Electrolux W565H User manual

Installation manual
Washer extractor
W565H, W565HLE, W575H, W575HLE, W5105H,
W5130H, W5180H, W5240H, W5300H
Type W3...
Original instructions
438 9055-20/EN
2021.05.04

Contents
Contents
1 Safety Precautions ..............................................................................................................................5
1.1 General safety information..........................................................................................................6
1.2 Commercial use only..................................................................................................................6
1.3 Symbols....................................................................................................................................6
2 Warranty terms and exclusions.............................................................................................................7
3 Technical data.....................................................................................................................................8
3.1 Drawing ....................................................................................................................................8
3.1.1 W565H, W565HLE, W575H, W575HLE, W5105H ..............................................................8
3.1.2 W5130H .........................................................................................................................9
3.1.3 W5180H, W5240H, W5300H ..........................................................................................10
3.2 Technical data ......................................................................................................................... 11
3.3 Connections ............................................................................................................................ 11
4 Setup ...............................................................................................................................................12
4.1 Unpacking...............................................................................................................................12
4.1.1 W565H, W565HLE, W575H, W575HLE, W5105H ............................................................12
4.1.2 W5130H, W5180H, W5240H, W5300H ............................................................................14
4.2 Siting ......................................................................................................................................15
4.3 Mechanical installation .............................................................................................................16
5 Marine installation .............................................................................................................................17
6 Water connection ..............................................................................................................................18
7 Connection of external dosing systems ...............................................................................................20
7.1 Connection of the hoses...........................................................................................................20
7.2 Electrical connection of external dosing system..........................................................................21
7.2.1 Machine with connectors.................................................................................................21
7.2.2 Machine without connectors ............................................................................................22
7.2.3 Outputs .........................................................................................................................23
7.2.4 Inputs ............................................................................................................................24
8 Drain connection ...............................................................................................................................25
9 Electrical connection..........................................................................................................................26
9.1 Electrical installation ................................................................................................................26
9.2 Electrical connections ..............................................................................................................27
9.3 Machine connection .................................................................................................................29
9.4 Functions for I/O-cards.............................................................................................................30
9.4.1 External coin meter/Central payment (2A) ........................................................................30
9.4.2 Central payment (2B)......................................................................................................31
9.4.3 Central payment (2C) .....................................................................................................32
9.4.4 Outputs for detergent signals and inputs for pause signals, "empty" signal and price re-
duction (2D) ...................................................................................................................33
9.4.5 Central booking/payment (2F) .........................................................................................34
9.4.6 Machines with I/O module type 3 .....................................................................................35
9.5 Converting heating elements ....................................................................................................36
9.5.1 W565H, W565HLE, W575H, W575HLE and W5105H can be converted from 400-415V
3AC to 230-240V 1AC with reduced power .......................................................................36
9.5.2 Converting heating elements...........................................................................................37
10 Steam connection .............................................................................................................................37
11 At first power up ................................................................................................................................39
11.1 Select language.......................................................................................................................39
11.2 Set time and date.....................................................................................................................39
12 Function check..................................................................................................................................40
13 Disposal information..........................................................................................................................41
13.1 Disposal of appliance at end of life ............................................................................................41
13.2 Disposal of packing..................................................................................................................41
The manufacturer reserves the right to make changes to design and component specifications.

