Electrolux washing machine User manual

SERVICE MANUAL
WASHING
ELECTROLUX HOME PRODUCTS
ITALY S.p.A.
Spares Operations Italy
Corso Lino Zanussi, 30
Publication no.
I - 33080 PORCIA /PN 599 37 22-15
Fax [phone]
Edition: 2005-07-21
EN
Washing machines with
EWM 1000 PLUS
electronic control system
and
“Delta 3” display board
With sensor
Production ZP (Porcia-Italy)

SOI/DT 2005-07 dmm 2/59 599 37 22 15

SOI/DT 2005-07 dmm 3/59 599 37 22 15
TABLE OF CONTENTS
1PURPOSE OF THIS MANUAL ................................................................................................................... 5
2PRECAUTIONS .......................................................................................................................................... 5
3GENERAL CHARACTERISTICS................................................................................................................ 5
4CONTROL PANEL...................................................................................................................................... 6
4.1 “Fabrics” Button.................................................................................................................................... 6
4.2 “Temperature” Button........................................................................................................................... 7
4.3 “Spin” Button ........................................................................................................................................ 7
4.4 Description of the “options” .................................................................................................................. 8
4.5 Description of options......................................................................................................................... 10
4.5.1 Night cycle ................................................................................................................................... 10
4.5.2 Rinse-hold.................................................................................................................................... 10
4.5.3 Pre-wash...................................................................................................................................... 10
4.5.4 Soak............................................................................................................................................. 10
4.5.5 Stains........................................................................................................................................... 10
4.5.6 Short (daily) ................................................................................................................................. 10
4.5.7 Very short .................................................................................................................................... 10
4.5.8 Intensive ...................................................................................................................................... 10
4.5.9 Economy / Energy label............................................................................................................... 10
4.5.10 Sensitive .................................................................................................................................... 11
4.5.11 Bleach........................................................................................................................................ 11
4.5.12 “Half load” button ....................................................................................................................... 11
4.5.13 Easy-Iron ................................................................................................................................... 11
4.5.14 Reduced spin speed.................................................................................................................. 11
4.5.15 No spin....................................................................................................................................... 11
4.5.16 Modifying the spin speed........................................................................................................... 11
4.5.17 Time reduction (Quick) .............................................................................................................. 11
4.5.18 Temperature adjustment ........................................................................................................... 12
4.5.19 Extra rinse.................................................................................................................................. 12
4.6 Delayed-start time .............................................................................................................................. 12
4.7 Start/Pause......................................................................................................................................... 12
4.8 “START/RESET” Button..................................................................................................................... 13
4.9 Display (some models)....................................................................................................................... 14
4.10 Phase / warning LEDs...................................................................................................................... 14
4.11 ON/OFF Button ................................................................................................................................ 15
4.12 Exclusion of the buzzer at the end of the programme ..................................................................... 15
4.13 Variation of the rinses according to the options ............................................................................... 15
5WASHING PROGRAMMES ..................................................................................................................... 16
5.1 Possible programmes......................................................................................................................... 16
6WASHING PROGRAMMES ..................................................................................................................... 17
6.1 Basic programmes for Cotton / Linen: cold – 30-40-60-90 (without options) for G17/18/19/20/22 ... 17
6.2 Cotton / Linen Cycles: 90 Eco, 60 - 40/50 “energy label” (without options) for G17.......................... 18
6.3 Cotton / Linen Cycles: 90 Eco, 60 - 40/50 “energy label” (without options) for G18.......................... 19
6.4 Cotton / Linen Cycles: 90 Eco, 60 - 40/50 “energy label” (without options) for G19.......................... 20
6.5 Cotton / Linen Cycles: 90 Eco, 60 - 40/50 “energy label” (without options) for G20-5Kg-6KG.......... 21
6.6 Cotton / Linen Cycles: 90 Eco, 60 - 40/50 “energy label” (without options) for G22-6KG-7Kg.......... 22
6.7 Basic programmes for synthetic fabrics: cold – 30°- 40° – 50° - 60°(without options) ..................... 23
6.8 Basic programmes for delicates: cold – 30°- 40°(without options) .................................................. 24
6.9 Wool programme: cold - 30°- 40°.................................................................................................... 25
6.10 Hand-wash programmes: cold - 30°- 40°........................................................................................ 26
6.11 JEANS Wash programmes: 40°- 60°.............................................................................................. 27
6.12 SHOES Wash programmes: 40°- 60°............................................................................................. 27
6.13 DUVET Wash programmes.............................................................................................................. 28
6.14 SILK Wash programmes .................................................................................................................. 29
6.15 Drum movements - low speeds and spin ......................................................................................... 30
6.15.1 Delicate movement D55 ............................................................................................................ 30
6.15.2 Normal movement N55.............................................................................................................. 30
6.15.3 Vigorous movement E55 ...........................................................................................................30
6.15.4 Delicate movement PWL_1 (wool) ............................................................................................ 30
6.15.5 Delicate movement PWL_4 (hand wash) .................................................................................. 30
6.15.6 Spin Pre-wash (cotton/linen, synthetics) - C0 intermediate (synthetics) ................................... 30
6.15.7 Wash spin (cotton/linen) C1 ...................................................................................................... 31

