Element ELEFT222 User manual

ELEFT222
INSTRUCTION MANUAL
Please read all the instructions carefully before using this TV,
and keep the manual for future reference.
22" FHD Digital LED TV

1
Important Safety Instructions 2
Additional Safety Information
Preparations
What is Included
Front / Rear View
Wall Mounting
Remote Control
Connecting External Devices
Operating Your TV
Turn On/Off Your TV
Setup Wizard
Selecting the Input Source
Channel Selection
Volume Adjustment
Customizing TV Settings
Navigating the On-screen Display
Picture Settings
Audio Settings
Time Settings
Setup Menu
Lock Settings
Parental Control
Channel Settings
USB Multimedia
Viewing Pictures
FCC Notes
Specifications
CONTENTS
25
4
5
10
11
13
22
22
25
Troubleshooting

• Read these instructions All the safety –
and operating instructions should be read
before this product is operated.
• Keep these instructions –The safety and
operating instructions should be retained for
future reference.
• Heed all warnings All warnings on the –
appliance and in the operating instructions
should be adhered to.
• Follow all instructions All operating and –
use instructions should be followed.
• Do not use this apparatus near water
–The appliance should not be used near
water or moisture for example, in a wet –
basement or near a swimming pool, and the
like.
• Clean only with dry cloth.
• Do not block any ventilation openings.
Install in accordance with the manufacturer’
instructions.
• Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
• Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than
the other. A grounding-type plug has two
blades and a third grounding prong. The
wide blade or the third prong are provided
for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
• Only use attachments/accessories specified
by the manufacturer.
• Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
• Unplug this apparatus during lightning
storms or when unused for long periods of
time.
• Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as the power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
• Please keep the unit in a well-ventilated
environment.
WARNING: To reduce the risk of fire or electric
WARNING: The batteries shall not be exposed
to excessive heat such as sunshine, fire or the
like.
WA R N I N G : The AC/D C a da p to r i s u sed
WARNING: To reduce the risk of electric shock,
do not remove cover (or back) as there are no
user-serviceable parts inside. Refer servicing to
qualified personnel.
This lightning flash with arrowhead symbol
within an equilateral triangle is intended
to alert the user to the presence of non-
insulated
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the p resence of important o perating
and maintenance instructions in the literature
accompanying the appliance.
This equipment is a Class II or double insulated
electrical appliance. It has been designed in such a
way that it does not require a safety connection to
electrical earth.
This product meets ENERGY STAR®
guidelines for energy efficiency. ENERGY
STAR and the ENERGY STAR mark are
registered U.S. marks. ENERGY STAR
is a registered mark owned by the U.S.
government.
s
within the product’
“dangerous voltage”
2
IMPORTANT SAFETY INSTRUCTIONS
s
shock, do not expose this apparatus to rain or
moisture. The AC/DC adaptor and apparatus
shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as
vases, shall be placed on the AC/DC adaptor
and apparatus.
as disconnect device.The AC/DC adaptor
of apparatus should not be obstructed OR should
be easily accessed during intended used.To be
completely disconnect the power input, the AC/DC
adaptor of apparatus shall be disconnected from
the mains.
• Caution Marking and rating plate was
located at bottom enclosure of the
apparatus.
• Excessive sound pressure from
earphones and headphone can cause
hearing loss.