Installation manual 5
1 Safety Precautions
• Servicing shall be carried out only by authorized personnel.
• Only authorized spare parts, accessories and consumables shall be used.
• Only use detergent intended for water-wash of textiles. Never use dry cleaning agents.
• The machine shall be connected with new water hoses. Re-used water hoses must not
be used.
• The machine's door lock must under no circumstances be bypassed.
• If the machine develops a fault, this must be reported to the person in charge as soon
as possible. This is important both for your safety and that of others.
• DO NOT MODIFY THIS APPLIANCE.
• When performing service or replacing parts, the power must be disconnected.
• When the power is disconnected, the operator must see that the machine is discon-
nected (that the plug is removed and remains removed) from any point to which he has
access. If this is not possible, due to the construction or installation of the machine, a
disconnection with a locking system in the isolated position shall be provided.
• In accordance with the wiring rules: mount a multi-pole switch prior to the machine to
facilitate installation and service operations.
• If different rated voltages or different rated frequencies (separated by a /) are stated at
the machine data plate, instructions for adjusting the appliance for operation at the re-
quired rated voltage or rated frequency are stated in the installation manual.
• The openings in the base, shall not be obstructed by a carpet.
• Maximum mass of dry cloth: W565H, W565HLE: 7 kg, W575H, W575HLE: 8 kg,
W5105H: 11 kg, W5130H: 14 kg, W5180H: 20 kg, W5240H: 27 kg, W5300H: 33 kg.
• A-weighted emission sound pressure level at working stations:
– Wash: W565H, W565HLE: <70 dB(A), W575H, W575HLE: <70 dB(A), W5105H: <70
dB(A), W5130H: <70 dB(A), W5180H: <70 dB(A), W5240H: <70 dB(A), W5300H: <70
dB(A).
– Extraction: W565H, W565HLE: <70 dB(A), W575H, W575HLE: <70 dB(A), W5105H:
<70 dB(A), W5130H: <70 dB(A), W5180H: <70 dB(A), W5240H: <70 dB(A), W5300H:
<70 dB(A).
• Maximum inlet water pressure: 800 kPa / 116 psi
• Minimum inlet water pressure: 50 kPa / 8 psi
• Additional requirements for the following countries; AT, BE, BG, HR, CY, CZ, DK, EE,
FI, FR, DE, GR, HU, IS, IE, IT, LV, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI, ES, SE, CH,
TR, UK:
– The appliance can be used in public areas.
– This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved. Children shall not play with the appli-
ance. Cleaning and user maintenance shall not be made by children without
supervision.
• Additional requirements for other countries:
– This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless

6Installation manual
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they
do not play with the appliance.
– This appliance is intended to be used in household and similar applications such as:
(IEC 60335-2-7) staff kitchen areas in shops, offices and other working environments,
farm houses, by clients in hotels, motels and other residential type environments, bed
and breakfast type environments, areas for communal use in blocks of flats or in
launderettes.
1.1 General safety information
The machine is only intended for water-wash use.
Do not hose down the machine with water.
In order to prevent damage to the electronics (and other parts) that may occur as the result of condensation, the ma-
chine should be placed in room temperature for 24 hours before being used for the first time.
1.2 Commercial use only
The machine/machines covered by this manual is/are made for commercial and industrial use only.
1.3 Symbols
Caution
Caution, high voltage
Read the instructions before using the machine

Installation manual 7
2 Warranty terms and exclusions
If the purchase of this product includes warranty coverage, warranty is provided in line with local regulations and sub-
ject to the product being installed and used for the purposes as designed, and as described within the appropriate
equipment documentation.
Warranty will be applicable where the customer has used only genuine spare parts and has performed maintenance
in accordance with Electrolux Professional user and maintenance documentation made available in paper or elec-
tronic format.
Electrolux Professional strongly recommends using Electrolux Professional approved cleaning, rinse and descaling
agents to obtain optimal results and maintain product efficiency over time.
The Electrolux Professional warranty does not cover:
• service trips cost to deliver and pick up the product;
• installation;
• training on how to use/operate;
• replacement (and/or supply) of wear and tear parts unless resulting from defects in materials or workmanship re-
ported within one (1) week from the failure;
• correction of external wiring;
• correction of unauthorized repairs as well as any damages, failures and inefficiencies caused by and/or resulting
from;
– insufficient and/or abnormal capacity of the electrical systems (current/voltage/frequency, including spikes and/or
outages);
– inadequate or interrupted water supply, steam, air, gas (including impurities and/or other that does not comply with
the technical requirements for each machine);
– plumbing parts, components or consumable cleaning products that are not approved by the manufacturer;
– customer’s negligence, misuse, abuse and/or non-compliance with the use and care instructions detailed within
the appropriate equipment documentation;
– improper or poor: installation, repair, maintenance (including tampering, modifications and repairs carried out by
third parties not authorized third parties) and modification of safety systems;
– Use of non-original components (e.g.: consumables, wear and tear, or spare parts);
– environment conditions provoking thermal (e.g. overheating/freezing) or chemical (e.g. corrosion/oxidation)
stress;
– foreign objects placed in- or connected to- the product;
– accidents or force majeure;
– transportation and handling, including scratches, dents, chips, and/or other damage to the finish of the product,
unless such damage results from defects in materials or workmanship and is reported within one (1) week of deliv-
ery unless otherwise agreed;
• product with original serial numbers that have been removed, altered or cannot be readily determined;
• replacement of light bulbs, filters or any consumable parts;
• any accessories and software not approved or specified by Electrolux Professional.
Warranty does not include scheduled maintenance activities (including the parts required for it) or the supply of
cleaning agents unless specifically covered within any local agreement, subject to local terms and conditions.
Check on Electrolux Professional website the list of authorized customer care.

