Hitachi L32HP01E User manual

Digital LCD olo r TelevisionCu
Télévision Couleur LCD Digital
Digitales LCD-Farb-TV-Gerät
Televisione a Colori LCD Digitale
L32HP01E
GB
F
D
I
Instructionsforuse
Notice d'utilisation
Bedienungsanleitung
Istruzioni per l'uso

GB -1-
Contents
Headphone ................................................ 21
volume .................................................................. 21
sound mode .......................................................... 21
balance ................................................................ 21
Sound Mode............................................... 21
AVL ........................................................... 21
Effect ......................................................... 21
Dynamic Bass............................................ 21
Subwoofer ................................................ 21
3DS ............................................................ 21
Feature Menu.................................................. 21
PIP .............................................................. 21
PIPON-OFF ......................................................... 22
PIP Picture .......................................................... 22
PIP Position ......................................................... 22
PIP Source .......................................................... 22
PIPSWAP............................................................ 22
PAP ............................................................ 22
PAPON-OFF ........................................................ 22
PAP Picture.......................................................... 22
PAPSource.......................................................... 22
PAPSWAP........................................................... 22
SleepTimer ................................................ 22
ChildLock .................................................. 22
Language................................................... 22
AV-2 Out .................................................... 22
PCAudioIn................................................. 23
Blue Background ....................................... 23
Menu Background...................................... 23
MenuTimeout............................................. 23
Teletext Language ..................................... 23
Default Zoom ............................................. 23
Install Menu ..................................................... 23
Program Table ............................................ 23
Name .................................................................... 23
Insert ................................................................... 23
Delete................................................................... 23
APS(AutoProgrammingSystem) ......................... 24
A.P.S. (Auto Programming System)
Country ...................................................... 24
Program ..................................................... 24
Band .......................................................... 24
Channel...................................................... 24
Colour System ........................................... 24
Sound System ........................................... 24
FineTune ................................................... 24
Search ....................................................... 24
Store .......................................................... 24
Install menu inAV modes ........................... 24
ColourSystem...................................................... 25
VCR...................................................................... 25
Store .......................................................... 25
Source menu .................................................. 25
Safety Precautions ........................................... 3
Features ............................................................. 6
Accessories...................................................... 6
LCD TV Front View ........................................... 7
Rear View and Peripheral Connections ....... 7
Remote Control Buttons ................................. 8
Preparation ........................................................ 9
Before Switching On Your TV ......................... 9
Power Connection ............................................ 9
Connections to the Aerial Input Socket ............. 9
Inserting Batteries In the Remote Control
Handset ............................................................ 9
Handlingthe RemoteControl ............................. 9
Operating Range for the Remote Control .......... 9
Switching The TV ON/OFF .............................. 10
Navigating the Menu System ........................ 10
Initial Settings ................................................. 10
Everyday Operation ........................................ 11
Information Banner ......................................... 11
ELECTRONICPROGRAMMEGUIDE(EPG) ........ 11
Displaying The Subtitles .................................. 12
Teletext ........................................................... 12
DTV Menu System .......................................... 12
Channel List .................................................... 12
Navigating the whole channel list .............. 13
Moving the channels in the channel list...... 13
Deleting the channels in the channel list .... 13
Renaming channels ................................... 13
Adding locks to channels........................... 14
Setting Favourites...................................... 14
How to Add a Channel to a Favourite List: ......... 14
On Screen Help Pressing INFO Button ............... 14
Installation ....................................................... 15
Configuration .................................................. 16
Timers............................................................. 18
TV Setup......................................................... 19
CommonInterface........................................... 19
Analogue TV Menu System .......................... 20
Picture Menu ................................................... 20
Mode .......................................................... 20
Contrast/Brightness/Sharpness/
Colour/Hue ................................................. 20
ColourTemp ............................................... 20
Noise Reduction......................................... 20
FilmMode ................................................... 20
3DComb .................................................... 20
PictureZoom.............................................. 20
Reset ......................................................... 20
Sound Menu.................................................... 20
Volume....................................................... 20
Equalizer .................................................... 20
Balance...................................................... 21

GB -2-
PC Mode ........................................................... 25
Installation ....................................................... 25
Menu System in PC mode................................ 25
Sound Menu/Feature Menu ........................ 25
PCPicture Menu......................................... 25
PCPOSITIONMenu .................................... 25
Autoposition............................................... 25
H (Horizontal) Position ............................... 26
V (Vertical) Position ................................... 26
Phase ........................................................ 26
DotClock.................................................... 26
SoundinPCmode...................................... 26
Other Features................................................ 26
TV Status ........................................................ 26
MuteIndicator ................................................. 26
PIPandPAPModes ......................................... 26
AV Modes ....................................................... 26
Zoom Modes ................................................... 27
Auto........................................................... 27
Zoom ......................................................... 27
Cinema ....................................................... 27
16:9 Zoom.................................................. 27
Subtitle ....................................................... 27
4:3 ............................................................. 27
14:9 Zoom.................................................. 27
Panoramic .................................................. 27
Freeze Picture ................................................ 27
Teletext............................................................. 28
Connect Peripheral Equipment.................... 28
HighDefinition ................................................. 28
Via the Scart................................................... 28
Via Aerial Input ................................................ 28
Decoder .......................................................... 28
Connect a decoder with an aerial
socket to the TV ........................................ 28
Connect a decoder without an
aerial socket to the TV ............................... 28
TV and Video Recorder.................................. 28
PlaybackNTSC ............................................... 29
Camera and Camcorder.................................. 29
To Connect to AV Input .............................. 29
To Connect to S-VHS Input ........................ 29
Connect the Decoder to the
Video Recorder .............................................. 29
Connecting Headphones (optional)................. 29
Audio Lineout.................................................. 29
Connecting Subwoofer .................................. 29
Tips ................................................................... 29
Care Of the Screen ........................................ 29
PoorPicture .................................................... 29
NoPicture ....................................................... 29
Sound ............................................................. 29
RemoteControl ............................................... 29
Peripheral Equipment Connections ............ 30
Aerial Connection ........................................... 30
Specifications.................................................. 31
S-input connector pin specifications .............. 33
HDMI connector pin specifications.................. 33
SCART connector pin specifications .............. 33
SignalInput ..................................................... 33
PC RGB Terminal (D-sub 15-pin connector) .... 33
Appendix A: PC Input Typical
Display Modes ................................................. 34
Appendix B: AV and HDMI Signal
Compatibility ................................................... 35
Appendix C: Main and PIP-PAP
Picture Combinations .................................... 36
Appendix D: AV Source Selection ................ 36
UK Guarantee................................................... 37