AVERTISSEMENT: Avertissement: pour réduire
le risque d’incendie ou de choc électrique, ne pas
exposer cet appareil sous la pluie et l’humidité.
ne doit pas être exposé aux écoulements ou aux
éclaboussures et aucun objet ne contenant de liquide,
AVERTISSEMENT: Veuillez ne jamais exposer
les piles à une chaleur excessive telle que les
rayons de soleil, flammes ou toute autre source de
chaleur similaire.
AV ERT ISSEM ENT: L’adaptateur AC/DC de l’
appareil est utilisé pour déconnecter le système.
L’adaptateur AC/DC de l’appareil ne doit pas être
AVERTISSEMENT: Afin de réduire le risque
de décharge électrique, veuillez ne jamais retirer
le couvercle(ou panneau arrière). À l’
n’
l’
faire appel à un technicien qualifié.
Le symbole montrant un éclair terminé par
une flèche dans un triangle équilatéral est
destiné à avertir l’
d’
l’
un risque de décharge électrique
Le symbole montrant un point d’
dans un triangle équilatéral est destiné
à l’
instructions d’
fournie avec l’
Cet équipement est de Classe II ou appareil
électrique à double isolation. Il a été conçu de
façon à ne pas requérir une prise de terre de
sécurité.
L’adaptateur AC/DC de l’appareil et l’appareil
intérieur, il
existe aucune pièce qui puisse être vérifiée par
utilisateur. Pour la réparation de l’
appareil veuillez
utilisateur de la présence
une”tension dangereuse”
non isolée dans
appareil et d’
une force suffisante pour constituer
exclamation
utilisateur afin qu’
il se reporte aux
entretien jointes à la documentation
appareil.
3
IMPORTANT SAFETY INSTRUCTIONS
tel qu’un vase, ne doit être placé sur l’objet.
obstrué ou doit être facilement accessible pendant
son utilisation.Pour être complètement déconnecté de
l’alimentation d’entrée, l’adaptateur AC/DC de l’
appareil doit être déconnecté du secteur.
AVERTISSEMENT: Les marquages sont inscrits
en bas de l'appareil. Les précautions d'emploi
sont inscrites en bas de l'appareil.
AVERTISSEMENT: Des pressions acoustiques
excessives provenant d'écouteurs ou de casques
peuvent provoquer des pertes de l'audition.

4
To ensure reliable and safe operation of this equipment, please read carefully all the
instructions in this user guide, especially the safety information below.
Electrical Safety
•The TV set should only be connected to a main power supply with voltage that
matches the label at the rear of the product.
• To prevent overload, do not share the same power supply socket with too many other
electronic components.
• Do not place any connecting wires where they may be stepped on or tripped over.
• Do not place heavy items on them, which may damage the leads.
• Hold the main plug, not the wires, when removing from a socket.
• During a thunderstorm, or when not using the television for extended period of time,
turn off the power switch on the back of the television.
• Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet,
moist areas, such as bathrooms, steamy kitchens or near swimming pools.
• Pull the plug out immediately, and seek professional help if the main plug or cable
is damaged, liquid is spilt onto the set, if accidentally exposed to water or moisture,
if anything accidentally penetrates the ventilation slots or if the set does not work
normally.
• Do not remove the safety covers. There are no user serviceable parts inside. Trying
to service the unit yourself is dangerous and may invalidate the product’
Qualified personnel must only service this apparatus.
• To avoid battery leakage, remove exhausted batteries from the remote control, or
when not using for long period.
• Do not break open or throw exhausted batteries on a fire.
Do not block ventilation slots in the back cover. You may place the TV in a cabinet,
but ensure at least 5cm(2'') clearance all around.
• Do not tap or shake the TV screen, or you may damage the internal circuits. Take
good care of the remote control.
• To clean the TV use a soft dry cloth.Do not use solvents or petroleum based fluids.
• Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong, the wide blade, or the third prong is provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs.
• Unplug the apparatus during lightning storms or when unused for long periods.
• Refer all servicing to a qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled, or objects have fallen into the apparatus, has been
exposed to rain or moisture, does not operate normally, or has been dropped.
• Please always connect your television to a power outlet with protective ground
ADDITIONAL SAFETY INFORMATION
connection.
s warranty.
Physical Safety
•

ELEFT222
INSTRUCTION MANUAL
Please read all the instructions carefully before using this TV,
and keep the manual for future reference.
22" FHD Digital LED TV
5
PREPARATIONS
Warranty Card
What is Included?
15930 Val ley Blvd ., Cit y of Indu stry, CA 91 744
Remote Control Guide
Initial Assembly
Screw (B-ST4 x16 ,3 PCS)
(B-ST 4x16, 3PCS)
Screw
Base Stand
Take out the main unit and the
base stand from the carton,
connect the main unit and the
base stand as picture shows.
Fix the base stand with 3PCS of
B-ST4x16 screws.
Products Technical Assistance

6
PREPARATIONS
•
Switch the TV between On and Standby mode.
• SOURCE
Press to select among different input signal sources.
• MENU
Display the OSD (on screen display) menu.
• CH
Press to select a channel.
Front View
CH
VOL + VOL-
SOU RCE MENU
CH
• VOL +/-
Press to adjust the volume.