SOI/DT 2005-07 dmm 4/59 599 37 22 15
6.15.8 Intermediate spin (cotton/linen) C2 ........................................................................................... 31
6.15.9 Final spin (cotton/linen) COT_CF.............................................................................................. 31
6.15.10 Intermediate and final spin (synthetics) SYN_CF.................................................................... 31
6.15.11 Final spin (delicate fabrics) DEL_ CF...................................................................................... 32
6.15.12 Final spin (wool and hand wash) WOOL_CF .......................................................................... 32
6.15.13 Impulse spin for easy-iron programmes .................................................................................. 32
6.15.14 Intermediate spin for super-rinse options (cotton/linen) CSR ................................................. 32
6.15.15 Spin IMP_BLANKET_III_650................................................................................................... 32
6.16 Control of water level in tub.............................................................................................................. 33
6.16.1 Time water fill............................................................................................................................. 34
7TECHNICAL CHARACTERISTICS .......................................................................................................... 35
7.1 EWM1000 Plus Electronic control...................................................................................................... 35
7.1.1 Functions of the circuit board ...................................................................................................... 35
7.1.2 Memory in the control system...................................................................................................... 35
7.2 Power supply and programme selection............................................................................................36
7.3 Door interlock ..................................................................................................................................... 36
7.3.1 Voltmetric interlock with PTC....................................................................................................... 36
7.3.2 Instantaneous door interlock ....................................................................................................... 37
7.4 Pressure switch .................................................................................................................................. 38
7.4.1 Pressure switch settings.............................................................................................................. 38
7.5 Detergent dispenser........................................................................................................................... 38
7.6 Water fill system ................................................................................................................................. 39
7.6.1 Calculation of flow rate ................................................................................................................ 39
7.7 Drain pump......................................................................................................................................... 40
7.8 Anti-flooding device............................................................................................................................ 40
7.9 Aqua Control (certain models only).................................................................................................... 41
7.10 Heating ............................................................................................................................................. 42
7.10.1 Heating element ........................................................................................................................ 42
7.10.2 Temperature sensor .................................................................................................................. 42
7.11 Motor ................................................................................................................................................ 43
7.12 Power supply to motor ..................................................................................................................... 43
7.13 Anti-foam control system.................................................................................................................. 43
7.14 “FUCS” (Fast Unbalance Control System)....................................................................................... 44
8DEMO Mode ............................................................................................................................................. 46
8.1 Setting Demo mode............................................................................................................................ 46
8.2 Exiting demo mode............................................................................................................................. 46
9DIAGNOSTICS SYSTEM ......................................................................................................................... 47
9.1 Access to diagnostics system ............................................................................................................ 47
9.2 Phases of the diagnostics test ........................................................................................................... 47
9.2.1 Display board diagnostics............................................................................................................ 49
9.3 Exiting the diagnostics system ........................................................................................................... 49
10 ALARMS ................................................................................................................................................. 50
10.1 User alarm display............................................................................................................................ 50
10.1.1 Alarms displayed during normal operation ................................................................................ 50
10.2 Reading the alarm codes ................................................................................................................. 51
10.2.1 Displaying the alarm .................................................................................................................. 51
10.2.2 Examples of alarm displays....................................................................................................... 51
10.2.3 Operation of alarms during diagnostics..................................................................................... 52
10.3 Notes about some alarms ................................................................................................................ 52
Rapid reading of alarm codes................................................................................................................ 52
ªCancelling the last alarm...................................................................................................................... 52
10.4 Table of alarm codes........................................................................................................................ 53
11 Operating time counter ........................................................................................................................... 55
11.1.1 Reading the operating time ....................................................................................................... 55
11.1.2 Displaying the operating time .................................................................................................... 55
12 BASIC CIRCUIT DIAGRAM.................................................................................................................... 56
12.1 Without Aquacontrol......................................................................................................................... 56
12.2 Key to circuit diagram....................................................................................................................... 57
12.3 With Aquacontrol.............................................................................................................................. 58
12.3.1 Key to circuit diagram ................................................................................................................ 59

SOI/DT 2005-07 dmm 5/59 599 37 22 15
1 PURPOSE OF THIS MANUAL
The purpose of this manual is to provide service engineers who are already familiar with the repair
procedures for traditional washing machines with information regarding appliances fitted with the EWM 1000
plus electronic control system and produced in Porcia (Italy).
The EWM1000 plus electronic control system consists of a main electronic board and one control/display
board, “Delta 3” version.
The following are described:
•General characteristics
•Control panel and washing programmes
•Technical characteristics
•Guide to the diagnostics
For detailed information concerning hydraulic circuit, structural characteristics of the appliances and
accessibility, please refer to Service Manual for Series P6000/Nexus washing machines and washer-dryers
(publication no. 599 35 23-17).
2 PRECAUTIONS
Electrical appliances must be serviced only by qualified Service Engineers.
Always remove the plug from the power socket before touching internal
components.
3 GENERAL CHARACTERISTICS
Programme selection Buttons (Input)
Serial port DAAS-EAP communications protocol up to 38400 baud
Power supply 220/240V
50/60 Hz (configurable)
Type of washing Traditional
with “eco-ball” sphere
Rinsing system Traditional
Motor Commutator motor with tachimetric generator
Spin speed 850 ÷1600 rpm
Anti-unbalancing
system FUCS
Water fill 1 solenoid valve with 1 inlet – 2 or 3 outlets
Detergent drawer 3 compartments: prewash/stains, wash, conditioners
4 compartments: prewash/stains, wash, conditioners, bleach
Control of water level in
the tub
two-level pressure switch: 1st level and anti-boiling safety level (the other
levels refer to fixed-time fills)
possibility of three-level pressure switch: 1st level, anti-boiling and anti-
flooding safety levels
Door safety device Traditional (with PTC)
Instantaneous
Power of heating
element Up to 1950W
Temperature control NTC sensor
Sensors Aqua Control