GB -3-
Safety Precautions
Please read the following recommended safety pre-
cautions carefully for your safety.
IMPORTANT SAFETY
INFORMATION ON OPERATING
YOUR TV
Do’s and Don’ts
DO’s
This Television has been designed and manu-
factured to meet international safety standards,
but like any electrical equipment, care must be
taken if you are to obtain the best results and
safety is to be assured.
DO read the operating instructions before you
attempt to use the equipment.
DO consult your dealer if you are in any doubt
about installation, operation or safety of your
equipment.
DO be careful with glass panels or doors on
equipment.
ThisTV issupplied witha fittedmainsplug. This
plug must notbe cut offas it maycontain a spe-
cialradiointerference filter,theremovalofwhich
could lead to impaired performance. If you wish
to extend the lead, obtain an appropriate safety
approved extension lead or consult your dealer.
Observe the manufacturers instructions when
connectingextensionleadstotheTV. Checkthe
fuse rating on the newplug, this shouldbe fitted
witha5Ampfusewhich conformstoeitherASTA
or BSI (BS1 362) approvals, these are easily
identifiablebyeitherthe or symbols. If
you are in any doubtabout the installation of an
extension lead, please consult a competent
electrician.
DON’Ts
DON’T continue tooperate theequipmentif you
are in anydoubtaboutit working normally, orif it
is damaged in any way switch off, withdraw the
mains plug and consult your dealer.
DON’T place water filled vessels on top of T.V.
cabinets.
DON’T remove any fixed cover as this may ex-
pose dangerous voltages.
DON’T leave equipment switched on when it is
unattended unless it is specifically stated that it
is designed for unattended operation or has a
stand-by mode. Switch off using the switch on
the equipment and make sure your family know
howtodo this. Special arrangementsmayneed
to be made for infirm or handicapped people.
DON’Tuseequipmentsuchaspersonalstereos
or radios so that you are distracted from the re-
quirements of traffic safety. It is illegal to watch
television whilst driving.
DON’Tobstructtheventilationoftheequipment,
for example with curtains or soft furnishings.
Overheating will cause damageandshorten the
life of the equipment.
DON’T usemakeshift standsandNEVERfixlegs
or stands to the TV with any screws other than
those provided - to ensure complete safety al-
ways use the manufacturers approved stand
with the fixings provided.
DON’Tallowelectricalequipmenttobeexposed
to rain or moisture.
ABOVE ALL
• NEVER let anyone, especially children push
anything into holes, slots or any other open-
ing in the case - this could result in a fatal
electric shock.
• NEVER guess or take chances with electrical
equipment of any kind - it is better to be safe
than sorry!
Surely connect
the ground wire.
PE Connection to mains
Be sure to ground the connection properly. Connect the ground terminal
of TV with the ground terminal provided at the power outlet using the
enclosed power cord. If the provided plug does not fit your outlet, con-
sult an electrician for replacement of the obsolete outlet.

GB -4-
1.Power Source
TheTV set should beoperated onlyfrom a 220-240 V
AC, 50 Hz outlet. Ensure that you select the correct
voltage setting for your convenience.
2.Power Cord
Do not place the set, a piece of furniture, etc. on the
power cord (mains lead) or pinch the cord. Handle
thepower cord bythe plug. Do not pull out the plug by
tugging the cord and never touch the power cord
when your hands are wet as this could cause a short
circuit orelectric shock. Never makea knot in the cord
or tie it with other cords. The power cords should be
placed in such a way that they are not likely to be
stepped on. A damaged power cord can cause fire or
give you an electric shock. When it is damaged and
needs to be changed, it should be done by qualified
personnel.
3. Moisture and Water
Donotusethisequipmentinahumidanddampplace
(avoid the bathroom, the sink in the kitchen, and near
the washing machine). Do not expose this equipment
to rain or water, as thismay be dangerous and do not
place objects filled with liquids, such as flower vases,
on top. Avoid from dripping or splashing.
Ifanysolidobjectorliquidfallsintothecabinet,unplug
the TV and have it checked by qualified personnel
before operating it any further.
4.Cleaning
Before cleaning, unplug the TV set from the wall out-
let. Donot useliquidor aerosol cleaners. Use soft and
dry cloth.
5. Ventilation
Theslots and openings onthe TV set are intended for
ventilation and to ensure reliable operation. To pre-
vent overheating, theseopenings mustnot beblocked
or covered in anyway.
6. Heat and Flames
The set should not be placed near to naked flames
and sources of intense heat, such as an electric
heater. Ensure that no naked flame sources, such as
lighted candles, are placedontopof the TV. Batteries
shall not be exposed to excessive heat such as sun-
shine, fire or the like.
7. Lightning
In case of storm and lightning or when going on holi-
day, disconnect the power cord from the wall outlet.
8. Replacement Parts
When replacement parts are required, be sure the
service technician has used replacement parts which
are specified by the manufacturer or have the same
specifications as the original one. Unauthorized sub-
stitutions may result in fire, electrical shock, or other
hazards.
9. Servicing
Please refer all servicing to qualified personnel. Do
not remove the cover yourself as this may result in an
electric shock.
10.Waste Disposal
Instructions for waste disposal:
• Packaging and packaging aids are recyclable and
shouldprincipally be recycled. Packaging materials,
such as foil bag, must be kept away from children.
• Battery, including those which are heavy metal-free,
should not be disposed of with household waste.
Please dispose of used battery in an environmen-
tally sound manner. Find out about the legal regula-
tions which apply in your area.
• Cold cathode fluoresant lamp in LCD PANEL con-
tains a small amount of mercury; pleasefollowlocal
ordinates or regulations for disposal.
Information for users applicable
in European Union countries
This symbolontheproduct oronits packagingmeans
that your electrical and electronic equipment should
be disposed at the end of life separately from your
household wastes. There are separate collection
systems for recycling in EU.
Formore information, pleasecontactthelocal author-
ity or the dealer where you purchased the product.
11. Disconnect Device
Themains plug is used to disconnect TVset from the
mains and therefore it shall remain readily operable.
12. Excessive sound pressure from earphones and
headphones can cause hearing loss.
13. To prevent injury, this device must be securely
attached to the wall in accordance with the in-
stallation instructions when mounted to the wall
(if the option is available).