7
Your new TV is heavy, please consult with professional
wallmount installer to perform this installation.
PREPARATIONS
9. Headphone Socket
Connect to the Headphone.
7. HDMI Inputs
Connect to a High-Definition (HD) signal
input device.
5. VGA Input
Connect to a computer or other devices
with a VGA interface.
6. PC AUDIO Input
Connect to a computer audio output.
8. RF (75Ω) Input
Connect to the antenna (75Ω VHF/UHF)
socket with the RF coaxial cable.
4. COMPONENT Input
Connect to AV devices with component(Y/
Pb/Pr) video and audio input sockets.
2. USB Port
Connect to a USB storage device to play
photofiles.(USB mode).
Rear View
Wall Mounting
4
12 5
3. Optical Audio Signal Output Socket
Connect a digital sound system to
this jack.
3 6
7 8 9
1. DC 12V
Power line interface (12V).
Digital Au di o Out
(Optica l)
A wall mount kit (purchased separately) would allow you to mount your TV on the wall.
For detailed information on installing the wall mount, refer to the instruction. ELEMENT
is not responsible for any damage to the product or injury to yourself or others resulting
from the wall-mounting.
-This TV is compatible with a 100mm ×100 mm mounting hole pattern.
- 4 pcs of type M4×6(ISO metric) screws are required for installing the wall mount
bracket to your TV.
- Do not use screws that are longer than 6mm.Screws that are too long may cause
damage to the inside of the TV set.
-Do not fasten the screws too tight for this may damage the TV or cause the TV to fall.
-Do not mount the TV at more than a 15 degree tilt.
-Always use two people to mount the TV to a wall.
-Do not install your Wall Mount Kit while your TV is turned on. It may result in personal
injury due to electric shock.

8
PREPARATIONS
• If there is light around the TV, the remote control may fail or work abnormally.
• Please remove the batteries from the remote control when not in use for a long
period time.
• Actual function for remote control keys prevails.
• To prevent battery leakage which may result in bodily injury or damage to the
remote:
1. Install all batteries correctly, and as marked on the remote control.
2. Do not mix old and new batteries and do not mix alkaline,standard (carbon-zinc) or
rechargeable (ni-cad,ni-mh,etc.) batteries.
Remote Control
Mute Button
Power Button
Numeric Buttons
Channel Setup Button
Picture Mode Button
Sound Mode Button
Signal Source Button
Channel Selection Button
CH.LIST Button
FREEZE Button
Up Button
Left Button
TV Setup Menu Button
Stop Button
Play/Pause Button Next Button
Prev. Button
CC Button
Recall Button
Information Button
Volume Adjust Button
AUTO Button
ASPECT Button
ENTER Button
Right Button
Down Button
Add/Erase Button
EXIT Button
FAV Button
REPEAT Button
USB Button
V-CHIP Button
Sleep Button
MTS Button
Return Button

9
PREPARATIONS
Remote Control
USB Operation
Press to pause or resume the playback.
Press to stop the playback and clear the existing memory.
/ Press to skip between chapters.
REPEAT Press repeatedly to select the repeat mode.
TV Operation
Switch the TV between on and standby mode.
Mute and restore your TV sound.
0~9 Select a program (ATV/DTV mode)
Enter multiple program channel number , such as 2-1.
Return to previous viewing channel.
P.MODE Select picture mode: Dynamic/Movie/Natural/User/Standard/ Energy
Saving.
S.MODE Select sound mode: Standard/Music/Movie/User.
MTS Switch among different audio channels: STEREO/MONO/SAP.
SLEEP Set the TV sleep timer:off/5/10…/180/240min.
SOURCE Select among the different input signal sources: TV/AV/Component/
HDMI/VGA/USB.
INFO Display the present screen information such as the current channel
and input source.
Select a channel.
VOL+/- Adjust the volume.
FREEZE Freeze the picture.
CH.LIST Display program list.
AUTO Automatically adjust the Horizontal/Vertical position in PC (VGA) mode.
ASPECT Select the aspect ratio settings:Normal/Wide/Zoom/Cinema/Just scan.
Allows you to navigate the OSD menus and adjust the system settings
to your preference.
OK Confirm the selection in the OSD 'on screen display' menus.
MENU Display the OSD 'on screen display' menu.
EXIT Exit the OSD 'on screen display' menu.
ADD/ERASE Add or delete Favorite channels.
FAV Display the favorite channel list.
USB Access into the USB directly.
CC Closed Caption selection: Off/On/CC on Mute.
V-CHIP Set up parental control.
RETURN Return to previous menu.
CH /

