Eleiko PRESTERA 3085461 User manual

ELEIKO PRESTERA
HALF RACK
Art.no. 3085461, 3085456

Read before installation and use
Safety instructions
Warning labels
List of components
Assembly instructions
Tools needed
User guide
Purpose
General instructions for use
Product specifications
Care and maintenance
Preventive maintenance and inspections
Spare parts and service
Warranty
4
4
5
6
8
8
21
21
21
21
22
22
22
22
CONTENTS

Install and use this equipment in a place where access and supervision are specifically controlled by the owner.
Be sure to install the equipment on a stable base and level the equipment properly. Eleiko recommends that all
equipment is secured to floor and installed by a licensed contractor or an Eleiko installer.
This equipment is intended for indoor use only.
SAFETY INSTRUCTIONS
It is the responsibility of the purchaser of ELEIKO products to instruct all users and supervising personnel on
proper usage of the equipment.
All included warnings (labels) and instructions MUST be read before the use of any Eleiko 1.
equipment. Only use the equipment as it is intended.
A user MUST get a medical examination and proper instructions before using any Eleiko 2.
equipment.
DO NOT let anyone, under any circumstances, use equipment that appears to be damaged. Do not 3.
try to repair any equipment before consulting an Eleiko technician.
DO NOT replace components of Eleiko equipment with other, none Eleiko, equipment (magnetic 4.
safety pin, frames, bars etc.). Do not improvise! If there are any doubts, consult an Eleiko
representative prior to any intervention.
DO NOT overload the equipment and DO NOT try to exceed personal strength levels. 5.
Children under the age of 14 must be supervised by an adult. 6.
DO NOT remove any safety labels from the Eleiko equipment. Eleiko is not responsible if a label is 7.
removed. Replace damaged labels immediately.
Eleiko packaging for products an be made of wood. Be aware of splinters! You MUST use 8.
protective gloves and proper work wear.
Eleiko packaging material could be a risk when handling. Be aware of crushing! You MUST use 9.
work wear including protective gloves and hard shoes.
Eleiko products and packing material are heavy, You MUST use proper lifting techniques, work 10.
wear and hard shoes.
- 4 -
READ BEFORE
INSTALLATION AND USE

- 5 -
WARNING LABELS

4x
2001373
2x
2001302
2x
2001257
1x
2001294
2x
2001299
1x
2001310
2x
2001317
2x
2001320
M16x110
2001385-L110
8x
16x
2001379
32x
2001421
M16x100
10x
2001385-L100
2001374
2x
or
Half Rack
3085456
Half Rack
3085461
- 6 -
Screw kit 2001386
LIST OF COMPONENTS

1,5 1,5
1,5 0,6
- 7 -
Before assembly, make sure you have enough
clearance on all sides of the equipment, not less
than 0,6 meter. Take in account the accessibility to
remove and replace bar and weights.
TOOLS NEEDED
You need the following tools to assemble the equipment.
NOTE: Do not use electric power tools for assembly.
Socket wrench
24 mm
Wrench
24 mm
ASSEMBLY INSTRUCTIONS

M16x100
M16x110
PREPARATION
- 8 -

1x
2001373
1x
2001320
1.
- 9 -

1x
2001310
1x
2001317
M16x110
2x 2x
2001379
4x
2001421
LOOSE SCREWS!
2.
- 10 -

1x
2001373
1x
2001257 / 2001374
3.
- 11 -

1x
2001379
3x
2001421
1x
2001302
M16x110
M16x100
M16x110
1x
M16x100
1x
4.
- 12 -
LOOSE SCREWS!

1x
2001373
1x
2001320
5.
- 13 -

M16x110
2x 2x
2001379
4x
2001421
1x
2001317
6.
- 14 -
LOOSE SCREWS!

1x
2001373
1x
2001257 / 2001374
7.
- 15 -

1x
2001379
3x
2001421
1x
2001302
M16x100
M16x110
M16x110
1x
M16x100
1x
8.
- 16 -
LOOSE SCREWS!

9.
- 17 -
If purschased J-cup and Safety arm on
sled, assemble them now.
15

4x
2001379
8x
2001421
K
1x
2001294
M16x100
4x
10.
- 18 -

6x
2001379
12x
2001421
M16x100
6x
2x
2001299
11.
- 19 -

12.
- 20 -
TOP VIEW
TIGHTEN ALL
SCREWS!