8Installation manual
3 Technical data
3.1 Drawing
3.1.1 W565H, W565HLE, W575H, W575HLE, W5105H
A
I
H
C
3
L
K
J
1
9
G
2
5
7
10
F
MO
N
4
8
6
B
E
D2
D1
fig.8027
1 Operating panel
2 Door opening, W565H, W565HLE, W575H, W575HLE: ⌀310 mm, W5105H: ⌀365 mm
3 Detergent container
4 Cold water
5 Hot water
6 Re-used water
7 Drain valve
8 Liquid detergent supply
9 Electrical connection
10 Steam connection
mm A B C D1 D2 E F G
W565H 720 721 1132 352 406 1130 831 80
W565HLE 720 721 1132 352 406 1130 831 80
W575H 720 721 1132 352 406 1130 831 80
W575HLE 720 721 1132 352 406 1130 831 80
W5105H 830 767 1212 355 412 1223 916 80
mm H I J K L M N O
W565H 1030 224 124 1010 910 278 98 239
W565HLE 1030 224 124 1010 910 278 98 239
W575H 1030 224 124 1010 910 278 98 239
W575HLE 1030 224 124 1010 910 278 98 239
W5105H 1115 217 124 1095 995 278 102 294

Installation manual 9
3.1.2 W5130H
A
C
3
1
2
H
L
K
G
I
J
6
4
9
10
F
MO
N
7
5
B
E
D2
D1
8
fig.8028
1 Operating panel
2 Door opening, W5130H: ⌀395 mm
3 Detergent container
4 Cold water
5 Hot water
6 Re-used water
7 Drain valve
8 Liquid detergent supply
9 Electrical connection
10 Steam connection
mm A B C D1 D2 E F G
W5130H 910 821 1340 430 491 1331 1044 160
mm H I J K L M N O
W5130H 1243 377 297 1223 1123 282 100 302

10 Installation manual
3.1.3 W5180H, W5240H, W5300H
3
A
C
1
2
I
J
G
6
4
N
H
L
K
9
10
F
7
MO
8
5
D2
B
E
D1
fig.8029
1 Operating panel
2 Door opening, W5180H, W5240H, W5300H: ⌀435 mm
3 Detergent container
4 Cold water
5 Hot water
6 Re-used water
7 Drain valve
8 Liquid detergent supply
9 Electrical connection
10 Steam connection
mm A B C D1 D2 E F G
W5180H 970 947 1426 461 526 1501 1130 150
W5240H 1020 990 1462 492 557 1545 1165 135
W5300H 1020 1134 1462 492 556 1689 1165 135
mm H I J K L M N O
W5180H 1329 397 317 1289 1204 348 100 335
W5240H 1364 401 301 1324 1244 333 100 359
W5300H 1364 402 302 1324 1244 333 100 359

