Timer Function: The timer function allows fog to be emitted at designated intervals. The remote has three (3)
L.E.D.s that indicate different functions.
- The RED L.E.D. located to the left will indicate the timer and controller is turned on and is activated.
- The RED L.E.D. will indicate fog output is available and ready for continuous output.
- The GREEN L.E.D. located to the right is for manual fogging, wait for the RED L.E.D. to light up, then
press the button.
The remote also contains two rotary knobs.
- The Duration knob serves two functions 1) Turns the timer on and off. 2) Sets the timers duration (Length of
fog output).
- The interval knob sets the amount of time in between fog output from 30 seconds to 10 minutes.
Turing these knobs in a clockwise direction will increase there values, turning them in a counter-clockwise
direction will decrease their values.
Caution: Before removing or replacing the remote control unit disconnect the power cord.
1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our
1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with
dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover
items or parts prone to wear and tear: motors, fuses, brushes and belts. Eliminator Lighting warranty
is only valid with-in the United States.
