Element ELCHS371 User manual

USER’S MANUAL
English
French
Spanish
ELCHS371
ELDHS421
PART NO. IES080547
Before using the TV, please read this manual thoroughly,
andretainitforfuturereference.

SAFETY CLASS :This is an IEC safety class I product and it must be grounded for safety.
CONTENTS
1
Important Safety Instructions
Basic operation
Appendix
....................................................................................................2
...........................................................................................4
..............................................................................................................4
........................................................................................................4
.............................................................................4
.............................................................................5
.................................................................................................6
......................................................................................................6
......................................................................................6
......................................................................................7
.....................................................................................8
.....................................................................................9
...................................................................................................................10
.........................................................................................................10
.................................................................................................10
...............................................................................................................................10
.............................................................................10
......................................................................................................................11
r.................................................................................................................11
.......................................................................................................................11
.........................................................................................12
..............................................................................................................13
...................................................................................
.......................................................................................
.................................................................................................
...................................................................................................................................
............................................................................................................................
............................................................................................................
............................................................................................................
...............................................................................................................................................
............................................................................................................................
.....................................................................................................................................22
................................................................................................................................................22
.......................................................................................................................22
...........................................................................................................................
................................................................................................................................
Preparation for using your new TV
Using the remote control
Learning about your TV
Selecting a location for the TV
Connection to other devices
Menu operation
Video mode adjustment
Audio mode adjustment
Setup
Parental control
TV settings
Cleaning and care
Base installation instruction
Troubleshooting
Specifications
View the front panel control
View the back connection panel (ELCHS371)
View the back connection panel (ELDHS421)
The side panel connection (ELCHS371)
The side panel connection (ELDHS421)
The Back panel connection (ELCHS371)
The Back panel connection (ELDHS421)
Connecting your TV
Connecting to an antenna
Service jack
Connecting component devices (DVD/PVR)
Connecting HDMI
Connecting compute
Connecting audio
Connecting to a cable converter box
13
14
15
15
15
18
18
19
20
..........................................................................................23
24
25
Connecting to A/V equipments
Preparing the remote control for use
Learning about the remote control
Understanding the TV features

CAUTION
CAUTION: TO REDUCE THE RISK OF AN ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK).
THERE ARE NO USER SERVICEABLE PARTS
INSIDE. FOR ANY REQUIRED SERVICING,
PLEASE CONTACT QUALIFIED SERVICE
PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash symbol with an arrowhead inside a
triangle alerts the user about an uninsulated dangerous
voltage that may be of sufficient magnitude to constitute a
risk of electric shock.
Theflashwiththesymbolofanexclamationpoint
inside a triangle alerts the user about important
operating and maintenance instructions related to
the product.
CAUTION:
WARNING:
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE WITH THE FCC RULES COULD VOID THE USERS
AUTHORITY TO OPERATE THIS EQUIPMENT.
TOPREVENTFIREORSHOCKHAZARD,DONOTEXPOSETHISAPPLIANCETORAINOR
MOISTURE.
Important safety instructions
12. Useonlywithcart,stand,tripod,bracket,ortablespecifiedbythemanufacturerorsold withtheapparatus.
Whenacartisused,usecautionwhenmovingthecart/apparatuscombinationto
avoid injury from tip-over.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Read these instructions
Keep these instructions
Heed all warnings
Follow all instructions
Do not use this apparatus near water
Cleanonlywithdrycloth
Do not block any ventilation openings
Donotinstallnearanyheatsources
Donotdefeatthesafetypurposeofthepolarizedorgrounding-typeplug
Protect the power cord from being damaged particularly at plugs, convenience receptacles, and at points in
which they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
13.
14.
Unplug this apparatus during lightning storms or when unused for long periods of
time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as when the power-supply cord or
plug is damaged, when liquid has been spilled or when objects have fallen into the
apparatus, or when the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped. S3126A
2