GB -5-
14. Connection to a television
distribution system(Cable TV etc.)
from tuner:
Apparatus connected to the protective earthing of
the building installation through the mains connection
or through other apparatus with a connection to pro-
tective earthing - and to a television distribution sys-
tem using coaxial cable, may in some circumstances
create a fire hazard.
To ground the antenna system properly, be sure that
the cable grounding is connected with the building's
grounding system. Note that the connection should
follow IEC 60364-7-707 and IEC 603646-5-548 stan-
dards which require that the grounding should be as
close as possible to the cable connection.
VHF/UHF
75
REAR OF THE TV
CABLE TV

GB -6-
Features
• Remote controlled colour LCD TV.
• Fully integrated Digital TV (DVB-T)
• 100 programmes from VHF, UHF bands or cable
channels can be preset.
• It can tune cable channels.
• Controlling the TV is very easy by its menu driven
system.
• It has 2 Scart sockets for external devices (such as
video, video games, audio set, etc.)
• Stereo sound system (German+Nicam).
• Full function Teletext (1000 pages).
• Fastext, TOP text.
• Headphone connection.
•A.P.S. (Automatic ProgrammingSystem).
•All programmes can be named.
• Forward or backward automatic tuning.
•Sleeptimer.
• Child Lock.
• Automatic sound mute when no transmission.
•NTSCPlayback.
•AV in and S-VIDEO in are available.
• It has two HDMI connectors for Digital Video and
Audio. This connection is also designed to accept
HighDefinitionsignals.
•AVL (Automatic Volume Limiting)
• When novalidsignal is detected, after5 minutes the
TV switches itself automatically to stand-by mode.
• PLL (Frequency Search)
•PCInput
• Plug&Play for Windows 9X, ME, Vista, 2000, XP.
•Audio Line Out
Accessories
EUPlug



 
   







  
  



RemoteController
CLE-984
Batteries
2 X AA
Instruction Book
Quick Guide

GB -7-
LCD TV Front View
Rear View and Peripheral Connections
S-VIDEOInput(S-VHS)
Video Input (AV-4)
Audio Inputss
Headphone
Audio Line Outss
Subwoofer Output
Power Cord Input
Power On/Off Switch
HDMIInput2(HDMI2)
HDMIInput1(HDMI1)
PCInput(PCRGB)
PCAudioInput
RF (TV/DTT)
Component Video Inputs (YPbPr)
ComponentAudio Inputss
SCART 1 (AV-1)
SCART 2 (AV-2)
For Service Use Only
CI Slot
Note:BecauseFAV CVBSandSVHSYareconnectedparallelly, thepicturemayblend ifthetwo peripheralsareusedatthesame
time. Likewise, because SVHS C and SCART II R are connected parallelly, the picture may blend if the two peripheralsare used
at the same time. Thus these two are not to be used at the same time.
SOURCE SELECT
MENU BUTTON
PROGRAMME UP/DOWN
VOLUME UP/DOWN
STANDBY BUTTON
Standby LED
IR Receiver
Built in Speakers
Table Top Stand (Fixed)
FRONTVIEW

GB -8-
Remote Control Buttons
** These buttons can control most Hitachi DVD Players and Recorders.
RGB2
TV/DTT
I/II
MENU GUIDE
DVD SAT INPUT
RETURN
FUNCTION
OK
P
123
456
789
0
AV1 AV2
A
V3
AV4 AV5 HDMI1
HDMI2
....
+
= Stand by On/Offf
= Info
DVD = Select DVD
TV/DTT = Selector button for Digital/Analogue mode
= Hold in teletext mode, Freeze picture
/ = Volume Up/ Down
= Mute On/Off
RED (DTV = Channel List / Fastext Button)
GREEN (DTV = Subtitle On/Off / Fastext Button)
= Teletext On-Offf
= Update
= Menu On/Off
b
/
a
/
_
/
`
= Cursor buttons

FUNCTION = No function
= Equalizer Sound Mode
= Aspect ratio
= No Function
Control buttons for DVD players/recorders (**)
= Go back to previous menu
OK = Enter
/ / GUIDE = Index Page / Guidefor DTT


= TXT Subtitlein TV mode; Subpage in teletext mode.
= Reveal
BLUE (DTV = Favourites List / Fastext Button)
YELLOW (DTV = Audio Language On/Off / Fastext Button)
P+/ - = Programme Up/ Down
= Mono/Stereo - DualA-B
= PIP, PAPOn-Off / PATAT
0 - 9 = Digit buttons
/INPUT=INPUT


SATT = Select SAT


= No function


= Picture mode
For source selection, first press INPUT button on the remote controller then source button (AV1, AV2, AV3,
AV4, AV5, HDMI1,HDM2) which you want to switch.

