Eleiko 3065208 User manual

ELEIKO PRESTERA
SQUAT RACK - STAINLESS
Art.no. 3065208

Read before installation and use
Safety instructions
Warning labels
List of components
Assembly instructions
Tools needed
User guide
Purpose
General instructions for use
Product specifications
Care and maintenance
Preventive maintenance and inspections
Spare parts and service
Warranty
3
3
6
7
8
8
16
16
16
16
17
17
17
17
CONTENTS

Install and use this equipment in a place where access and supervision are specifically controlled by the owner.
Be sure to install the equipment on a stable base and level the equipment properly. Eleiko recommends that all
equipment is installed by a licensed contractor or an Eleiko installer.
This equipment is intended for indoor use only.
SAFETY INSTRUCTIONS
It is the responsibility of the purchaser of ELEIKO products to instruct all users and supervising personnel on
proper usage of the equipment.
All included warnings (labels) and instructions MUST be read before the use of any Eleiko 1.
equipment. Only use the equipment as it is intended.
A user MUST get a medical examination and proper instructions before using any Eleiko 2.
equipment.
DO NOT let anyone, under any circumstances, use equipment that appears to be damaged. Do not 3.
try to repair any equipment before consulting an Eleiko technician.
DO NOT replace components of Eleiko equipment with other, none Eleiko, equipment (magnetic 4.
safety pin, frames, bars etc.). Do not improvise! If there are any doubts, consult an Eleiko
representative prior to any intervention.
DO NOT overload the equipment and DO NOT try to exceed personal strength levels. 5.
Children under the age of 14 must be supervised by an adult. 6.
DO NOT remove any safety labels from the Eleiko equipment. Eleiko is not responsible if a label is 7.
removed. Replace damaged labels immediately.
Eleiko packaging for products an be made of wood. Be aware of splinters! You MUST use 8.
protective gloves and proper work wear.
Eleiko packaging material could be a risk when handling. Be aware of crushing! You MUST use 9.
work wear including protective gloves and hard shoes.
Eleiko products and packing material are heavy, You MUST use proper lifting techniques, work 10.
wear and hard shoes.
- 3 -
READ BEFORE
INSTALLATION AND USE

- 4 -
THIS PRODUCT IS A PART OF ELEIKO
POWERLIFTING TRAINING STATION
Art.no. 3065160

ELEIKO PRESTERA SQUAT RACK - STAINLESS
ELEIKO POWERLIFTING TRAINING PLATFORM - 3x2m
ELEIKO PRESTERA SPOTTER ATTACHMENT
ELEIKO FLAT BENCH
ELEIKO PRESTERA MAGNETIC PIN SAFETY ARMS ELEIKO PRESTERA J-CUPS WITH ROLLERS
IF YOU HAVE PURCHASED THE ENTIRE
POWERLIFTING TRAINING STATION,
ASSEMBLE THE PRODUCTS IN THE
FOLLOWING ORDER:
1 2
3 4
5 6
- 5 -

- 6 -
WARNING LABELS

2001477
2x
1x
2001478
2x
2001373
2x
2001522
2x
2001379
6x
2001421
2x
M16x100
2001385-L110
2x
2001475
2x
M16x100
2001385-L100
- 7 -
6x
Art.no
DIN Pro bold 18
DIN Pro 11
Screw kit 2001382
LIST OF COMPONENTS

1,5 1,5
1,5 0,6
WRENCH
24 mm
SOCKET WRENCH
24 mm
- 8 -
Before assembly, make sure you have enough
clearance on all sides of the equipment, not less
than 0,6 meters. Take in account the accessibility
to remove and replace bar and weights.
TOOLS NEEDED
You need the following tools to assemble the equipment.
NOTE: Do not use electric power tools for assembly.
ASSEMBLY INSTRUCTIONS

- 9 -
This product needs to be bolted to ground. See last page of assembly instructions.
Make sure to use right fasteners, depending on floor type.
BOLT TO GROUND

PREPARATION
- 10 -

1x
2001522
1x
2001373
1x
2001475
1.
- 11 -

1x
2001478 2001477
1x
1x
M16x110
3x
2001421
1x
2001379
M16 x 110
M16 x 100
1x
M16x100
2.
- 12 -
LOOSE SCREWS!

1x
2001522
1x
2001373
1x
2001475
3.
- 13 -

2001477
1x
1x
M16x110
3x
2001421
1x
2001379
M16 x 110 M16 x 100
1x
M16x100
4.
- 14 -
LOOSE SCREWS!

5.
- 15 -
TIGHTEN ALL SCREWS!

1212
1072
1303
1908
774
- 16 -
PURPOSE
Multi-purpose rack for squats, presses and more. Compatible with several different
attachments.
GENERAL INSTRUCTIONS FOR USE
Add attachment for the selected exercise
. 1.
Follow instructions for that specific attachment. 2.
500 kg / 1102 lbs
50 kg / 110 lbs
1303 x 1212 x 1908 mm
51,3 x 47,7 x 75,1 "
PRODUCT SPECIFICATION
Max training weight
Product weight
Dimensions (L x W x H)
USER GUIDE

- 17 -
PREVENTIVE MAINTENANCE AND INSPECTIONS
NOTE: The safety level of the equipment can only be maintained if it is examined regularly for damage and wear.
Regularly:
· Clean surfaces on the frames and tubes from dust and dirt.
· Check that all bolts between parts, walls and floors are properly tightened, according to
recommendations.
· Check equipment for sharp edges. Replace parts with sharp edges.
· Check equipment structural frames and welds to ensure they are free from cracks, irregularities or any
other abnormalities. If in doubt, consult an Eleiko representative before product use.
Cleaning and Care:
· Apply a mild soap detergent to a lint free cloth, then wipe down product surface.
· While it is safe to use an alcohol-based neutral pH7 solution on surface-treated steel elements of the
benches and racks, take care to avoid pads and cushions.
· We recommend alcohol-free, bleach-free, and o-phenylphenol (OPP) ammonia-free wipes.
See also www.eleiko.com.
SPARE PARTS AND SERVICE
Contact Eleiko for spare parts and service:
Eleiko Group AB | Klastorpsvägen 18 | SE-302 62 HALMSTAD | Sweden
E-mail: [email protected] | Phone: [phone]
www.eleiko.com
WARRANTY
All products manufactured by ELEIKO are warranted to the original purchaser to be free from defects in
workmanship and / or materials under normal use or service as follows:
· 10 years on structural frame welds (NOT on moving parts).
· 1 year on wear and tear parts.
Normal wear and tear do not fall under the 10-year warranty.
CARE AND MAINTENANCE

Eleiko Group AB | Klastorpsvägen 18 | SE-302 62 HALMSTAD | Sweden
E-mail: [email protected] | Phone: [phone]
www.eleiko.com
rev. 2203