SOI/DT 2005-07 dmm 6/59 599 37 22 15
4 CONTROL PANEL
The configuration of the control panel depends on the following:
Type of control/display board
Design of the control panel ( max.9 buttons, LEDs)
Different configuration of the buttons
1. “FABRICS” Button
2. “TEMPERATURE” Button
3. “SPIN” Button
4. “OPTIONS” Button
5. “OPTIONS” Button
6. “OPTIONS” Button
7. “START/PAUSE” Button
8. “SKIP/RESET” Button
9. “DELAYED START” Button
10. Programme phase/warning LEDs
11. Display
12. ON/OFF Button
13. Pilot lamp
4.1 “Fabrics” Button
ªThe programme is chosen on the basis of the type of washing by pushing
this button in sequence. The corresponding LED lights.
ªThe machine proposes the standard programme for the type of fabric
selected: the display shows a temperature and the maximum spin speed for
the selected programme (and the normal soil level).
ªThese values can be modified using the relative buttons. The display
indicates the duration of the selected programme, calculated on the basis of
the maximum load for each type of fabric; the START/ PAUSE button pilot
lamp begins to flash.
ªThe type of fabric can be modified during the washing phase: in this case the
cycle will restart from the beginning, with the water level (if the water level is
not sufficient the necessary level for the new cycle is reset) and the
detergent quantity previously filled.
The table below shows the options that the user can select for each model:
LED Configuration type A Configuration type B Configuration type C
L1 Cotton Cotton Cotton
L2 Synthetics Synthetics Synthetics
L3 Delicates Delicates Delicates
L4 Wool Hand wash Wool
L5 Hand wash Mini (30º/30min) ------

SOI/DT 2005-07 dmm 7/59 599 37 22 15
4.2 “Temperature” Button
ªPushing this button in sequence the temperature is increased or decreased (if
a temperature different from that set by the appliance is desired); the relative
LED lights.
ªThe maximum temperature is 90°C for Cotton, 60°C for Synthetics, 40°C for
Delicates, Wool and Hand wash.
ªThe button is active only after selecting the type of fabric.
ªThe temperature can be modified before the heating phase (by setting the
appliance in PAUSE mode).
The table below shows the options that the user can select for each model:
LED Configuration type A Configuration type B Configuration type C
L6 90º C 90º C 90º C
L7 60º C 60º C 60º C
L8 40º C 50º C 50º C
L9 30º C 30º C 40º C
L10 Cold wash Cold wash 30º C
4.3 “Spin” Button
ªPushing this button the speeds of all spin cycles are reduced.
ªThe button is active only after selecting the type of fabric; the spin speed can
be modified up to the end of the rinse cycles.
ªThe last position can be used for NO SPIN, RINSE HOLD.
ªThe exclusion of the SPIN adds three rinses in the COTTON cycle and one
rinse in the SYNTHETICS cycle.
The table below shows the options that the user can select for each model:
Button LED Function 1 Function 2 Function 3 Function 4 Function 5 Function 6
L11 Max. Spin Max. Spin 900 rpm Max. Spin Max. Spin 900 rpm
L12 1200 rpm 900 rpm 700 rpm 1200 rpm 900 rpm 700 rpm
L13 900 rpm 700 rpm 600 rpm 900 rpm 700 rpm 600 rpm
L14 700 rpm 500 rpm 500 rpm 700 rpm 500 rpm 500 rpm
3
L15 Rinse hold Rinse hold Rinse hold No spin No spin No spin

SOI/DT 2005-07 dmm 8/59 599 37 22 15
4.4 Description of the options
The number and type of buttons vary according to the configuration of the model.
Possible options according the selected programme
OPZIONI
Rinse-hold Night cycle Pre-wash Soak Stains Intensive Daily Short Economy Sensitive Extra rinse Bleach Half-load Easy iron Reduced spin speed No spin
90°C X X X X X X X X X X X X X X X X
60°C X X X X X X X X X X X X X X X X
50°C X X X X X X X X X X X X X X X X
40°C X X X X X X X X X X X X X X X X
30°C X X X X X X X X X X X X X
COTTON
Cold X X X X X X X X X X X X X
60°C X X X X X X X X X X X X X X
50°C X X X X X X X X X X X X X X
40°C X X X X X X X X X X X X X
30°C X X X X X X X X X X X X
SYNTHETICS
Cold X X X X X X X X X X X X
MINI PROGRAMME 30°C X X X X
40°C X X X X X X X X
30°C X X X X X X X X
DELICATES
Cold X X X X X X X X
SILK 30°C X X X X X
40°C X X X X
30°C X X X X
WOOL - HAND
WASH Cold X X X X
40°C X X X X X X X X
30°C X X X X X X X X
MIX
Cold X X X X X X X X
40°C X X X X X X X
30°C X X X X X X X
SHOES
Cold X X X X X X X
60°C X X X X X X X
50°C X X X X X X X
40°C X X X X X X X
30°C X X X X X X X
JEANS
Cold X X X X X X X
60°C X X X X X X
50°C X X X X X X
40°C X X X X X X
30°C X X X X X X
SHORT 60 A
Cold X X X X X X
SOAK
RINSES X X X X X X X X
CONDITIONER X X X X X
DRAIN
SPIN X
Compatibility with PROGRAMMES
DELICATE SPIN X