GB -9-
Preparation
Forventilation, leavea space of at least 10 cm freeall
around the set. To prevent any fault and unsafe situ-
ations, please do not place any objects on top of the
set.
Use this apparatus in moderate climates.
Before Switching On Your TV
Power Connection
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz.
•After unpacking, allow theTV set to reach the ambi-
ent room temperature before you connect the set to
themains.
Connections to the Aerial Input Socket
•Connect the aerialorcableTVplugto theAerial input
socket located at the rear of theTV and connect the
cable plug coming out from the TV out socket lo-
cated onthedevices (VCR, DVB etc.)to this socket
as well.
Inserting Batteries In the Remote
ControlHandset
WARNING:Remotecontrolisbatteryincluded.Aplas-
tic protector is used to disconnect the batteries in
order to prevent the battery life from reducing. Please
remove the plastic protector before the first use.
• Remove thebatterycoverlocated ontheback of the
handset by gently pulling backwards from the indi-
cated part.
• Insert two AA/R6 or equivalent type batteries inside.
Placethebatteries intherightdirections and replace
the battery cover.
Note: Remove the battery from remote control hand-
set when it is not to be used for a long period. Other-
wise it can be damaged due to any leakage of bat-
tery.
Handling the Remote Control
• It could cause corrosion or batteryleakage and may
result in physical injury and/or property damage in-
cluding fire.
• Never mix used and new batteries in the device.
•Replaceallthebatteriesinadeviceatthesametime.
• Remove the batteries if the remote control is not
going to be used for an extended period of time.
• To avoid possible failure, read the following instruc-
tions and handle the remote control properly.
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquidon the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under the direct
sunlight or near sources of excessive heat.
Note: Remove the battery from remote control hand-
set when it is not to be used for a long period.
Otherwise it canbe damaged due to any leak-
age of battery.
Operating Range for the Remote Control
• Point the top of the remote control toward the LCD
TV's remote sensor LED while pressing a button.
 

 
  
    
  


 



     
    

 

30 30
Remote range is approximately 7m/23ft.

GB -10-
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1-Connectthepowercordtothesystem.PressPower
On/Off switch. Then the TV switches itself to
stand-by mode (optional).
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected, or Press the "-P/CH"
or "P/CH+" button on the TV or press the P+ or P-
button on the remote control, so that last mode
switched off is selected.
By either method the TV will switch on.
To switch the TV off:
• Press the “ (stand-by)” button on the remote con-
trol or On/Off switch on theTV, so the TV will switch
to stand-by mode.
To power down the TV completely, press On/Off
switch
or,
Unplug the power cord from the mains socket.
Navigating the Menu System
MENU GUIDE
RETURN
OK
+
For Displaying
Menu Options For Navigation
To Confirm Choices
1- Press to display the menu.
2- Press
_
/
`
button to select an icon.
3- Use
a
/
b
button to highlight. Press
`
for more
optionsinanalogueTVmode.UseOK inDTVmode
for viewing a submenu.
4- Press
_
/
`
buttons to change the settings. Press
OK to set as default.
5- To exit the menu or return from sub-menu screen,
press .
These explanations are available for the navigation
of the whole menu system. To select options that are
explained in the following parts, refer to “Navigating
The Menu System”.
InitialSettings
When the TV is turned on for the first time, IDTV is on
first. Because this is the first time that IDTV has been
used, there are no channels stored in the memory.
When the TV is turned on for the first time, the menu
for the language selection appears on the screen.
The message “Welcome please select your lan-
guage!” is written in all language options sequen-
tially in the menu on the screen.
By pressing or buttons highlight the language
you want to set and press OK button. In the menu
“Set Language” is written nextto “OK” item to indicate
that “Press SELECTbutton to set the highlighted lan-
guage option.”
You can get information about the menu usage by
pressing button. And press button again to
exit the help menu.
After then, First time Installation Menu will appear on
screen. By pressing or buttons, selected coun-
try item you want to set and press OK button.
First time installation



Czech
After the First time Installation is set, the following
message appears on the screen.
Do you want to start automatic search?
Yes No
• To start automatic search, select Yes, to cancel
select No.
•To selectanoption“YesorNo”, highlightthe item by
using or buttons and press OK button.
The IDTV will automatically tune to the transmission
channels according to selected country standards
looking for digital terrestrial TV broadcasts and dis-
playing the names of channels found. This process
will take about five minutes. To cancel searching, you
can press button at any time during the process.
MENU
Codec 4:3
Codec 16:9
Searching UHF channels 62. Please wait. This will take a few minutes
Cancel searching
Automatic Search