10
CONNECTING EXTERNAL DEVICES
Digital Audi o Out
(Optica l)

11
OPERATING YOUR TV
• Connect the power cord to the power socket after you have completed all the
physical connections. At this stage, the TV will enter Standby Mode and the red
LED indicator will illuminate.
• In Standby Mode, press the button on the main unit or on the remote control to
turn the TV on. The red LED indicator will turn blue.
The button on the main unit or on the remote control can only
switch the TV into standby. To completely turn off the TV, please disconnect
the power cord from the power socket.
• If you are turning on your LED TV for the first time, you will see the following
menu below.
• Please select Home Mode or Retail Mode to continue.
•
Home Mode (Energy Saving) is the default as-shipped television configuration and settings.
And Home Mode (Energy Saving) is the setting in which the product qualifies for ENERGY ® STAR .
Any changes to default as-shipped television configuration and settings would change
the energy consumption. And enabling certain optional features and functionalities may increase
®
energy consumption beyond the limits required for ENERGY STAR qualification,asapplicable.
Retail Mode:Select Retail Mode if you would like your picture to be brighter.At times this mode
may use more energy to operate the Volume/Sound mode and the Picture Mode. In this setting,
the power consumption may possibly exceed the limited requirement of the ENERGY STAR®
qualification.
®
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S.
Department of Energy helping us all save money and protect the environment through energy
efficient products and pratices.
The On-MODE Power under Home Mode should be less than 19.2 W.
The SLEEP-MODE Power should be less than 0.5 W.
Note:If you want change the modes between Home Mode (Energy Saving) and Picture Mode,
you can change the setting in the Setup Menu under Picture Mode.
Setup Wizard
Choose your Picture Mode r
Home Mode optimizes the standard video settings for
ENERGY STAR® qualification.
Home Mode(Energy Saving)
Retail Mode
Move Select MENUOK
Setup Wizard
Are you sure you want Home Mode (Energy saving)?
In this mode ENERGY STAR® saving are realized.
Yes
No
Move Select
Exit
MENUOK
Turning On/Off Your TV
Setup Wizard
Press Yes to confirm.

12
• Press the buttons to select your desired mode and press OK button to
confirm.
Menu Language
Select your desired language to be displayed on the
menu. The default on-screen menu language is set
as English.
Air/Cable Select antenna between Air and Cable.
Cable System Select Cable system: Auto, STD, IRC, HRC.
Auto Scan Search and store the available
channels automatically.
• Press the SOURCE button on the
main unit or on the remote control to
display the Input Source list.
• Press the buttons to select
your desired input source among:
TV/Component&AV/HDMI/VGA/USB
OK
button to confirm.
• Press the CH /CH buttons on the main unit or on the remote control repeatedly
to select the channel.
• Press the 0-9 buttons on the remote control to select the channel directly.
Press "4", and then press OK button to select channel 4.
Press "4" and "5", and then press OK button to select channel 45.
Press "1", "2" and "3", and then press OK button to select channel 123.
OPERATING YOUR TV
• Press the VOL+/- buttons on the main unit or on the remote control to adjust the
volume.
• If you wish to switch the sound on, press the MUTE button again or the VOL+
button to resume the sound.
INPUT SOURCE
TV
HDMI
VGA
USB
Component/AV
Selecting the Input Source
Channel Selection
Volume Adjustment
Setup Wizard
Air/Cable
Cable System
Auto Scan
Cable
AUTO
Select
Move Exit
MENU
English
Menu Language
and then press