Installation manual 11
3.2 Technical data
W565H/
W565HLE
W575H/
W575HLE
W5105H W5130H W5180H W5240H W5300H
Weight, net kg 145 158 202 263 354 425 560
Drum volume litres 65 75 105 130 180 240 300
Drum diameter mm 520 520 595 650 725 795 795
Drum speed during wash rpm 49 49 49 49 44 42 42
Drum speed during extraction rpm 1245 1245 1165 1115 1055 1005 950
G-factor, max. 450 450 450 450 450 450 400
Heating: Electricity kW 2.0 2.0 5.2 13 18 23 23
kW 3.0 3.0 7.5
kW 5.2 5.2 10
kW 5.4 5.4
kW 7.5 7.5
Heating: Steam x x x x x x x
Heating: Hot water x x x x x x x
Frequency of the dynamic
force
Hz 20.8 20.8 19.4 18.6 17.6 16.8 15.8
Floor load at max extraction kN 1.8 ± 0.5 1.9 ± 0.5 2.5 ± 0.5 3.1± 0.5 4.2 ± 1.0 5.2 ± 1.0 6.2 ± 1.3
Sound power/pressure level at
extraction*
dB(A) 73/58 73/59 76/62 78/62 84/68 83/68 82/66
Sound power/pressure level at
wash*
dB(A) 57/43 61/47 61/46 63/48 66/50 64/48 66/50
* Sound power levels measured according to ISO 60704.
3.3 Connections
W565H/
W565HLE
W575H/
W575HLE
W5105H W5130H W5180H W5240H W5300H
Water valves DN
BSP
20
3/4”
20
3/4”
20
3/4”
20
3/4”
20
3/4”
20
3/4”
20
3/4”
Recommended water
pressure
kPa 200–600 200–600 200–600 200–600 200–600 200–600 200–600
Continuous operating
pressure
kPa 50–800 50–800 50–800 50–800 50–800 50–800 50–800
Capacity at 300 kPa l/min 20 20 20 20 30 60 60
Drain valve
⌀outer
mm 50/75 50/75 50/75 75 75 75 75
Draining capacity l/min 170 170 170 170 170 170 170
Steam valve connection DN
BSP
15
1/2”
15
1/2”
15
1/2”
15
1/2”
15
1/2”
15
1/2”
15
1/2”
Recommended steam
pressure
kPa 300–600 300–600 300–600 300–600 300–600 300–600 300–600
Functioning limits for steam
valve
kPa 50–800 50–800 50–800 50–800 50–800 50–800 50–800

12 Installation manual
4 Setup
4.1 Unpacking
4.1.1 W565H, W565HLE, W575H, W575HLE, W5105H
The machine is delivered complete with expander bolts, supporting feet etc.
The machine is delivered bolted onto the transport pallet and packed in a crate or box.
Remove packing from the machine.
Remove the front and rear panel.
Remove the four transport supports. Save the transport supports if the machine needs to be moved in the future.
Note!
Once the transport supports have been removed, handle the machine carefully to avoid damage to the sus-
pension components.
fig.X00841A
Remove the bolts between the machine and pallet. There is one to the right in the front of the machine and another
diagonally opposed to it, at the back of the machine.
fig.W00841B

Installation manual 13
Remove the machine from the pallet.
Note!
When moving the machine, handle it with care. Make sure that the machine does not come down on the floor
with either of the rear corners first. The side panel of the machine can be damaged.
Place the machine on its final position.
Mount the supporting feet.
fig.W00859
Remount the panels.

14 Installation manual
4.1.2 W5130H, W5180H, W5240H, W5300H
Note!
Two persons are recommended for the unpacking.
The machine is delivered complete with expander bolts, supporting feet etc.
The machine is delivered bolted onto the transport pallet and packed in a crate or box.
Remove packing from the machine.
Remove the side panels.
Remove the front and rear panel.
Remove the transport securities. Save the transport securities if the machine needs to be moved in the future.
Note!
Once the transport securities have been removed, handle the machine carefully to avoid damage to the sus-
pension components.
fig.W00843A
Remove the bolts between the machine and pallet. There is one to the right in the front of the machine and another
diagonally opposed to it, at the back of the machine.
fig.W00843B

Installation manual 15
Remove the machine from the pallet.
Note!
When moving the machine, handle it with care.
Place the machine on its final position.
Mount the supporting feet.
W5300H: Note the position of the two front feet.
W5130H, W5180H, W5240H
W5300H
Remount the panels.
4.2 Siting
Install the machine close to a floor drain or open drain.
The machine should be positioned so that there is plenty of room for working, both for the user and service personnel.
The figure shows minimum distance to a wall and/or other machines.
A A
B
fig.X00959
A 50 mm / 1 15/16 inch
B 500 mm / 20 inch