GB -11-
After Automatic Search process is completed, the
followingmessageaskingforanaloguechannelsearch
appears on the screen. TV switches to the analogue
TVmode:
Country
Language
UK
Ok
Cancel
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
TXT Language
Auto Program
By pressing or button, adjust the Country item
and press to highlight Language item. Use or
button to set Language. Use or buttons to
select TXT Language and set it by using or
buttons. Press OK button to continue:
For more information on this process, see “Install
Menu” section.
Everyday Operation
Pressing the TV/DTT button at any time while watch-
ing television programmes will switch the TV set be-
tween the digital terrestrial television broadcasting
and the analogue broadcasting.
Information Banner
• Whenever you change the channel using the P + or
P - buttons or the number buttons, TV displays the
channel picture along with an information banner at
the bottom of the screen. This will remain on the
screen for approximately three seconds.
• The information banner can also be displayed by
pressing the button at any time while watching
the TV. Pressing the button again removes the
banner.
4 RTL 09:10
CH 48
Now: NEWS
Next: NEWS
Signal : 04:35-11:00
11:00-17:55
The information banner gives a number of facts on
the channel selected and the programme on it:
• The name of the channel is displayed along with its
channellist numberandanindicationofthestrength
of the signal received on this tuning channel.
• The current and next programme information are
given with the start and finish time.
• The current time information is displayed along with
channel name.
Hint
Notall channelsbroadcast the programme data. If the
name and times of the programme are not available
then “No InformationAvailable” is displayed in the in-
formation banner.
If the selected channel is locked, you must enter the
correct four digit key to view the channel.
Enter Lock Key
ELECTRONICPROGRAMMEGUIDE(EPG)
Some, but not all, channels send information about
the current and next events. Please note that event
informationisupdatedautomatically.Ifthereisnoevent
information data available for channels, only channel
name with “No Information Available” banner is
displayed.
• Press GUIDE button to view the EPG menu.
• Press or buttons to navigate in Channels or
Programmes.
• Press or buttons to navigate through the
channel and programme list.
• In EPG Menu, youcan easily see the extended help
information by pressing the button andby press-
ing this button again you can close this window.
News 10:00-11.00
1. ONE Commonwealth … Nachrighten
2. BBC TWO Driven Crazy Clifford The Big Red Dog
5. five The Chart Dawson’s Creek
Navigate Schedule Watch More
Electronic Programme Guide Wed 31/7 09:13
1 ONE
OK
5. FIVE The Chart Dawson’s Creek
• In the EPG Menu all channels are displayed. The
current channel is highlighted when you enter the
EPGmenu.
• Use or buttons to change the channel. Also
pressREDorGREENbuttonstomakepageup/down
scroll for the channels. And press OK button to
watch the highlighted channel.
• If you highlight an event, short event description,
extended event description, start and finish time of
the event are displayed on the screen.

GB -12-
• If you press OK button when a next event is high-
lighted, a reminder is set for the highlighted
programme and a clock icon appears across the
highlighted channel line as shown in the following
EPGmenufigure.
Programme reminders is set to signal that a
programme is about to start when you are watching
another channel. If you setreminderto a programme,
then you will be asked for switching to that channel
when the reminder time is reached.
News 10:00-11.00
1. ONE Commonwealth … Nachrighten
2. BBC TWO Driven Crazy Clifford The Big Red Dog
5. five The Chart Dawson’s Creek
Navigate Schedule Reminder More
Electronic Programme Guide Wed 31/7 09:13
1 RTL
OK
5. FIVE The Chart Dawson’s Creek
I
I
• By pressing the BLUE button you can view the ex-
tended schedule of the programmes.
• By pressing the button you can see the detailed
help information easily. And by pressing button
again you can exit Help menu.
BypressingtheBLUEbutton,thefollowingEPGMenu
appears on the screen.
1. BBC ONE
2. BBC TWO
5. Five
7. BBC Choice
11.DISCOVERY
15.BBC NEWS 24
17.BBCi
I
More
A
dvance Day
Electronic Programme Guide Wed 21/4 10:12
No Information Available
BBC ONE TUE 21/4, 20:00-22:00
Navigate Change Time
• By pressing YELLOW / BLUE button, you can ad-
vance the schedule backward / forward of a day.
• By pressing GREEN / RED buttons you can change
the schedule time.
• If you press button youcansee the detailed help
information easily.And by pressing button again
you can exit Help menu.
Displaying The Subtitles
With Digital terrestrial broadcasting (DVB-T), some
programmes are broadcast with subtitles. Subtitles
can be displayed when watching these programmes.
• Whenever GREENbutton is pressed,Subtitleselec-
tion OSD will be displayed on the screen. You can
set Subtitles as ON or OFF. For Subtitle Language
options, refer to “Language Settings” in the “Con-
figuration Menu” section.
TELETEXT
Use of teletext and and its functions are identical to
theanaloguetext system.Please dorefer tothe “Ana-
logue teletext” explanations.
DTV Menu System
The IDTV Menu can only be shown when watching
Digital terrestrial broadcasting. Press theTV/DTTbut-
ton to turn the IDTV on while TV is in the analogue
mode.
Press button.
The menu below appears on the screen:
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
Channel List
Using or buttonsontheremotecontrolin Main
menu, make sure that the first item, Channel List, is
highlighted and press the OK button to display the
Channel List.
The following operations can be performed in this
menu:
1. Navigating the whole list of channels
2. Moving channels*
3. Deleting channels
4. Renaming channels
5. Adding locks to channels
6. Setting favourites
*Depending on your selection of Country in the
first time installation, “MOVE” option of the
Channel List may not be visible.
Channel List is the place where the channels are
managed.

