affect the performance of the
appliance and cause excessive
electricity consumption.
When moving the cabinet, lift it by the
f
avoid scratching the floor.
Servicing and cleaning the water
dispenser.
Never use cleaning agents with a
grinding or aggressive effect.
When necessary, clean the surfaces of
the dispenser and the water container
that are accessible from the outside,
using only a soft cloth and warm water.
The dispenser drip bowl can be
cleaned with a tepid solution of manual
dishwashing agent and water.

16
If the system is not be used for a long
period, it is advisable to remove the
filter and empty out the water. Then
place it in a sealed plastic bag. Store
the filter in a freezer. Turn off the water
connection to the refrigerator.
When the refrigerator is to be used
again, rinse the system through
thoroughly by draining off at least three
litres (5 pints) of water. Before re-fitting
the filter, all its parts must be
thoroughly thawed out.
If necessary, all systems containing
water must be sanitized by ordering
the necessary sanitizing kit through
Electrolux Service Force Centre (tel:
[phone]) or through our
website www.electrolux.co.uk.
Service during operation
The water filter is replaced as follows:
Place a piece of kitchen tissue or a
dishcloth in the space under the filter.
Remove the filter by turning it
clockwise. A small amount of water will
run out. Dry off and fit the new filter.
See the section "When starting the
water system for the first time".
The water connection does not need
to be switched off when changing the
filter.
Replacement filters can be ordered
from Electrolux Service Force Centre.
See the section "Service and
replacement parts".
The gas cylinder is replaced as follows:
remove the gas cylinder and move
over the adapter to the new cylinder.
The replacement gas cylinder is
obtained through your local dealer.
To change the lamp
The light is switched on automatically
when the door is opened. Before
replacing the light bulb, disconnect the
power plug from the outlet.
Disassemble the lamp by using a
screwdriver in the recess on the lamp
insert.
Assemble a new lamp by guiding it
into a centred position and press until
it snaps.
Use a halogen bulb of the same type,
maximum rating of 20 W.
Change of carbon filter
To maintain the best performance the
carbon filter should be changed once
a year with normal usage.
New carbon filters can be purchased
from your local dealer. The filter is
placed behind the grill and can be
reached by opening the cover. The
cover can be opened by simulta-
neously pressing the lever on the right
of grill (1) and turning the cover
outward (2). The carbon filter is then
pulled out of its slot (3).
The new carbon filter is placed in the
existing slot - The filter should be
handled carefully so fragments don't
loosen from the surface.
1

17
23
Defrosting the fridge
The fridge is defrosted automatically
every time the compressor stops. Frost
formation can be prevented by:
· not putting warm foodstuff inside
the cabinet.
· avoiding frequently opening the
door or keeping it open too long.
When the appliance is not in use
Disconnect the appliance from
electricity supply.
Empty all foods and clean the
appliance, leaving the doors ajar to
prevent unpleasant smells.
If the cabinet will be kept on, ask
somebody to check it once in a while
to prevent the food inside from spoiling
in case of a power failure.
SOMETHING NOT WORKING
Before contacting your local Service Force Centre check the following point:
Problem Possible cause / Remedy
”” is displayed in the
temperature display.
An error has occurred in measuring the
temperature. Call your service representative.
(The cooling system will continue to keep
food products cold, but temperature
adjustment will not be possible.)
It is too cold inside the
refrigerator.
Set a warmer temperature.
It is too warm inside the
refrigerator. Set a lower temperature.
Put food products in the right place inside the
refrigerator. See the chapter "Temperature
inside the refrigerator".
Distribute the food products to allow cold air
to circulate around them.
Make sure that the door is completely closed
and that the insulating strip is complete and
clean.
Water comes out on the floor. Place the drain hose at the back of the
cabinet above the drain bowl. See the
chapter "Before using the cabinet the first
time".

18
The compressor operates
continuously.
Set a warmer temperature.
Make sure that the door is completely closed
and that the insulating strip is complete and
clean.
Sound level in cabinet is too
high.
The refrigerating system will always produce
some sounds. A pulsing sound is heard when
coolant is pumped inside the cooling pipes.
A ticking sound from the thermostat can be
heard when the compressor switches on and
off. The sound level varies depending on the
operation of the cabinet.
If you feel the sound level is incorrect:
Make sure the pipes at the back of the
cabinet not touch each other. Carefully bend
them if they do.
If the cushion spacers (between the cabinet
wall and pipes) come loose, put them back in
place again.
Carefully follow the instructions in the chapter
"Installing the cabinet".
The cabinet does not operate
at all. Cooling or interior light
does not operate. No indicator
lamps light.
Power does not reach the cabinet. (Try
connecting another electrical device to the
power outlet.)
The cabinet is not switched on.
Thefusehasblown.
The power plug is not properly connected.
Not enough carbon dioxide in
the water
Incoming water pressure too low.
Drain off a large amount of carbonated water
(about 1 litre)
The carbon dioxide is running out. Replace
the gas cylinder.
Storage temperature too high. Lower the
temperature in the refrigerator.

19
Too much carbon dioxide in
the water
Dilute with ordinary water. (See the section
"The water dispenser functions")
No carbon dioxide. The gas cylinder is empty. Replace the gas
cylinder.
Drain off a large amount of carbonated water
(about 1 litre)
Incoming water pressure too low.
Water flow very low Remove and clean the strainer in the
connecting valve.
Sediment in the water. Replace the filter or
install a pre-filter.
Only gas comes out when
opening
Incoming water pressure too high. Install a
pressure-limiting device.
Capacity temporarily exceeded. Wait for ten
minutes.
The water dispenser lamp
flashes
Leakage at the water connection. Remedy
the leakage and empty the box by pulling out
the red plug.
See the illustration in "Connecting the water
hose".
The indicator lamp flashes. The filter has been totally utilised. Replace the
filter.
The indicator lamp stays on
and shows yellow
80 % of the filter capacity expended. Buy a
new filter.
Delivery is interrupted after a
short time
The maximum time of two minutes is
attained. Continue with delivery.
If after above checksthere is still a fault call your local Service Force Centre.
In-guarantee customers should ensure that the above checks have been made
as the engineer will make a charge if the fault is not a mechanical or electrical
breakdown.
Please note that proof of purchase is required for in-guarantee service calls.

20
Technical specification
Model ERES31800W/ERES31800X
Net capacity Refrigerator l 311
Energy consumption kWh/y 173
Dimension mm
Height 1800
Width 595
Depth 650
Permissible water pressure (to ensure reliable function).
The total flow in the system can vary, depending on local water conditions
and/or water pressure.
Lowest permissible water
pressure. 2,5 bar (250kPa)
Consult your installer if water
pressure is less than 2,5 bar.
Highest permissible water
pressure. 5 bar (500kPa)
If water pressure exceeds 5
bar, than a reduction valve
must be fitted (available from
your specialist shop).
Do not connect the refrigerator in spaces where ambient temperature can
decrease to below freezing.
The refrigerator may only be connected to drinking water supplies.
The refrigerator may only be connected to cold water supplies.
INSTALLATION
Unpacking
Unpack the cabinet and check that it
is in good condition and free of any
transport damage. Notify the dealer
immediately of any damage. Hand the
packaging over for recycling. For more
information, contact your local city
office or the dealer.
Do not allow children to play with the
packaging. The plastic film can cause
suffocation.