SOI/DT 2005-07 dmm 9/59 599 37 22 15
Compatibility with options
OPTIONS
Rinse-hold Night cycle Pre-wash Soak Stains Intensive Daily Short Economy Sensitive Extra rinse Bleach Half-load Easy iron Reduced spin speed No spin
RINSE HOLD X X X X X X X X X X X X X X X
NIGHT CYCLE X X X X X X X X X X X X
PREWASH X X X X X X X X X X X X
SOAK X X X X X X X X X X X X
STAINS X X X X X X X X X X X X
INTENSIVE X X X X X X X X X X X X
DAILY X X X X X X X X X X X X
SHORT X X X X X X X X X X X X
ECONOMY X X X X X X X X X X X X
SENSITIVE X X X X X X X X X X X X X X
EXTRA RINSE X X X X X X X X X X X X X X X
BLEACH X X X X X X X X X X X X
HALF-LOAD X X X X X X X X X X X X X X X
EASY-IRON X X X X X X X X X X X X X X
REDUCED SPIN SPEED X X X X X X X X X X X X X
Compatibility with the OPTIONS
NO SPIN X X X X X X X X X X X X X
PRESELECTION X X X X X X X X X X X X X X X X
PREWASH X X X X X X X X X X X X X X
WASH X X X X X X X X X X X X X X
RINSES X XX
Phases in
which option
can be selected
SPIN XX
The table below shows other limitations in the compatibility of the options according to the type of drawer
type and number of solenoid valves.
4C-3V 4C-2V 3C-2V
PREWASH / SOAK ►►►
BLEACH ♦►◊
STAINS ►►►
4C= 4-compartment drawer ◊= Option not available
3C= 3-compartment drawer ♦= Option available
3V= 3 solenoid valves ►=Only one of these options can be selected
2V= 2 solenoid valves

SOI/DT 2005-07 dmm 10/59 599 37 22 15
4.5 Description of options
4.5.1 Night cycle
ªEliminates all spin phases and adds three rinses in COTTON cycles and two rinses in SYNTHETICS
cycles.
ªStops the appliance with water in the tub before the final rinse.
ªSwitches off the buzzer (if configured)
ªTo drain the water, select a drain or spin cycle.
4.5.2 Rinse-hold
ªStops the appliance with water in the tub before the final spin cycle.
ªSwitches off the buzzer (if configured)
ªTo drain the water, select a drain or spin cycle.
4.5.3 Pre-wash
ªAdds a pre-wash phase at the start of the cycle with water heating to 30°C (or cold, if selected).
ªIn COTTON and SYNTHETICS cycles, performs a short spin (impulse) before passing to the washing
phase.
ªThis option cannot be selected for the WOOL and HAND-WASH cycles.
4.5.4 Soak
ªAdds a pre-wash phase (30’ duration with wool cycle movement) at the start of the cycle with water
heating to 30°C (or cold, if selected).
ªIn COTTON and SYNTHETICS cycles, performs a short spin (impulse) before passing to the washing
phase.
ªTogether with the delayed start option it is possible to select a soak time from 30 minutes up to 10 hours.
ªThis option cannot be selected for the WOOL and HAND-WASH cycles.
4.5.5 Stains
ªAdds a 5-minute motor movement phase after heating to 40°C.
ªDucts water to the pre-wash/stains compartment in order to introduce the special stain-removal product.
ªThis option cannot be selected for DELICATES, WOOL and HAND-WASH cycles.
ªThe movements during the washing phase change from vigorous to normal.
4.5.6 Short (daily)
ªModifies the structure of the washes in the COTTON and SYNTHETICS programmes in order to obtain
good washing performance with a short cycle (optimization for small loads).
4.5.7 Very short
ªModifies the structure of the COTTON, SYNTHETICS and DELICATES programmes in order to obtain
very short washing times (optimization for small or lightly-soiled loads).
ªReduces the number of rinse cycles (one less).
ªIncreases the water level in the remaining two rinse cycles.
4.5.8 Intensive
ªModifies the washing phase by adding 10 minutes of normal movement in the cotton programme.
4.5.9 Economy / Energy label
ªModifies the structure of the COTTON 40°/50°/60°/90° - SYNTHETIC FABRICS 50°/60° programmes in
order to reduce energy consumption.
ªReduces the washing temperature in 90°/60°/50° programmes, while for the 40° programme the
temperature is increased by 4°.
ªIncreases the duration of the wash phase.