GB -13-
SELECT
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Select
Function Select Channel Watch More
1 BBC ONE
OK
i
Delete Edit Name Lock Favourites
Navigatingthewholechannellist
• Press or keys for selecting the previous or
next channel.
• You can press or buttons to move page up or
page down.
• To watch a specific channel, highlight it using or
buttons and then press OK button, while the
“Select” item on Channel List menu is highlighted
via using or buttons.
Movingthechannelsinthechannellist
• Press or buttons to select the channel that
will be moved.
• Press or buttons to select the ‘’Move’’ item on
ChannelListmenu.
“Move” is written next to “OK” item to indicate that
press OK to move the highlighted channel to the de-
sired position on the channel list.
SELECT
i
OK
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Function Select Channel Move
More
1 BBC ONE
Select Delete Edit Name Lock
Favourites
Move
• Press OK button, the selected channel becomes
highlighted.
• Use or buttons to select the new position of
the channel and press OK button to place the chan-
nel to the selected position and return the menu.
Deletingthechannelsinthechannellist
• Press or buttons to select the channel that
will be deleted.
•Press or buttonsto select the‘’Delete’’item on
ChannelListmenu.
As seen on Channel List menu, “Delete” is written
next toOKitematthebottom ofthe screentoindicate
that press OKbuttontodelete thehighlighted channel
in the channel list.
SELECT
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Select
Function Select Channel Delete More
1 BBC ONE
OK
i
Delete Edit Name Lock Favourites
Press OK button to delete the highlighted channel in
the channel list. Then the message below appears on
the screen.
The selected service will be permanently deleted, and
favourite list will be turned off. Are you sure?
Yes No
• Press or buttons to highlight the desired op-
tion.
• If OK button is pressed while “Yes” is highlighted,
the highlighted channel is deleted.
• Selecting “No” cancels the delete operation.
Renamingchannels
To rename a specific channel, the channel must be
highlighted via pressing or buttons and then
highlight the “Edit Name” item by pressing or
buttons. Press OK button to activate rename feature.
SELECT
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Function Select Channel
Edit Name More
1 BBC ONE
OK
i
Delete Edit Name Lock FavouritesSelect
Now pressing or buttons moves to the previ-
ous/next character. Pressing or buttons

GB -14-
toggles the current character, i.e., ‘b’ character be-
comes ‘a’ on and ‘c’ on . Pressing the numeric
buttons ‘0...9’ replaces the highlighted character with
the characters printed above the key one by one as
the button is pressed.
Pressthe buttontocanceltheeditingorOKbutton
to save the new name.
Addinglockstochannels
Channel Locking provides a password-protected ac-
cess to channels selected by parents.
In order tolock a channelyou shouldknowthe Paren-
tal Lock password (default value is set to 0000 in the
factory and can only be changed from the Configu-
ration Menu).
By pressing or buttons, highlight the channel
to be locked and select the “Lock” option by press-
ing or buttons.Then press the OK button, a
password box is displayed.
SELECT
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Select
Function Select Channel
Lock/Unlock More
1 BBC ONE
OK
i
Delete Edit Name Lock Favourites
Enter Lock Key
SettingFavourites
You can set various channels as favourites so that
only the favourite channels are navigated. To set a
favourite you should highlight the “Favourites” item
at bottom of the Channel List menu.
To set a favourite you should highlight the
“Favourites” item at bottom oftheChannel List menu,
and thenpressingOKkey,EditFavouriteListsmenu
appears on the screen.
You can list your favourite channels using List 1, List
2, List 3, List 4 or List 5.
Using 5 lists enables listing channels for diffrerent
categories (sport, music etc.). And by activating the
favourites list number that you want in Favourite
Mode submenu of Configuration menu, you enable
only the channels in the selected list. Configuration
menu is entered from the Main Menu.
SELECT
i
OK
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
Select List Select Channel Add/Remove More
List 1 List 2 List 3 List 4 List 5
How to Add a Channel to a Favourite List:
• By pressing / buttons, highlight the channel
that you want to add to the favourite list.
• Select the list number by pressing / buttons.
• By pressing button, the highlighted channel is
added to selected list number.
For each channel, an icon indicates which favourite
list a channel is in. (i.e. In figure above, icon
indicates that BBC ONE is added to List 1.)
To remove any channel that is added to a
favourite list:
• Highlight the channel that you want to remove from
the favourite list you have added;
• Highlight the list number that the channel will be
removed, and press OK button. The icon indicating
the added list number disappears on the menu.
Note: A channel can be added to more than one
favourite list.
To activate Favourites, go to the Configuration menu
and select the list number in Favourite Mode you
want to activate by pressing or buttons. ToTo
cancel Favourites, set Favourite Mode to Off.
Using BLUE button to navigate through the
favourite channels:
You can navigate through the favourite channel lists
viapressingBLUEbutton.Foreachpressingof BLUE
button, you can navigate through the favourite chan-
nels that are top ofthe each channel list, sequentially.
While a channel list is selected, you can navigate
through the favourite channels in that list by pressing
P + or P - buttons.
OnScreenHelpPressingINFOButton
For all menus press button to display the help
information about the menu functions. For Channel
List menu the following message is displayed on the
screen.

GB -15-
Press the SELECT button on your remote control to tune to the
highlighted channel.
Press MENU to exit this screen.
Hint:
Entering More item pressing button gets
quick and easy use of the all menus in IDTV
displaying information for the highligted menu
item.
Installation
The Installation menu mainly intends to help you for
building a Channel Table in most efficient way.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
This menu includes the following items:
1. Automatic Search
2. Manual Search
3.FirstTimeInstallation
Installation
Automatic Search
Manual Search
First Time Installation
Automatic Search:
Automatic search is started by pressing OK button
while Automatic Search item is highlighted.
The following message appears on the screen.
Please check antenna connection. Do you want to start
automatic search? Your previous channel list will be....
Yes No
Highlight “Yes” or “No” via using or buttons
and press OK button to select.
If “Yes” is selected, Automatic Search is started.
Selecting “No” cancels Automatic Search.
After search is completed for digital channels, a mes-
sage asking search for analogue channels appears
on the screen.
Yes
Do you want to search for
analogue channels?
No
Highlight “Yes” and press OK button to searh for
analogue channels.The following menu appears on
the screen for analogue channel search.
Country
Language
UK Ok
Cancel
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
TXT Language
Auto Program
By pressing or button, adjust the Country item
and press to highlight Language item. Use or
button to set Language. Use or buttons to
select TXT Language and set it by using or
buttons. Press OK button to continue:
UK
P 03 - C 04
63.75 MHz
6%
63.75 MHz
Cancel
APS is running...
After APS is finalized, the programme table will ap-
pear on the screen. In the programme table you will
see the programme numbers and names assigned to
theprogrammes.
If you do not accept the locations and / or the

