Electrovision GH613 User manual

GH613
Watering Spike
User Manual
Please retain for future reference

IMPORTANT
Installer and users please note:
Please read the entire instruction manual before using the product and then save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
PRODUCT SAFETY
WARNING: Choking hazard. Small parts. Keep away from children and pets
Children shall not play with the unit.
Do not use the watering spike for anything other than its intended use.
USAGE INSTRUCTIONS
1. Find a compatible water bottle and fill with water
2. Attach the watering spike to the bottle in the same way you would attach the lid, screw it until it is
tight
3. Ensure the spout is pushed firmly into the watering spike
4. Insert the spike into the soil by the plant
5. Control the flow of water by adjusting the spout tap. Rotate clockwise to reduce flow and counter
clockwise to increase flow
CLEANING INSTRUCTIONS
The watering spike should be cleaned periodically and after use with warm water and mild detergent.
STORAGE INSTRUCTIONS
Clean the watering spike, rinse with clean water and allow to fully dry before storing. Store in a cool, dry
place.
SERVICE WARRANTY
Electrovision guarantees the product free from defects in materials and workmanship for a period of 1
year. Should this unit be used under conditions other than those recommended, or any attempts made to
service or modify the unit, then the warranty will be rendered void. The product you buy may sometimes
differ slightly from illustrations. This warranty is in addition to, and does not affect, your statutory rights.
If you have any problems with this product, please call our help desk on [phone].
Electrovision Ltd. Lancots Lane, Sutton, St. Helens, Merseyside, WA9 3EX
www.Electrovision.co.uk