16 Installation manual
4.3 Mechanical installation
If the machine is not to be mounted on a base the machine must be fastened to the floor with the enclosed expansion
bolts.
The table shows the correct drilling points.
W565H-W5105H: Mark and drill two holes (⌀8 mm) about 40 mm deep in the positions shown.
W5130H-W5300H: Mark and drill two holes (⌀10 mm) about 50 mm deep in the positions shown.
C A
D
G
FE
B
H
FRONT = drilling points
= position of feet
1
1
fig.5989A
mm A B C D E F G H
W565H/
W565HLE
495 460 110 125 375 170 40 100
W575H/
W575HLE
495 460 110 125 375 170 40 100
W5105H 575 465 130 140 455 185 35 95
W5130H 635 490 135 175 515 195 65 125
W5180H 715 545 125 205 595 185 65 125
W5240H 790 615 115 180 670 175 65 125
W5300H 790 755 60 140 670 175 65 85
Place the machine over the two drilled holes. The holes are at the front of the machine.
Level the machine with the feet of the machine. Screw in the feet as much as possible before starting to level the ma-
chine. This will make the machine stand steadier.
Insert the expansion bolts (1) into the holes drilled in the floor. Fit the washers and nuts and tighten well.
It is of the upmost importance that the machine is placed in level, from side to side as well as front to rear. If the
machine is not properly levelled, it may result in out-of-balance without a real out of balance in the drum.

Installation manual 17
5 Marine installation
The maximum inclination allowed in any direction is 4°.
To ensure steadiness of the machine; the machine must be fastened to the floor.

18 Installation manual
6 Water connection
All water intake connections to the machine should be fitted with manual shut-off valves and filters, to facilitate instal-
lation and servicing.
Water pipes and hoses should be flushed clean before installation.
The machine shall be connected with new water hoses. Re-used water hoses must not be used.
Hoses are to be of an approved type and grade and comply with IEC 61770.
After installation hoses must hang in gentle arcs.
All connectors present on the machine must be connected. The table shows the possible connection options, which
will depend on the water types to be connected to the machine. Information is also available on the panel above the
connections.
Water type Water connection
1
W565H, W565HLE, W575H, W575HLE
• Cold
W565H, W565HLE, W575H, W575HLE
1. Cold
1
2
W565H, W565HLE, W575H, W575HLE,
W5105H, W5130H
• Cold and hot
W565H, W565HLE, W575H, W575HLE,
W5105H, W5130H
1. Cold
2. Hot
1
2
3
W5180H, W5240H, W5300H
• Cold and hot
W5180H, W5240H, W5300H
1. Cold
2. Hot
3. Cold (for detergent container) / Hot
There is also an extra water valve which can be used for hard water if soft water is connected to 1.
This valve can also be used for water re-use from tank.
If pump is used, it is only a water connection without valve.

Installation manual 19
For WRAS-approved machines: Remove the three plastic covers (A).
A
fig.7811B
Water pressure:
Miniumum: 50 kPa (0.5 kp/cm2)
Maximum: 800 kPa (8 kp/cm2)
Recommended: 200–600 kPa (2–6 kp/cm2)
Note!
If the water pressure is below the minimum value, the wash result can not be guaranteed for certain program.
For WRAS-approved machines; always check connection requirements on WRAS website.
Plumbing
This machine is approved for all UK applications as suitable for category 5.
The product is listed in the WRAS regulations advisory scheme directory and is suitable for direct connection to
mains drinking water. No special plumbing arrangements e.g. break tanks are required.
Water Council approved double check valves should be fitted in between the stopcocks and the water inlet hoses.

20 Installation manual
7 Connection of external dosing systems
7.1 Connection of the hoses
The machine is prepared for connection of external dosing systems or water re-use systems etc.
The connections are closed at delivery. Open any of the connections that shall be used by drilling a hole where the
hoses shall be connected.
Note!
Make sure there is no burrs left after drilling. When removing burrs make sure burrs does not fall into the si-
phon breaker.
A = ⌀17 mm (used for external dosing systems or systems for re-use of water).
B = ⌀6 mm (used for external dosing systems only).
C = Only used for external liquid manifold. (Separate instructions enclosed when ordering).
A
B
C
Always connect hoses on connections A with a hose clamp.
For connections B; if the hoses are made of a soft material such as silicone or similar, use a cable tie to fasten the
hose on the connection. If the hoses are made of a hard material, it is not recommended to make the connection
tighter by using a cable tie.
Note!
Equipment for external dosing must only be connected to work on pump pressure and not on network
pressure.