elink LNK-AP80 Series User manual

E-link China Technology Co., Ltd.
Http://www.e-linkchina.com 1[email protected]
1200Mbps High Power Outdoor Wireless AP
Model: LNK-AP80 Series
Overview
LNK-AP80 is an Qualcomm Solution 11ac high power industrial use Outdoor CPE with the
next generation 802.11ac Wi-Fi standard, combined 1200Mbps Wi-Fi speed over
2.4GHz(300Mbps) and 5GHz(900Mbps), equipped Gigabit WAN port, fast Ethernet data
rate make more than 100 end users can access into it to enjoy seamless HD movies,
streaming, online gaming, wireless security and other bandwidth-intensive tasks.
Metal waterproof, dust proof and sunscreen shell, temperature adaptive
LNK-AP80 with metal waterproof, dust proof and sunscreen shell, avoid the damage from
dust, thunderstorm weather. Meantime, it adaptive to various environment, the working
temperature can be normal at -40℃to 55℃. Suitable for any country.
High Power design, N connector for external antenna, more range and
stable signal
Designed in two line Power Amplifier on PCB board, the power can be 1000mW high
power, 4PCS N connector,can connect with panel/omni antenna based on request, can
greatly increase the Wi-Fi range and supply the stable Wi-Fi signal for users.
Power over Ethernet
LNK-AP80 has integrated IEEE802.3at Power over Ethernet (PoE), for easy installation
and lower cost. So it can be installed in areas where power outlets are not readily
available, eliminating the mess of altering existing network infrastructure.
Access Controller System & Cloud Management System
Work with WLAN controller in wireless AP operation mode, easily access advanced
network settings through PC, like AP status monitor, change IP address, ESSID, Channel,

E-link China Technology Co., Ltd.
Http://www.e-linkchina.com 2[email protected]
Password, upgrade firmware, backup and restore....
Then work with Cloud Management System, easy to do central and remote management,
advertisement and multi authentication make this device more professional in Wi-Fi
Projects.
Features
Comply with IEEE 802.11ac/b/g/n, dual band, 1200Mbps Data Rate
1 10/100/1000Mbps WAN Port，faster Ethernet.
1000mW high power, can connect with external antenna for stronger signal strength
and more wireless coverage, 16M Flash, 128M DDR2 RAM, more user, more stable
Support IEEE 802.3at PoE standard
Support SSID broadcasting, Multi SSID up to 8 (4 SSID in 2.4GHz, 4 SSID in 5GHz)
Support Gateway (PPPOE, static IP, dynamic IP) , Wireless AP, Repeater, WISP
operation mode
With function of build in firewall, IP filter, URL filter and MAC filter
Comply with IEEE 802.3az standard, beamforming technology, RF power adjustment
and frequency analyzer for better application in different environment
Support DDNS, VPN pass through, Port forwarding and DMZ host
Support 64/128-bit WEP security, 128bit WPA (TKIP/AES) security
Application:
1. Work with Panel antenna for more Wi-Fi transmit mainly:
2. Work with omni antenna for Wi-Fi coverage:

E-link China Technology Co., Ltd.
Http://www.e-linkchina.com 3[email protected]
Technical Indexes
Hardware
Chipset
Atheros QCA9563 + QCA9882 +QCA8334
Standard
802.11ac/b/g/n, MIMO technology
Memory
128MB DDR2 RAM
Flash
16MB
Interface
1 * 10/100 /1000Mbps RJ45 WAN Port
1 * Reset button, press 15 seconds to revert to default setting
Antenna
4PCS SMA connector
Power consumption
48V PoE<30W
Weight
4KG
RF Data
Frequency
2.4G: 802.11b/g/n; 5GHz: 802.11a/n/ac
2.4GHz: 2.312GHz to 2.4835GHz
5GHz: 5.020 - 6.1000 GHz
Modulation
OFDM = BPSK,QPSK, 16-QAM, 64-QAM
DSSS = DBPSK, DQPSK, CCK
Throughput
1200 Mbps
RF Power
2.4G: 11n @MCS7:26±2DB, @MCS0:28±2DB.
11g @54M:27±2DB, @6M:29±2DB.
11b @11M:28±2DB, @1M:30±2DB.
5.8G: 11a @54M 23.5±2DB, @6M:26.5±2DB.
11n @HT20:MCS7 22.5±2DB, @MCS0:25.5±2DB.
11ac@HT80:MCS9 20.5±2DB, @MCS0:23.5±2DB.
Receive Sensitivity
2.4G: 11n: -70dbm@MCS7, -88dbm@MCS0.
11g: -72dbm@54Mbps, -88dbm@6Mbps.
11b: -85dbm@11Mbps, -94dbm@1Mbps.
5.8G: 11a: -72dbm@54Mbps, -90dbm@6Mbps.
11n@HT20: -70dbm@MCS7, -90dbm@MCS0.
11ac@HT80:-60dbm@MCS9, -86dbm@MCS0.
EVM
802.11n: ≤-28 DB
802.11g: ≤-25 DB
802.11b: ≤-10 DB
802.11a: ≤-25 DB
PPM
±20ppm
Max Users
128+
Firmware Features:
Operation mode
Wireless AP, Gateway, WISP, Wi-Fi Repeater
WAN Type
Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)
Wireless Security
64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption
SSID
Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G)
Firewall
DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding

E-link China Technology Co., Ltd.
Http://www.e-linkchina.com 4[email protected]
Protocols
IPv4
Others:
Package Contents
1200Mbps Dual Band wireless access point
Ethernet Cable
Quick Installation Guide
Setting Accessory
System
Requirements
Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8,
MAC OS, NetWare, UNIX or Linux
Environment
Operating Temperature: -40~50 ℃, Storage Temperature: -40~70 ℃
Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90%
non-condensing
Management
Firmware GUI , Remote Management, WLAN Controller, Cloud Management
System
Accessory:
Thunder Accessory if need:

E-link China Technology Co., Ltd.
Http://www.e-linkchina.com 5[email protected]
Frequency
0-2.5GHz
Discharge Voltage
230V
VSWR
≤1.06/1.2GHz ≤1.2/2.5GHz
Insertion Loss
≤0.1dB/1.5GHz ≤0.2dB/2.5GHz
Circulation Capacity
10kA@8/20μs
Insulation Resistance
≥500MΩ
Contact Resistance
Inner Conductor: ≤3mΩ
Outer Conductor: ≤2mΩ
Ordering Information
Model
Description
LNK-AP80-1200
1200Mbps High Power Outdoor Wireless AP without antenna:
2.4GHz + 5.8GHz, 300Mbps + 900Mbps,
1 * 10/100/1000Mbps(Inside of shell), Water-proof Level, IP65
IEEE 802.3at 48V POE
User Manual, Install accessory, LAN cable
LNK-AP80-1200A
1200Mbps High Power Outdoor Wireless AP with antenna:
2.4GHz + 5.8GHz, 300Mbps + 900Mbps,
1 * 10/100/1000Mbps(Inside of shell), Water-proof Level, IP65
IEEE 802.3at 48V POE
2*2.4G 8dBi omni antenna, 2*5.8G 12dBi omni antenna, User Manual, Install
accessory, LAN cable