ANTENNA LEAD
IN WIRE
ANTENNA
DISCHARGE UNIT
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
ELECTRIC
SERVICE
EQUIPMENT
GROUND
CLAMP
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
FIGURE A
S2898A
GROUNDING WIRES
Important safety instructions
15.
27.
POWER SOURCE
16. POWER CORD PROTECTION
17. OUTDOOR ANTENNA GROUNDING
18. LIGHTNING:
19. POWER LINES:
20. OVERLOADING:
21. OBJECT AND LIQUID ENTRY:
22. SERVICING:
23. REPLACEMENT PARTS:
24. SAFETY CHECK:
25
26. WARNING:
:ThisTVshouldbeoperatedonlyfromthetypeofpowersourceindicatedonthemarking
label.Ifyouarenotsureofthetypeofpowersupplytoyourhome,consultyourappliancedealerorlocal
powercompany.ForTVsintendedtooperatefrombatterypower,orothersources,refertotheoperating
instructions.
:Power-supplycordsshouldberoutedsothattheyarenotlikelytobewalked
on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the appliance.
:IfanoutsideantennaorcablesystemisconnectedtotheTV,besure
the antenna or cable system is grounded to provide
some protection against voltage surges and built-up
static charges. Section 810 of the National Electrical
Code, ANSI/NFPA NO.70,provides information with
respect to proper grounding of the mast and supporting
structure,groundingofthelead-inwiretoanantenna
discharge unit , size of grounding conductors, location
of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode. (Fig.A)
For added protection for this TV receiver
duringalightningstorm,orwhenitisleftunattended andunusedforlongperiodsoftime,unplugitfromthe
wall outlet and disconnect the antenna or cable system.
This will prevent damage to the TV due to lightning and power line surges.
An outside antenna system should not be located in the vicinity of overhead power lines, or
other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric
shock.
NeverpushobjectsofanykindintothisTVthroughopeningsastheymay
touchdangerousvoltagepointsorshortoutparts thatcouldresultinfireorelectricshock.Neverspillliquid
of any kind into the TV.
Do not attempt to service this TV yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
When replacement parts are required, be sure that the service technician uses
replacement parts with the same characteristics as the original parts specified by the manufacturer.
Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.
Upon completion of any service or repairs to this TV, ask the service technician to perform
routine safety checks to determine that the TV is in proper operating condition.
. The apparatus should not be exposed to any dripping or splashing, and no objects filled with liquids (such as a
vase) should be placed on the apparatus.
Plugthepowercordintoapoweroutletwhereaccesstoapowercordconnectorisreadily
accessible, in case if the power needs to be immediately disconnected.
ATTENTION: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
3

Preparation for using your new TV
Menu
Input selection
Volume Up
Volume Down
Channel Up
Channel Down
Power (Standby)
Power indicator
Remote receiver
INPUT
Learning about your TV
YoucanoperateyourTVviathebuttonsinthefrontcabinetortheremotecontrol.Theterminalsinthe
back cabinet provide all the connections from other equipments to your TV.
View the front connection panel
View the back connection panel (ELCHS371)
Power Input
LR
VIDEO
S-VIDEO HEADPHONE
COAXIAL
IN
4
R
COMP1
YL
PR
PB
HDMI2 HDMI1
COMP2
SERVICE
YP P L R
BR
OUT
VIDEO L R
VGA
VGA AUDIO IN

Preparation for using your new TV
5
View the back connection panel (ELDHS421)
HDMI3 HDMI2
COMP2
VIDEO L R
AV2
OUT
SERVICE
R
VIDEO L R
COMP1 YP PL R
BR
YP P LBR
VGA VGA
AUDIO IN
AV1
LR
VIDEO
S-VIDEO HEADPHONE OPTICAL
HDMI1
Power Input
Connection to other devices

Preparation for using your new TV
6
LR
VIDEO
S-VIDEO HEADPHONE
COAXIAL
IN
COAXIAL
The equipment with AV or S-Video
output function ( such as VCD, DVD,
set-top boxes, etc.).
S-VIDEO
Audio L
Video
Audio R Red
White
Yellow
Connection to other devices
SelectingalocationfortheTV
1. Place the TV on an open bench in a location where light does not directly hit the screen.
2. Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause
overheating, which may damage the TV.
Please contact a local dealer for wall mounting.NOTE:
The side panel connection (ELCHS371)

Preparation for using your new TV
7
AV1
LR
VIDEO
S-VIDEO HEADPHONE OPTICAL
HDMI1
The equipment with AV or S-Video output function
( such as VCD, DVD, set-top boxes, etc.).
S-VIDEO
Audio L
Video
Audio R Red
White
Yellow
The equipment with HDMI output jack
( such as DVD players, set-top boxes, etc.).
VOL
OK
The side panel connection (ELDHS421)
COAXIAL