GB -16-
programme names, you can changethem in aps sub-
menu in the settings menu.
All the services are searched and a channel table is
created automatically.
All channels found are stored in a sorted form with
respect to their channel numbers. Some services
may not appear with the correct channel number. At
the time of printing, not all broadcasters are sending
their channel number information.
Manual Search:
In Manual Search, the number of the multiplex is
entered manually and only that multiplex is searched
for the channels. For every valid channel number,
signal level, signal quality and network name are
shown at the bottom of the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
First Time Installation
The user can use this item to load default settings,
which had been loaded to the receiver at the factory.
To install factory settings, highlight “First Time In-
stallation” menuitem and press OK button, thenyou
will be asked to tings. Selecting “Yes” by pressing OK
button while the “Yes” is highlighted and then the
existing channel table will be deleted.
Are you sure you want to delete all channels and
settings for first time installation?
Yes
No
After factory settings is loaded, “First Time Instal-
lation” menu will be displayed.
The menu which is displayed for language selection
appears on the screen at first. By using or
buttons,selectthedesiredlanguageoption,andpress
OK button to activate.
After the language is selected, a message asking for
automatic search start appears on the screen.
Do you want to start automatic search?
Yes No
Highlight “Yes” item by pressing or buttons and
press OK button to start installation. After search is
completed for digital channels, a message asking
search for analogue channels appears on the screen.
Yes
Do you want to search for
analogue channels?
No
Highlight “Yes” item bypressing or buttons and
press OK button to searh for analogue channels.The
following menu appears on the screen for analogue
channel search.
Country
Language
UK Ok
Cancel
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
TXT Language
Auto Program
By pressing or button, adjust the Country item
and press to highlight Language item. Use or
button to set Language. Use or buttons to
select TXT Language and set it by using or
buttons. Press OK button to continue.
Configuration
Press buttontodisplaytheMainMenuandthe
button twiceto highlight Configuration, then press OK
button to display the Configuration menu. Press
button to exit the menu.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
The various configuration functions are displayed in
a list, along with a quarter-screen image of the cur-
rently selected channel. You can select a function by
highlightingthecorrespondingmenulineusingthe
or buttons.

GB -17-
Configuration
Favourite Mode
Channel List
Lan
g
ua
g
e Settin
g
s
Time Settings
Receiver Upgrade
i
Change Favourite Mode More
Tv Only
V.0.7 (EU)
Off
Parental Settings

Select Mode
4
Arte
Country :
Germany

Exit
Favourite Mode
This function enables or disables the favourite chan-
nellist mode.
Use or buttons to setFavourite Mode to “List 1,
List 2,..., List 5 or Off”.
Selecting “Off” disables the favourite channel List
mode.
If the “Favourite Mode” is set on via selecting a
channel list number, in normal operating mode press-
ing P + and P - buttons will onlynavigate through the
channels that were previously defined as favourites
in the selected channel list.
Channel List
IntheConfigurationMenu,highlight theChannelList item
by pressing or buttons.
Use the or buttons to set the Channel List to
“TV only or Radio only”.
This feature enables navigation only through the se-
lected channel list type.
If “Radio only” is set, you can only navigate through
theRadiochannels inthechannel listviausing P + or
P - buttons.
Language Settings
IntheconfigurationMenu,highlighttheLanguageSet-
tings item by pressing or buttons. Press OK
andLanguageSettingssubmenuwillbedisplayedon
the screen:
Audio Language
Subtitle Language
System Language
EnglishEnglish
English
Off
Use or buttons to highlight the menu item that
will be adjusted.
System Language
System Language determines the on-screen menu
language.
Use or buttons to set the System Language
setting.
Audio Language
Digital terrestrial television channels can broadcast
simultaneous sountracks in more than one language.
This function selects which language soundtrack you
will hear when switching to a channel broadcasting
with the multiple soundtracks.
Use or buttons to cycle through the language
options.
Subtitle Language
Digital terrestrial television channels can broadcast
with subtitles displayed on-screen for the hard-of-
hearing. This function selects thedesired subtitle lan-
guage and enables the automatic display of subtitles
whenever subtitle information is broadcast.
Use or buttons to cycle through “Off” and
language options.
Parental Settings
Some channels broadcast material which you do not
want younger members of the family to watch. Any
channel can be ‘locked’ so that it cannot be selected
for viewing without first a four-digit PIN code being
entered. In this way any channel not suitable for
younger viewers can be protected.
This function enables ordisables the menuprotection
systemandallowsthePINcodetobechanged.Chan-
nelAnd Menu Protection Lock feature.
Use or buttons to highlight Parental Settings.
Press OK button to enter Parental Settings Menu. A
box asking for the lock key is displayed.
Enter Lock Key
There is only one key which is set to “0000” initially.
Enter lock key. If wrong Lock key is entered, the fol-
lowing message is displayed on the screen and it is
returned back.
Wrong Lock Key
If it is correct, the Parental Settings Menu including
following items is displayed:
Menu Lock Installation
Set Lock Key
Maturity Lock
A
ge 5
Use or buttons to highlight the menu item that
will be adjusted.
Maturity Lock:
Use or buttons to set Maturity Lock to the “Off,