SOI/DT 2005-07 dmm 11/59 599 37 22 15
4.5.10 Sensitive
ªAdds one rinse in the COTTON – SYNTHETIC FABRICS cycles.
ªDuring the cotton cycles the movements pass from vigorous to normal.
ªEliminates the intermediate spins except from the last two which are ar reduced speed.
4.5.11 Bleach
ªDucts water through the bleach compartment at the beginning of the first rinse in COTTON cycles.
ªPre-wash is possible only if there are three solenoids.
ªIn models with two solenoids, the bleach option is not compatible with the pre-wash option.
4.5.12 “Half load” button
ªEliminates one rinse in the COTTONS programmes.
4.5.13 Easy-Iron
•In COTTON programmes:
ªAdds three rinses.
ªEliminates the intermediate spins.
ªPerforms an impulse spin phase.
ªAdds an “untangling” phase after the spin cycle.
•In SYNTHETICS cycles:
ªReduces the temperature in 50/60° cycles to 40°C.
ªIncreases the washing time.
ªProlongs the cooling phase at the end of the washing phase.
ªAdds one rinse without spin cycle.
ªAdds an “untangling” phase after the impulse spin cycle.
4.5.14 Reduced spin speed
ªReduces the speed of all spins as shown in the table.
Maximum spin speed (rpm) 600 700 800 900 1000 1100 1200 1300 1400 1500 1600
Reduction for COTTON (rpm) 450 450 450 450 500 550 600 650 700 750 800
Reduction for ALL OTHER CYCLES (rpm) 450 450 450 450 450 450 450 450 450 450 450
4.5.15 No spin
ªEliminates all the spin phases.
ªThree rinses are added in the COTTON cycle and one in the SYNTHETICS cycle.
4.5.16 Modifying the spin speed
ªReduces the speed of all spin cycles.
ªThe last position can be used for NO SPIN, RINSE-HOLD.
ªIf the NO-SPIN option is selected, three rinses are added in the COTTON cycle, and one in the
SYNTHETICS cycle.
4.5.17 Time reduction (Quick)
ªModifies the structure of the COTTON - SYNTHETICS– DELICATES programmes to obtain very short
washing times (optimization for small or lightly-soiled loads).
ªReduces the number of rinses (one rinse less).
ªIncreases the water level of the other two rinses.
ªCorresponds to the SHORT- VERY SHORT cycles according to the configuration of the appliance.

SOI/DT 2005-07 dmm 12/59 599 37 22 15
4.5.18 Temperature adjustment
ªUsed to select the washing temperature compatibly with the limit temperature for the cycle.
ªCan be used during the cycle selection phase: the temperature can be modified only if the heating
phase has not started (in pause mode)
4.5.19 Extra rinse
ªAdds two rinses in the COTTON, SYNTHETICS and DELICATES cycles.
Eliminates the intermediate spin cycles, with the exception of the final rinse, which is reduced to 450 rpm.
To select the extra rinse option, after selecting a
COTTON or SYNTHETICS or DELICATES cycle, push
simultaneously buttons 4and 5for at least 2 seconds,
until the corresponding phase LED lights.
This option remains always active in the following cycles;
to disactivate it, repeat the same procedure: press
buttons PREWASH (no. 1) and no. 3 simultaneously for
at least 2 seconds, until the extra rinse LED switches off.
4.6 Delayed-start time
•Models with digit:
ªDuring the programme selection phase, it is possible to select a delayed
start from 30 minutes up to 24 hours ()30’)60’)90’)2h)3h...)
24h)0h).
ªDuring the countdown, the time decreases every hour up to 2h, then by
30 minutes.
ªTo start the cycle immediately, after the countdown has commenced:
press the Start/Pause button, cancel the delay time by pressing the
relative button and press Start/Pause again.
•Models with LED
ªInsert a pause before the start of the programme, the delay time is
indicated by the corresponding LEDs.
ªTo start the cycle immediately, after the countdown has commenced:
press the Start/Pause button, cancel the delay time by pressing the
relative button and press Start/Pause again.
4.7 Start/Pause
•Start: After selecting the programme and the desired options, press the
START button to start the programme. If a delay time has been selected,
the countdown will start and the display will indicate it. The LED stops
flashing and remains lit for the whole duration of the programme.
•Pause: By pressing the button again, the current programme is interrupted
and the display, or the relative LED, starts flashing. In pause mode it is
possible to open the door on condition that the machine is not performing a
heating phase, the water level is not high and the drum is not in movement.
•When the appliance is paused, the programmes can be modified as
follows:
- All the cycle OPTIONS can be modified before the beginning of the
phase to be modified.
- the SPIN can be modified before the start of the final spin cycle.
•To re-start the programme, press the START/PAUSE button again.

SOI/DT 2005-07 dmm 13/59 599 37 22 15
4.8 “START/RESET” Button
This button performs two functions:
•Cancels the programme: Press the button until the cycle LEDs switch off. The display will show three
flashing hyphens.
•Selects special programmes: In the programme selection and execution phases, this button can be
used to cancel certain phases of the programme so that the appliance effectively performs a special
cycle. In the programme execution phase, the appliance must be paused.
The cycle normally performed by the appliance consists of the following phases:
Wash ÖRinses ÖSpin
ªWhen the button is pressed once: Rinses ÖSpin
ªWhen the button is pressed twice: Spin
ªWhen the button is pressed three times: Only drain
ªWhen the button is pressed four times: Programme cancelled
If the PRE-WASH option is selected, it can be cancelled by pressing this button,
so that the appliance performs the wash only.