Preparation for using your new TV
8
The back panel connection (ELCHS371)
R
COMP1
YL
PR
PB
VGA
VGA AUDIO IN
HDMI2 HDMI1
COMP2
SERVICE
YP PL R
BR
OUT
VIDEO L R
The equipment with HDMI output jack
( such as DVD players, set-top boxes, etc.).
OR
Update jack
Y
PC
B/B
PC
R/
Audio L
Audio L
Video
Audio R
Audio R Red
Red
Red
White
White
Yellow
Blue
Green
DVD With Component jacks
VIDEO RECORDER
Computer

Preparation for using your new TV
9
The back panel connection (ELDHS421)
DVD With Component jacks
VGA VGA
AUDIO IN
HDMI3 HDMI2
COMP2
VIDEO L R
AV2
OUT
SERVICE
R
VIDEO L R
COMP1 YP P LR
BR
YP P LBR
OR
OR
Y
PC
B/B
PC
R/
Audio L
Audio L
Audio L
Video
Video
Audio R
Audio R
Audio R Red
Red
Red
Red
White
White
White
Yellow
Yellow
Blue
Green
The equipment with HDMI output jack
( such as DVD players, set-top boxes, etc.).
Update jack
Computer
Video Recorder
OK
VOL
The equipment with AV output function (
such as VCD, DVD, set-top boxes, etc.).

Preparation for using your new TV
10
Connecting your TV
Connecting to an antenna
Caution: Do not plug in the TV until you have finished connecting all of your equipments.
Toenjoythetelevisonprogram transmittedbyyourlocalTVstation,youneedanindoororoutdoor
antenna (not supplied). An outdoor antenna is necessary for a perfect picture quality. If you are a
subscriber of your local CATV net, the outdoor or indoor antenna is not needed. Connect the equipments
as shown below.
Connecting to A/V equipments
To enjoy the multimedia features, you can connect your TV to A/V equipments such as VCD, DVD, STB,
Satellite receiver, Camcorder, Audio amplifier etc., and select signal source using your remote control.
Connect RCA audio cables to “R -AUDIO - L” on the rear of your set and the other ends to corresponding
audio out connectors on the A/V device.
1. Headphones are not included.
2. No sound will be heard from the main unit speakers when a headphone mini-plug is
connected into the headphone jack.
Connector for service only (do not connect any equipment here).
Connect Component video and audio cables to Component inputs (“PR/CR”, “PB/CB”, “Y”) on the rear of your set
and the other ends to corresponding component video out connectors on the PVR or DVD.
NOTE:
Service jack
Connecting component devices (DVD/PVR)
1.2.3.
AV1
LR
VIDEO
S-VIDEO HEADPHONE OPTICAL
HDMI1
ELCHS371
ELDHS421
LR
VIDEO
S-VIDEO HEADPHONE
COAXIAL
IN

Preparation for using your new TV
11
The Y, PB/CB and PR/CR” connectors on your component devices (PVR or DVD) are sometimes labeled Y, B-Y and R-Y
or Y, CB and CR (Colors for inputs and cables must correspond to both devices).
NOTE Some devices such as a PVR or DVD players require ’Component/YPBPR’ signal to be set via output in the
devices settings. Please consult your device user manual for instructions
Supports digital connections between HDMI - enabled AV devices such as (PVRs, DVD, BluRay, HDDVD, AV receivers
and digital devices). No sound connection is needed for an HDMI to HDMI connection.
NOTE: Some devices such as a PVR or DVD players require a HDMI signal to be set via the output in the devices’
settings. Please consult your device user manual for instructions.
What is HDMI?
HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital
audio and video signals using a single cable without compression.
“Multimedia interface” is a more accurate name for it especially because it allows multiple channels of digital audio
(5.1 channels).The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High
Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.
Use the HDMI terminal for HDMI connection to a compatible device.
If your external device has DVI only, you should use a DVI-to-HDMI cable( or adapter) for the connection, and the “R
-AUDIO-L” terminal on DVI for sound output.
Connect the D- Sub cable to “VGA (VGA IN)” on the rear of your set and the other end to the Video Card of your
computer.
Connect the stereo audio cable to “VGA AUDIO IN” on the rear of your set and the other end to “Audio Out” of the
sound card on your computer.
This device may not be compatible with all PC video/graphic cards
Connect RCA audio cables to “R -AUDIO - L” on the rear of your set and the other ends to corresponding
audio in connectors on the Amplifier or DVD Home Theater.
.
:
.
.
Connecting HDMI
Connecting computer
Connecting audio