GB -18-
Age 4, Age 5...........Age17 or Age 18”. (“Off, Age 4,
Age5,...,Age 18, Freigegeben ab6 Jahren,Universal
viewing (FRA) or X-rated ESP”.)
Menu Lock:
There you can set/reset locking for the Main Menu or
the Installation Menu to restrict access. If the menu
lock is disabled, there will be free access to the menu
system.
Off: All menus are unlocked.
Main Menu: Main menu is accessible only with the
correct lock key. So the user cannot add, delete, re-
name, move channels, cannot set timers.
Installation: Installation menu is locked, so the user
cannot add channels.
Changes will be updated after exiting Configuration
Menu.
Set Lock Key:
Also in this menu you can change the lock key and
set/change parental lock mode.
Time Settings
In the configuration Menu, highlight the Time Settings
item by pressing or buttons. Press OK and
TimeSettingssub menuwillbedisplayedonthescreen:
Time Zone Setting
Time Zone
Current Time
14:26
Auto
GMT +0
Use or buttons to highlight the Time Zone
Setting. Time Zone Setting is set using or but-
tons.Itcanbeset toAUTOorMANUAL. WhenAUTO
is selected, Current Time and Time Zone options will
not be available to be set.
If MANUAL option is selected as the Time Zone Set-
ting, Time Zone could be altered:
•By pressing or buttons select Time Zone.
Use or buttons to change the Time Zone be-
tweenGMT-12orGMT+12.CurrentTimeonthetopof
the menu list will then change according to the se-
lectedTimeZone.
Receiver Upgrade
TheIDTVcanbeupgradedviatheconfigurationmenu,
entered from the main menu.
Configuration
Favourite Mode
Channel List
Language Settings
Time Settings
Receiver Upgrade
i
More
Tv Only
V.0.7 (EU)
Off
Parental Settings
OK
Search for Upgrade
4
A
rte
MENU
Exit
Country : Germany
In the configuration menu, highlight the “Receiver
Upgrade” item by pressing or buttons and
press “OK” button to start upgrade process. The
following menu appears on the screen.
Software Upgrade
Searching for upgrade. Please wait, or press
MENU to cancel.
Search Progress:
After the search progress is completed, the message “
Completed searching for upgrade. No new soft-
ware was found” appears on the screen if no new
software is found.
Timers
Display the Main Menu by pressing the button.
Highlight the Timers line by pressing or but-
tons and press OK button to display the Timer menu.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
Up to five separate timer events can be set and each
is displayed in the Programme Timers screen, show-
ing the event number, the channel to be selected, the
start time, end time, date and the mode- whether that
event is active (and will be acted on) or not.

GB -19-
i
MENU
Programme Timers
No Channel Name Start End Date Mode
1. ITV 1 20:00 21:00 12/05/2005 Active
2. BBC ONE 00:00 00:00 01/01/2005 Inactive
3. BBC ONE 00:00 00:00 01/01/2005 Inactive
4. BBC ONE 00:00 00:00 01/01/2005 Inactive
5. BBC ONE 00:00 00:00 01/01/2005 Inactive
6. BBC ONE 00:00 00:00 01/01/2005 Inactive
Move/Change
Exit Edit Timer More
OK
10:42
04/07/2005
•To set anevent, highlight itsmodebutton using or
buttonsand press OKbutton todisplaythe timer
entry window.
Type:
Name:
Start:
End:
Date:
Mode:
TV
3. ITV
00:00
00:00
03/06/2005
Once
• Here the sixsettings of channel type, channel name,
start time, end time, date and frequency mode can
be set. You can move freely between each setting
using or buttons.
• The channel type is set using or buttons. It
enables displaying only the selected type channels.
• The channel name is set using or buttons to
display the channel which broadcasts the
programme.
• The start time, end time and date are each set with
thenumberbuttons ontheremotecontrol in 24-hour
format.
• The frequency mode determines how often the re-
ceiver operates this event and is set with the or
buttons to be either Once, Daily, or Weekly.
Hint
If an invalid number for the start or end times
or the date is entered, “Entered time is not
valid” message appears on the menu.
TV Setup
To be able to go through TV functions, you can use
thisitem.
The digital TV Setup menu screen is accessed from
the Main Menu. Press the button to display the
MainMenuanduse or buttonsto highlight“TV
Setup”. Press OK button to display TV Setup menu
screen.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
Detailed information for all menu items is inAnalogue
TV Menu System section.
Common Interface
• Press button to display the Main Menu and use
the or buttons to highlight the “Common
Interface” line and press OK button.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
It is required to subscribe to a pay channel company
toviewthepaychannelsoftheDigitalTerrestrialbroad-
casting. Obtain theConditionalAccessModule (CAM)
and the Viewing card by subscribing to a pay chan-
nel company, then insert those to the Television using
the following procedure.
1. Switch off the TV and unplug from the mains.
2. Insert theCAM,then ViewingCardto theslot that is
located in the terminal cover at the left-hand side
of the TV (from front view).
• The CAM should be correctly inserted, it is impos-
sible to insert fully if reversed. The CAM or the TV
terminal may be damaged if the CAM is forcefully
inserted.
3. Connect the TV to the mains supply, switch on and
then wait for few moments until the card is acti-
vated.
•SomeCAMsmayrequirethefollowingsetup.Please
set the CAM by entering the IDTV menu, Common
Interfacethenpressing OKbutton.(CAMsetupmenu
is not displayed when it is not required.)