SOI/DT 2005-07 dmm 14/59 599 37 22 15
4.9 Display (some models)
The display shows the following information:
ªThree flashing hyphens, when a programme is cancelled by pressing the SKIP/RESET button. The
hyphens will also be displayed when the ON/OFF button is pressed to switch the appliance on, but only
if the cycle selected previously has been cancelled.
ªThe duration of the washing programme is displayed when the programme has been selected. This
time corresponds to the time necessary for the maximum wash load for each programme. When the
programme is started, the time is decremented (updated) at intervals of one minute.
ªRinse hold: the appliance stops with water in the tub at the end of programmes for which the RINSE
HOLD option has been selected; the display shows a zero (fixed).
ªEnd of cycle indicated by a zero (flashing) and, at the same time, the door pilot lamp switches off. The
zero re-appears when the appliance is switched on again, if the previous programme has not been
cancelled.
ªDelayed start, which is selected using the DELAYED START button. The countdown starts when the
START/PAUSE button is pressed, and is decremented at intervals of one hour. During the last 2 hours
the countdown decrements at intervals of 30 minutes.
ªAn alarm code indicates a machine malfunction.
4.10 Phase / warning LEDs
The LEDs indicate different information according to the type of
configuration; the End-of-cycle Led is featured in all models.
Type of LED Functions
Pre-wash Lights during selection mode if the programme includes the pre-wash phase, and during
the execution of the pre-wash.
Wash Lights during selection mode if the programme includes the wash phase, and during the
execution of the wash.
Pre-wash/Wash Lights during selection mode if the programme includes the pre-wash or wash phases, and
during the execution of these phases.
Rinse Lights during selection mode if the programme includes rinse phases, and during the
execution of the rinse.
Spin Lights during selection mode if the programme includes the spin phase, and during the
execution of the spin.
Drain Lights during selection mode if the programme includes the drain phase, and during the
execution of the drain
Extra rinse Lights when this option has been memorized (if featured by the cycle) and during the
execution of the rinse.
Rinse hold Lights if the programme includes the rinse-hold option and at the end of the cycle, when
the appliance stops with water in the tub.
Current cycle Lights during execution of the cycle
End of cycle Lights when the programme has been completed; also used to display alarm conditions
Blocked filter Lights at the end of the cycle if the drain filter is blocked.
Overdosing Lights at the end of the cycle if a detergent overdosing alarm of occurs.
ON/OFF Lights when the appliance is switched on
Door
ªLights when the door is locked by the interlock.
ªSwitches off when the door is released.
ªFlashes when the door is about to release (especially in models with safety device
with PTC)
Time to end Lights when the display shows the time-to-end

SOI/DT 2005-07 dmm 15/59 599 37 22 15
4.11 ON/OFF Button
Press the ON/OFF button to switch the appliance ON. The display shows
three flashing hyphens or a flashing zero. Press the same button to switch the
appliance OFF.
The ON/OFF button is an individual pushbutton, and is not part of the display
board.
4.12 Exclusion of the buzzer at the end of the programme
By pressing the "TEMPERATURE" (2) and "SPIN" (3) buttons
at the same time (or the temperature button with button 4) it is
possible to disactivate the buzzer which sounds to indicate the
end of the programme; by repeating this operation the buzzer
will be activated again.
This function is always available and is memorized until it is
modified.
ªBy holding down a combination of buttons for 2 seconds, it
is possible to exclude the buzzer. This option depends on
the configuration and therefore the buttons may vary
according to the model.
ªIf the buzzer is disactivated there is no sound during
selection or at the end of the cycle, but the alarm remains
on.
4.13 Variation of the rinses according to the options
Number of rinses for each option
Normal
Half load
Super rinse
Night cycle
Easy-ironing
Exclusion of spin
Super rinse and half
load
Super rinse and night
cycle
Night cycle and half load
Night cycle,
super rinse and half
load
Sensitive
Normal 3 2 5 6 6 6 4 8 5 7 4
Eco – Energy label 3 2 5 6 6 6 4 8 5 7 4
COTTON
Very short 2 2 4 5 5 5 4 7 5 7 3
Normal 3 - 5 4 4 4 - 6 - - 4
Eco – Energy label 3 - 5 4 4 4 - 6 - - 4
SYNTHETIC
FABRICS Very short 2 - 4 3 3 3 - 6 - - 3
Normal 3 - 5 3 - 3 - 5 - - 4
Eco – Energy label - - - - - - - - - - -
PROGRAMMES
DELICATES
Very short 2 - 4 2 - 2 - 4 - - 3

SOI/DT 2005-07 dmm 16/59 599 37 22 15
5 WASHING PROGRAMMES
The washing programmes and the functions of each button vary for the different models since they
are determined by the configuration of the appliance.
5.1 Possible programmes
The washing programmes can be configured: the basic programmes are listed in the table below.
Programme Temperature (°C) No. of rinses Final spin (rpm)
90 87
90E 67(***)
60 60
60E 50 (*)(**)(***)
50 50
50/40E 44 (*)(***)
40 40
30 30
Cotton
cold 20
3 450/650/850/1000/1200/
1300/1400/1600
60 60
60/50E 42 (*)
50 50
40 40
30 30
Synthetics
cold 20
3 Max. 900
40 40
30 30
Delicates
Duvet
Silk cold 20
3 450/700
40 40
30 35
Wool
cold 20
3 Max. 900
40 40
30 35
Hand wash
cold 20
3 Max. 900
60 60
50 50
40 40
30 30
Jeans
cold 20
5 450/650/850/1000/1200/
1300/1400/1600
40 40
30 30
Shoes
cold 20
3 Max. 1000
Soak 30/20 ---- ----
Rinses ---- 3 Max. 1600
Delicate rinses ---- 3 Max. 700
Softener ---- 1 Max. 1600
Drain ---- ---- ----
Spin ---- ---- Max. 1600
Delicate spin ---- ---- Max. 700
Mini 30 2 Max. 1000
(*) “Energy label” programmes
(**)
Programme Group Temperature (°C)
G18 50
G19 53
G20 45
COTTON 60 E
G21 47
(***) According to the configuration of the appliance, 2 or 3 rinses may be performed.