13
CUSTOMIZING TV SETTINGS
• Press the MENU button to display the main menu.
• Press the buttons to navigate and select the available menus.
Navigating the On-screen Display
Picture Mode
Contrast
Brightness
Color
Normal
Select
Move Exit
Picture
Audio
Time
Setup
Lock
Channel
Tint
Sharpness
Color Temp.
Blue Screen On
60
48
50
60
0
Energy Saving
MENU
Sound Mode
Bass
Treble
Select
Move Exit
Picture
Audio
Time
Setup
Lock
Channel
Balance
Surround Sound
Auto Volume
SPDIF Type
Off
On
PCM
Standard
50
50
0
Audio Language English
MENU
Sleep Timer
Time Zone
Daylight Saving Time
Select
Move Exit
Picture
Audio
Time
Setup
Lock
Channel
Off
Pacific
Off
Clock 1980/01/06 10:55AM
MENU
Menu Language
Transparency
Zoom Mode
Noise Reduction
SelectMove Exit
Picture
Audio
Time
Setup
Lock
Channel
Advanced
Closed Caption
DLC On
English
Off
Wide
Middle
Restore Default
MENU
Enter Password
Select
Move Exit
Picture
Audio
Time
Setup
Lock
Channel
----
MENU
Air/Cable
Auto Scan
Favorite
Select
Move Exit
Picture
Audio
Time
Setup
Lock
Channel
Show/Hide
Channel No.
Channle Label
DTV Signal:
Cable
MENU

14
CUSTOMIZING TV SETTINGS
• Press the MENU button on the main
unit or on the remote control then
press the buttons to select
Picture menu and then press the
or the OK button to enter.
• Press the buttons to select the
following picture options and then
press the buttons to adjust each
option’
Picture Mode
Cycle among picture modes: Energy Saving/Standard/
Dynamic/Movie/Natural/User.
Alternative: you may press the P.MODE
button to select the picture mode directly.
Contrast Adjust the difference between light and dark levels in
the pictures. (For User mode)
Brightness Increase or decrease the amount of white in the
picture.(For User mode)
Color Control the color intensity. (For User mode)
Tint Adjust the balance between red and green levels.
Sharpness Adjust the level of crispness in the edges between
light and dark areas of the picture. (For User mode)
Color Temperature Cycle among color temperature: Cool/Normal/Warm.
Blue Screen Allow the blue background to turn On/Off during weak
or no signal conditions.
s setting.
Picture Settings
Picture Mode
Contrast
Brightness
Color
Normal
Select
Move Exit
Picture
Audio
Time
Setup
Lock
Channel
Tint
Sharpness
Color Temp.
Blue Screen On
60
48
50
60
0
Energy Saving
MENU

15
CUSTOMIZING TV SETTINGS
•Press the MENU button on the main
unit or on the remote control then
press the buttons to select
Audio menu and then press the or
the OK button to enter.
• Press the buttons to select
the following audio options and then
press the buttons to adjust each
option’
Sound Mode
Allow the selection of an audio-enhancement
technique: Standard/Music/Movie/User.
Alternative: You may press the S.MODE
button to select the sound mode directly.
Bass Control the relative intensity of lower-pitched sounds.
(For User mode)
Treble Control the relative intensity of higher-pitched sounds.
(For User mode)
Balance Adjust the audio output between the left and the right
speakers.
Surround Sound Provide an enhanced listening experience.
Auto Volume Volume levels are automatically controlled.
SPDIF Mode Select the digital audio output mode between RAW/
PCM.
Audio Language Select audio language among: English, French,
Spanish.
s setting.
Audio Settings
Sound Mode
Bass
Treble
Select
Move Exit
Picture
Audio
Time
Setup
Lock
Channel
Balance
Surround Sound
Auto Volume
SPDIF Type
Off
On
PCM
Standard
50
50
0
Audio Language English
MENU