Preparation for using your new TV
12
Connecting to a cable converter box
This television has an extended tuning range and can tune most cable channels without using a cable converter
box. Some cable companies offer premium pay channels in which the signal is scrambled. Descrambling these
signals for normal viewing requires the use of a descrambler device which is generally provided by the cable
company.
For basic cable service not requiring a Converter/Descrambler box, connect the CATV 75 ohm Coaxial Cable
directly into the Antenna Jack on the back of the television.
If you subscribe to a cable service which requires the use of a Converter/Descrambler box, connect the incoming
cable to the Converter/Descrambler box and connect the output of the box to the Antenna Jack on the back of
the television. Follow the connections as shown below. Set the television to the output of the
Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to select channels.
If you subscribe to a cable service in which basic cable channels are unscrambled and premium channels require
the use of a Converter/Descrambled box, you may wish to use a two-set signal splitter (sometimes referred to
as a two-set coupler) and an A/B Switch box from the cable installer or an electronics supply store. Follow the
connections shown below. With the switch in the B position, you can directly tune any unscrambled channels on
your TV. With the switch in the A position, you can tune your TV to the output of the Converter/Descrambler box
(usually channel 3 or 4) and use the box to tune scrambled channels.
WhenyouuseaconverterboxwithyourTV,theremaybefeaturesthatyoucannot
programwhenusingtheremotecontrol.
?
?
?
For subscribers to basic cable TV service
For subscribers to scrambled cable TV service
For subscribers to unscrambled basic cable with scrambled premium channels
Note:
Converter/Descrambler
Converter/Descrambler
Splitter A/B Switch
ANT 75Ω

13
Preparing the remote control for use
Installing the remote control batteries
1.Openthebatterycoveronthebackoftheremotecontrol.
2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the
battery compartment.
3. Close the battery cover.
Note:
1.Dispose of your batteries in a designated disposal area. Do not throw batteries into fire.
2.Do not mix battery types or combine used batteries with new ones.
3.Remove dead batteries immediately to prevent battery acid from leaking into the battery
compartment.
4.Ifyoudonot usetheremotecontrolforalongtime,removethebatteries.
5.The effective range of the remote control is demonstrated by the following figure:
Using the remote control
8m
6m 6m
30
30
8m
15
15
6m
6m

14
4
23
56
789
0
1
INPUT
ZOOM
MUTE
PICTUREPICTURE
ENTER
AUDIO
TIME
CCD
SLEEP
MTS SAP/MTS SAP/
CH-CH-
LASTLAST
GUIDE
DISPLAY
EXIT
MENU
CH+CH+
VOL-
VOL+
Learning about the remote control
Using the remote control
INPUT: Switch among TV, Video, S-Video,
Component,HDMI and VGA
AUDIO: Select the sound mode
GUIDE: ATSC tuners feature the Electronic
Program Guide (EPG) function
DISPLAY: Display current Status
information
EXIT: On Screen Display (OSD) menu exit
MENU: Call up the main menu
OSD menu Right arrow
ENTER: Confirm selected function or
return to the previous menu
OSD menu Up arrow
OSD menu Left arrow
OSD menu Down arrow
CH+: Channel up
CH-: Channel down
LAST:Return to previous channel
CCD: Closed caption decoder function
VOL+: Volume up
EN-21645E
VOL-: Volume down
SLEEP: Set the sleep timer
MTS/SAP: Multi-channel television
sound selection
Select digital channels
Select TV channels
PICTURE: Select the picture mode
Mute: Mute the sound
Power ON/OFF
TIME: Display the current time
Power indicator
ZOOM: Select Screen Mode
Electronic Program Guide (EPG) function:
After pressing the "GUIDE" button in the
digital TV channel option, the 4 same color
buttons will appear with explanations in the
OSD. Follow the steps illustrated in the OSD.