SOI/DT 2005-07 dmm 17/59 599 37 22-15
6 WASHING PROGRAMMES
6.1 Basic programmes for Cotton / Linen: cold – 30-40-60-90 (without options) for G17/18/19/20/22
N.B. Data subject to modification
(*) see details on p. 33/34
Phase N. Function Time/control Movement
Heating°C Notes
Delay - Delayed start Delay time No movement
0 Drain VAE + 2”+
6” pause No movement
1 Water fill P1 + QPW1 (*)
2 Cold wash 5’ D55 from full Refill: P1(*)
3 Water fill QPW2 (*)
4 Heating T 30°
Cold = 20°C
5 Maintenance 10’
D55
6 Drain + spin VAE + 14” + 4,5’ C0 300/450/650 rpm
Pre-wash
7 Drain 20” No movement
8 Cotton water fill P1 + Qhl (*)
9 Cold wash 10’ N55 from full Refill: P1+Qw(*)
10 Cotton heating T N55 20/30/40/60/ (87-84)
11 Maintenance 4’(87°/84°)/5’(20-30°-40°) /10’(60°) E55
12 Cotton heating T E55 30/40/60/(87-84)
13 Maintenance 14’(87°-84°)/35’(20°-30°-40°) /20’(60°) E55
14 Cooling water fill Qc (*)Cooling
15 Movement 2’ D55 Only for (87°/84°) se >67°C
16 Drain VAE + 14” No movement
17 Drain + spin 5’ C1 450/650/850 rpm
Wash
18 Drain 20” No movement No movement
19 Cotton water fill P1
20 Movement 5’ N 55 from full Refill: P1+Qn1(*)
21 Drain VAE + 14” No movement
22 Drain + spin 5’ C2 450/650/850/1000rpm
1st
rinse
23 Drain 20“ No movement
24 Cotton water fill P1+Qn2(*)
25 Movement 5’ N 55 from full Refill: P1+Qne(*)
26 Drain VAE + 14” No movement
27 Drain + spin 5’ C2 450/650/850/1000rpm
2nd
rinse
28 Drain 20“ No movement
29 Cotton water fill P1
30 Movement 30”
31 Time water fill Qn3(*)
32 Movement 8’
N 55 from full
Refill: P1(*)
33 Drain VAE + 15” No movement
34 Drain + spin 9’ COT_CF 450/650/850/1000/ Max.
Rinses
Last rinse
(conditioner)
35 Untangling 1’ N55

SOI/DT 2005-07 dmm 18/59 599 37 22-15
6.2 Cotton / Linen Cycles: 90 Eco, 60 - 40/50 “energy label” (without options) for G17
Phase N. Function Times/Controls Movement Heating °C Note
Delay - Delayed start Delay Time No Movement
0 Drain VAE + 2”+
6” pause No Movement
1 Water fill P1 + QPW1 (*)
2 Cold wash 5’ D55 from full Refill: P1(*)
3 Water fill QPW2 (*)
4 Heating T 30°
5 Maintenance 10’
D55
6 Drain + spin VAE + 14” + 4,5’ C0 300/450/650 rpm
Pre-wash
7 Drain 20” No Movement
8 Water fill (cotton) P1 + Qe (*) N55 from full
9 Cold wash 2’ Refill: P1+Qwe(*)
10 Water fill (cotton) P1+Qec(*) N55
11 Cold wash 8’ N55 Refill: P1+Qwe(*)
12 Heating (cotton) T N55(67°/64°-44°/40°) E55(53°/45°) 67°/64°-53°/45°-44°/40°
13 Maintenance 10’ (67°/64°)-5’ (53°/45°)-15’ (44°/40°) E55
13a Maintenance 44 15’ E55 Only for 44°/40°C
14 Heating (cotton) T E55 (67°/64°) (44°/40°)
15 Maintenance 30’(67°/64°)-35’(44°/40°) E55(44°/40°)
N55(67°/64°)
15a Maintenance 45’ E55 Only for 53°/45°C
16 Water fill (cotton) Qc (*)
Cooling 17 Movement 2’ D55 Only for (67°/64°) se >67°C
18 Drain VAE + 14” No Movement
19 Drain + spin 5’ C1 450/650/850 rpm
Wash
20 Drain 20” No Movement
21 Water fill (cotton) P1 N 55 from full
22 Movement 5’ Refill: P1+Qne(*)
23 Drain VAE + 14” No Movement
24 Drain + spin 5’ C2 450/650/850/1000rpm
1st rinse
25 Drain 20” No Movement
26 Water fill (cotton) P1 (C1≥850 rpm)
P1+Qn2 (C1<850 rpm)
27 Movement 5’
N 55 from full
Refill: P1+Qne(*)
28 Drain VAE + 14” No Movement
29 Drain + spin 5’ C2 450/650/850/1000rpm
2nd rinse
30 Drain 20” No Movement
31 Water fill (cotton) P1
32 Movement 30”
33 Time water fill Qn3e_90°_40° Qn3e for 60° cycle
34 Movement 8’
N 55 from full
Refill: P1(*)
35 Drain VAE + 15” No Movement
Rinses
Final rinse
(Conditioner)
36 Drain + spin 9’ COT_CF 450/650/850/1000/ Max.
N.B. Data subject to modification
(*) see details on p. 33/34