16
CUSTOMIZING TV SETTINGS
•Press the MENU button on the main
unit or on the remote control then
press the buttons to select
Time menu and then press the or
the OK button to enter.
• Press the buttons to select
the following time options and then
press the button to adjust each
option’
Sleep Timer
Select a period of time after which the TV
automati cally switches to s tandby mode:
Off/5/10/…/180/240min.
Alternative: You may press the SLEEP
button repeatedly to select the number
of minutes directly.
Time Zone Select a Time Zone among: Pacific/Alaska/Hawaii/
Eastern/Central/Mountain Atlantic or Newfoundland./
Daylight Saving Time Select to turn On/Off daylight saving time.
Clock (DTV mode) The clock is set automatically when receiving a
digital signal.
s setting.
Time Settings
Sleep Timer
Time Zone
Daylight Saving Time
Select
Move Exit
Picture
Audio
Time
Setup
Lock
Channel
Off
Pacific
Off
Clock 1980/01/06 10:55AM
MENU

17
• Press the MENU button on the main
unit or on the remote control then
press the buttons to select
Setup menu and then press the or
the OK button to enter.
• Press the buttons to select
the following setup options and then
press the buttons to adjust each
CUSTOMIZING TV SETTINGS
option’
Menu Language
Select menu language among: English, Français or
Español. The default on-screen menu language is
English.
Transparency Select to turn On/Off transparency function.
Zoom Mode Select zoom mode among: Normal/Wide/Zoom/Cinema/
Just Scan( ).only for HDMI source
Noise Reduction Reduce the noise level of the connected device: Off/
Weak/Middle/Strong.
Advanced
Adjust the PC desktop content.
(VGA source mode only)
Closed Caption
Al lo ws yo u t o t ur n c lo s e d
captioning of audio on or off,
select analog or digital modes, or
personalize the captioning style.
CC Mode Select CC mode among: On, Off or CC on
Mute.
Basic
Selection
Select analog mode among: CC1, CC2,
CC3, CC4, Text1, Text2, Text3, Text4.
Advanced
Selection Select digital mode among: Service1~6.
Option Personalize the captioning style,such as
the size and color of the digital caption.
DLC Select to turn On/Off the dynamic luminance control.
Restore Default Restore the TV to factory default settings. (Except the lock
settings)
s setting.
Setup Menu
Menu Language
Transparency
Zoom Mode
Noise Reduction
SelectMove Exit
Picture
Audio
Time
Setup
Lock
Channel
Advanced
Closed Caption
DLC On
English
Off
Wide
Middle
Restore Default
MENU
H-POS
V-POS
Clock
Phase
Adjust
Move Return
Picture
Audio
Time
Setup
Lock
Channel
Auto
50
50
50
50
MENU
Basic Selection
Advanced Selection
Option
Select
Move Return
Picture
Audio
Time
Setup
Lock
Channel
CC1
Service1
MENU
CC Mode Off

18
CUSTOMIZING TV SETTINGS
•Press the MENU button on the main unit or on the remote control and then press
the buttons to select Lock menu.
• Use the 0-9 buttons to input 4-digit password to enter the Lock menu.
• Press the buttons to select the following options and then press the
buttons to adjust each option’
Change Password
Use 0-9 buttons to input the old
password and then input the
new 4-digit password. Re-enter
new password for confirmation.
System Lock
Select to turn On/Off system lock. The following options
(US, Canada, RRT Setting and Reset RRT)wil lonly be
accessible when you turn the system lock on.
US
TV TV RATING: Press OK button to lock or
unlock TV rating.
MPAA Select MPAA rating among: N/A,G, PG, PG-
13, R, NC-17,or X.
Canada
Canada
English
Select MPAA rating for English-speaking
Canada among: E, C, C8+, G, PG, 14+, 18+.
Canada
French
Select MPAA rating for Quebec Canada
among: E, G, 8ans+, 13ans+, 16ans+,
18ans+.
RRT Setting Set Rating Region Table.
Reset RRT Select to reset the RRT setting.
Clear Lock Clear all lock settings.
The default pass word is"0000".
s setting.
Lock Settings
Input 4-digit
password
Enter Password
SelectMove Exit
Picture
Audio
Time
Setup
Lock
Channel
----
MENU
System Lock
US
Next
Move Return
Picture
Audio
Time
Setup
Lock
Channel
Canada
RRT Setting
Reset RRT
Clear Lock
Off
MENU
Change Password