15
Understanding the TV features
l
l
l
l
l
l
l
l
Basic operation
Power ON/OFF
Signal source selection
Select channels
Use [Mute] button
Select picture modes
Select sound modes
Select zoom modes
1. Connect the TV to a power outlet. If the power indicator is red, it means that the TV is switched off. Press the
Power button on the front control or on the remote control to switch on the TV. Once the Power button is
switched on, the power indicator will be displayed as blue. Several seconds later, the TV picture will be
displayed on the screen.
2. Press the Power button on the front control or on the remote control to turn the TV off temporarily.
3. Always remove the AC power plug from the outlet when not using this TV for a long period of time.
Please use [ ] to select channels. ndicates channel number up;
indicates channel number down. Press button on the side panel of the TV to select the
channels. If you want to choose any of the skipped channels, press the number directly.
Press the [ ] button to mute the sound. Press the [Mute] button again to resume the sound.
Press the [ ] button to select the picture mode from four options: Standard, Movie, User and Vivid. You
can adjust the picture mode based upon your personal preference.
Press the [ ] button to select sound modes from Standard, Speech, User, and Music.
Press the [ZOOM] button to select the aspect ratio between picture width and picture height (High Definition 16:9
pictures will be displayed in original format 16:9, named Wide).The options for SD (Standard Definition 4:3) are
Normal, Wide, Cinema.
CH+/CH- CH+
CH- [CH /Ch ]
Mute
PICTURE
AUDIO
pq
Zoom and
Multimedia - All in one TV receiver, Video Monitor and PC display.
Wider viewing angle for 16:9 and 4:3 display screens - over a 160 degree viewing angle and a
16:9 ergonomic display panel.
Digital display device - Irrespective of magnetic or geomagnetic effects, this device accurately
reproduces images without any distortion or blur.
Closed caption decoder - You may view specially labeled (cc) TV programs, movies, news,
prerecorded tapes, etc. with either a dialogue caption or text display added to the program.
V-chip - Enables parents to prevent their children from watching inappropriate programs on TV.
ATSC/NTSC
Sleep timer
Multi-language OSD
Press the [ ] button to select TV, AV, S-Video,Component,VGA and HDMI inputs. There are two ways to
select the source: One is to press the [ ] button continuously, while the other is to use the and
buttons to confirm the source.
button on the remote panel [ ] i
[]
INPUT
INPUT [ARROW]
[ENTER]
Menu operation

Basic operation
Normal
The original 4:3 aspect ratio (1.33:1 signal)
is preserved, so black bars are added to the
left and right of the image. Standard TV
broadcasts are displayed with a 4:3 aspect ratio.
Wide
When watching a standard broadcast or full-frame
movie in this mode, the display image is stretched
proportionately to fill the TV screen.
When watching a widescreen (1.78:1 signal)
program or movie, the display image fills the TV
screen.
Zoom
Stretches the 4:3 aspect ratio image vertically
and horizontally to fill the screen at 1:1.78
aspect ratio.
16
Cinema
Stretches the 4:3 aspect ratio image vertically
and horizontally to fill the screen at 1:2.35
aspect ratio.

17
Use [GUIDE] button
Use [DISPLAY] button
Use [EXIT] button
Select channels by numbers
Use [MENU] button
Use [LAST] button
Use [ENTER] button
Adjust volume
Use [CCD] button
Use [MTS/SAP] button
Use [SLEEP] button
Use [TIME] button
Press the [ ] button to display features of the ATSC program and the EPG function.
Press the [ ] button to view current source information.
Press the [ ] button to exit the OSD menu.
To select a channel: Press the channel number you would like to go to. For example, to select channel number 120,
press buttons 1, 2 and 0, respectively.
Press the [MENU] button to display the TV OSD menu.
Press the [LAST] button to return to the previous channel.
Press the [ENTER] button to select a particular item.
Press button to adjust the volume.
Press the [ ] button to change the CCD mode. Using this button will set the Closed Caption mode when viewing
a DTV or TV channel.
: To set the default Closed Caption setting for all channels see Section 3.3.6, Closed Caption for DTV. For DTV
the options are CC1, CC2, CC3, CC4, Service1 or Service2. For TV and AV, the options are On or Off. Additionally,
this button stops the CD, DVD or VCR when the component is activated with the remote control.
Press the [ ] button to change the sound mode (Mono, Stereo, SAP). This button will select the MTS
options of Stereo, SAP, or Mono in TV mode, alternate audio channels, and when available, in DTV mode.
Press the [ ] button repeatedly to set the sleep time, which can be set to: 5 Mins, 10 Mins, 15 Mins, 30 Mins,
45 Mins, 60 Mins, 90 Mins, 120 Mins, 180 Mins, 240 Mins, and Off.
Press the [ ] button to obtain the current time.
GUIDE
DISPLAY
EXIT
[VOL+/VOL-]
CCD
Note
MTS/SAP
SLEEP
TIME
Basic operation