SOI/DT 2005-07 dmm 19/59 599 37 22-15
6.3 Cotton / Linen Cycles: 90 Eco, 60 - 40/50 “energy label” (without options) for G18
Phase N. Function Times/Controls Movement Heating °C Note
Delay - Delayed start Delay Time No movement
0 Drain VAE + 2”+
6” pause No movement
1 Water fill P1 + QPW1 (*)
2 Cold wash 5’ D55 from full Refill: P1(*)
3 Water fill QPW2 (*)
4 Heating T 30°
5 Maintenance 10’
D55
6 Drain + spin VAE + 14” + 4,5’ C0 300/450/650 rpm
Pre-wash
7 Drain 20” No movement
8 Water fill (cotton) P1 + Qe (*)
9 Cold wash 2’ N55 from full Refill: P1+Qwe(*)
10 Water fill (cotton) P1+Qec(*) N55
11 Cold wash 8’ N55 Refill: P1+Qwe(*)
12 Heating (cotton) T N55(67°/64°-44°/40°) E55(50°/47°) 67°/64°-50°/47°-44°/40°
13 Maintenance 10’ (67°/64°-50°/47°)-40’ (44°/40°) E55
13a Maintenance 44 15’ N55 Only for 44°/40°C
14 Heating (cotton) T E55 (67°/64°)(50°/47°)
(44°/40°)
15 Maintenance 30’(67°/64°)-15’(50°/47°)-20’(44°/40°) E55(50°/47°)-(44°/40°)
N55(67°/64°)
15a Maintenance 5’ N55 Only for 50°/47°C
15b Maintenance 15’ E55 Only for 50°/47°C
16 Water fill (cotton) Qc (*)
Cooling 17 Movement 2’ D55 Only for (67°/64°) se >67°C
18 Drain VAE + 14” No movement
19 Drain + spin 5’ C1
Wash
20 Drain 20” No movement
21 Water fill (cotton) P1(*)
22 Movement 5’ N 55 from full Refill: P1+Qne(*)
23 Drain VAE + 14” No movement
24 Drain + spin 5’ C2 450/650/850/1000rpm
1st rinse
25 Drain 20” No movement
26 Water fill (cotton) P1 (C1≥850 rpm)
P1+Qn2 (C1<850 rpm)
27 Movement 5’
N 55 from full
Refill: P1+Qne(*)
28 Drain VAE + 14” No movement
29 Drain + spin 5’ C2 450/650/850/1000rpm
2nd rinse
30 Drain 20” No movement
31 Water fill (cotton) P1(*)
32 Movement 30”
33 Time water fill Qn3e_90°_40° Qn3e for 60° cycle
34 Movement 8’
N 55 from full
Refill: P1
35 Drain VAE + 15” No movement
Rinses
Final rinse
(Conditioner)
36 Drain + spin 9’ COT_CF 450/650/850/1000/ Max.
N.B. Data subject to modification
(*) see details on p. 33/34

SOI/DT 2005-07 dmm 20/59 599 37 22-15
6.4 Cotton / Linen Cycles: 90 Eco, 60 - 40/50 “energy label” (without options) for G19
Phase N. Function Times/Controls Movement Heating °C Note
Delay - Delayed start Delay Time No movement
0 Drain VAE + 2”+
6” pause No movement
1 Water fill P1 + QPW1 (*)
2 Cold wash 5’ D55 from full Refill: P1(*)
3 Water fill QPW2 (*)
4 Heating T 30°
5 Maintenance 10’
D55
6 Drain + spin VAE + 14” + 4,5’ C0 300/450/650 rpm
Pre-wash
7 Drain 20” No movement
8 Water fill (cotton) P1 + Qe (*)
9 Cold wash 2’ N55 from full Refill: P1+Qwe(*)
10 Water fill (cotton) P1+Qec N55
11 Cold wash 8’ N55 Refill: P1+Qwe(*)
12 Heating (cotton) T N55(67°/64°-44°/40°) E55(53°/50°) 67°/64°-53°/50°-44°/40°
13 Maintenance 10’ (67°/64°)5’ (-53°/50°)-40’ (44°/40°) E55
13a Maintenance 44 15’ N55 Only for 44°/40°C
14 Heating (cotton) T E55 (67°/64°)(53°/50°)
(44°/40°)
15 Maintenance 30’(67°/64°)-25’(53°/50°)-20’(44°/40°) E55(53°/50°)-(44°/40°)
N55(67°/64°)
15a Maintenance 20’ N55 Only for 53°/50°C
16 Water fill (cotton) Qc (*)
Cooling 17 Movement 2’ D55 Only for (67°/64°) se >67°C
18 Drain VAE + 14” No movement
19 Drain + spin 5’ C1
Wash
20 Drain 20” No movement
21 Water fill (cotton) P1(*)
22 Movement 5’ N 55 from full Refill: P1+Qne(*)
23 Drain VAE + 14” No movement
24 Drain + spin 5’ C2 450/650/850/1000rpm
1st rinse
25 Drain 20” No movement
26 Water fill (cotton) P1 (C1≥850 rpm)
P1+Qn2 (C1<850 rpm)
27 Movement 5’
N 55 from full
Refill: P1+Qne(*)
28 Drain VAE + 14” No movement
29 Drain + spin 5’ C2 450/650/850/1000rpm
2nd rinse
30 Drain 20” No movement
31 Water fill (cotton) P1(*)
32 Movement 30”
33 Time water fill Qn3e_90°_40° Qn3e for 60° cycle
34 Movement 8’
N 55 from full
Refill: P1(*)
35 Drain VAE + 15” No movement
Rinses
Final rinse
(Conditioner)
36 Drain + spin 9’ COT_CF 450/650/850/1000/ Max.
N.B. Data subject to modification
(*) see details on p. 33/34