18
Video mode adjustment
Audio mode adjustment
1. Press to open the OSD option
2. Press or to highlight Video, then press to enter the Video menu.
3. Press or to highlight an option, then press or to adjust the option. You can adjust:
- Adjusts the Picture Mode. You can select Standard, Movie, User, or Vivid.
- You can increase or decrease the brightness of the picture. Increasing the brightness can add
more light to dark areas of the picture, while decreasing the brightness can add more darkness to light
areas of the picture.
- You can increase or decrease the contrast of the picture. Increase the contrast to adjust the
white areas of the picture or decrease the contrast to adjust the black areas of the picture.
- Adjusts the intensity of the colors.
- Adjusts the overall color of the picture.
- You can increase the sharpness level for clearer images or decrease the sharpness level for
smoother images.
- Changes the color temperature. You can select the color temperature from three
options: Cool, Standard or Warm.
- Accesses advanced video settings such as DNR, Black Level, Extender, White Peak
Limiter and Flesh Tone.
1. Press to open the OSD option
2. Press or to highlight , then press to enter the menu.
3. Press or to highlight an option, then press or to adjust the option. You can adjust:
MENU
Picture Mode
Brightness
Contrast
Saturation
HUE
Sharpness
Color temperature
Advanced Video
MENU
Audio Audio
pq u
pq tu
pq u
pq tu
?
?
?
?
?
?
?
?
Video
Picture Mode User
Contrast
Saturation
HUE
Sharpness 6
Color Temperature Cool
Advanced Video
Brightness 50
50
50
0
: Select Adjust : Back
ENTER Enter Select EXIT Exit
Audio
Setup
Parental
Audio Mode Standard
Balance 0
Bass 50
Treble 50
Sound Surround On
SPDIF Type PCM
Auto Volume Control On
Audio
0
Equalizer
Auto Volume Control Off
SPDIF Type PCM
Sound Surround Off
: Select Adjust : Back
Balance
Basic operation

19
?
?
?
?
?
?
?
?
?
?
Balance
Sound Surround
Auto Volume Control
SPDIF Type
Note
MENU
Setup Setup
OSD Language -
Screen Mode -
DPMS -
Time Setup -
Caption
Analog Closed Caption
Digital Closed Caption
Digital Caption Style
Reset Default -
- Adjusts the volume of the left and right speakers.
-Turns the surround sound effect on or off.
- Turns automatic volume control on or off. The option keeps the audio in a
preset range to eliminate large spikes in volume.
-Selects the SPDIF type. You can select PCM, Dolby Digital, or Off.
: Via SPDIF Type, you can choose the optical digital audio out type. If Audio Volume Control is On,
that means audio out control is activated.
1. Press to open the OSD option
2. Press or to highlight , then press to enter the menu.
3. Press or to highlight an option, then press or to adjust the option. You can adjust:
Use the right or left arrow button to choose the OSD Language among English, Spanish
and French.
Use the arrow button to choose the aspect ratio between picture width and picture height
(High Definition 16:9 pictures will be displayed in original format 16:9, named Wide).The options for SD
(Standard Definition 4:3) are Normal, Wide, Zoom and Cinema.
This is a good function for a computer monitor. When DPMS is on, the computer will control the
screen on or off. For example, if the computer is in sleep mode, the screen will be switched off. If the
computer is activated, the screen also is activated.
You can set up the exact time by yourself. You can also set up Sleeper Time and Auto Sleep
Time.
: There are three items in it - Analog Closed Caption, Digital Closed Caption and Digital Caption
Style.
:
: Service1, Service2, Service3, Service4, Service5, Service6.
: There are two Caption Styles. One is the automatic function set as the
broadcaster, while the other is the custom style where you can adjust the font size, color,
opacity, background color etc., accordingly.
Every TV has its original setting before leaving the factory. So this function helps you
restore these settings.
Setup
pq u
pq tu
CC1, CC2, CC3, CC4, TEXT1,TEXT2, TEXT3, TEXT4.
Equalizer-You can select the frequency you want to adjust and change its value.
Sutup
OSD Language English
Screen Mode Normal
DPMS ON
Time Setup
Caption
Reset Default
ENTER Enter Select
OSD Language English
Screen Mode Wide
On
Time Setup
Caption
Reset Default
DPMS
: Select
Setup
ENTER : Enter EXIT: Exit
Basic operation