EnGenius EOC-2610 User manual

* Theoretical wireless signal rate based on IEEE standard of 802.11b, g chipset used. Actual throughput may vary.
Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice. 7/23/2008
Long Range Wireless Access Point / Client Bridge EOC-2610
2.4GHz 54Mbps 802.11b/g Multi-Function AP
EOC-2610 is a long range outdoor wireless Access Point and Client
Bridge that operates seamlessly in the 2.4GHz frequency spectrum.
It features high transmitted output power and high receivable
sensitivity along with antenna diversity. High output power and high
sensitivity can extend range and coverage to reduce the roaming
between Access Points to get a more stable wireless connection. It
also reduces the expense of equipment in the same environment.
It supports distance control by 1km to 30km; antenna diversity function
and RSSI indicator which enables the best transmit and receive signals
for traffic communication. This product comes with PoE injector for
building in outdoor environment easily.
To protect your wireless connectivity, it can encrypt all wireless
transmissions through 64/128-bit WEP data encryption and also
supports WPA/WPA2. The MAC address filter lets you select
exactly which stations should have access to your network. In
addition, the User Isolation function can protect the private network
between client users.
The attractive design, high performance, and array of features
make EOC-2610 a suitable wireless solution for your residence or
office.
Package Content
¾1* 802.11b/g Long range AP/CB (EOC-2610)
¾1* PoE injector (EPE-1212)
¾1* Power Adaptor
¾1* CD-ROM with User’s Manual
¾1* QIG
¾1* Metal strap
¾1* Special screw set

* Theoretical wireless signal rate based on IEEE standard of 802.11b, g chipset used. Actual throughput may vary.
Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice. 7/23/2008
Features
Wireless
- 2.4GHz It works in 2.4GHz frequency spectrum
- High output power Transmit output power programmable for different country selections
- High Data Rate High speed physical transmitting rate up to 54Mbps with 11g, support large
payload such as MEPG video streaming
- Multifunction application Access Point/Client Bridge
- Long range transmitting Transmit power control and distance control (ACK timeout)
- Signal Strength LED indicators have the best transmit and receive signal for traffic
communication
- Antenna Diversity Two internal panel antennas and also could switch to external antenna for
applications
Networking
- Public wireless solution An AP interface that is especially useful in public areas such as
hotspots and enterprise
- Signal Strength Display RF signal strength status shown LEDs of 3 colors, making network
build-up easier
- QoS(WMM) Enhance performance and density (Phase 2)
- MSSID
Security
- 802.11i WEP, WPA, WPA2 (Encryption support TKIP/AES)
- 802.1x IEEE 802.1x Supplicant support in CB mode
- MAC address functions MAC address filter (AP mode)
- L2 isolation
- Station isolation
Management
- Firmware Upgrade Upgrading firmware via web browser, setting are reserved after upgrade
- Reset & Backup Reset to factory default. User can export all setting into a file via WEB
- MIB MIB I, MIB II(RFC1213)
- SNMP V1, V2c

* Theoretical wireless signal rate based on IEEE standard of 802.11b, g chipset used. Actual throughput may vary.
Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice. 7/23/2008
Technical Specifications
Hardware Specification
MCU/RF Atheros AR2315 Single chip
Memory 32MB SDRAM
Flash 8MB
Physical Interface One 10/100 Fast Ethernet RJ-45
Reset Button
One SMA Connector
One switch (external and internal antenna switching)
LED indicators Power/ Status
LAN (10/100Mbps)
WLAN (Wireless is up)
3* Link Quality (Client Bridge mode)
¾Green: Good Quality
¾Yellow: Marginally Acceptable Quality
¾Red: Bad Quality
Power Requirements Active Ethernet (Power over Ethernet, IEEE802.3af) 12 V DC/1A
Proprietary PoE design
Regulation Certifications FCC Part 15/UL, ETSI 300/328/CE
RF Specification
Frequency Band 802.11b/g
2.412~2.472GHz
Modulation Technology OFDM = BPSK, QPSK, 16-QAM, 64-QAM
DSSS = DBPSK, DQPSK, CCK
Operating Channels 802.11b/g
11 for North America, 14 for Japan, 13 for Europe
Receive Sensitivity
(Typical)
802.11g
-92 dBm @ 6Mbps,
-74 dBm @ 54Mbp
802.11b
-97 dBm @ 1Mbps
-89 dBm @ 11Mbps

* Theoretical wireless signal rate based on IEEE standard of 802.11b, g chipset used. Actual throughput may vary.
Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice. 7/23/2008
Available transmit power
(Average power)
FCC ETSI
Frequency Power Frequency Power
2.412~2.462
GHz
IEEE802.11g
26dBm@6~24Mbps
25dBm@36Mbps
23dBm@48Mbps
22dBm@54Mbps
2.412~2.472
GHz
IEEE802.11g
26dBm@6~24Mbps
25dBm@36Mbps
23dBm@48Mbps
22dBm@54Mbps
2.412~2.462
GHz
IEEE802.11b 27dBm@1~11Mbps 2.412~2.472
GHz
IEEE802.11b 27dBm@1~11Mbps
Tolerance +/-1 dBm Tolerance +/- 1 dBm
Internal Antenna Embedded 10dBi Panel antenna (Antenna diversity)
External Antenna 1* SMA connector
Software Features
General
Topology Infrastructure
Protocol / Standard IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.11b/g (2.4GHz WLAN)
Operation Mode 802.11 11b/g
Access Point
Client Bridge
LAN DHCP Client
Wireless Channel Selection (Setting varies by countries)
Transmission Rate
11 b/g：54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
Long distance transmission : 1km to 30km
Transmit power table
Signal Strength indication using LEDs
Security WEP Encryption-64/128/152 bit
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1x Authenticator/supplicant
Hide SSID in beacons
802.1Q VLAN

* Theoretical wireless signal rate based on IEEE standard of 802.11b, g chipset used. Actual throughput may vary.
Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice. 7/23/2008
L2 isolation(AP mode)
Wireless STA (Client) connected list
Multiple SSID
QoS WMM (Phase 2)
Management
Configuration Web-based configuration (HTTP)
Firmware Upgrade •Upgrade firmware via web-browser
•Keep latest setting when f/w update
Administrator Setting •Administrator password change
Reset Setting •Reboot (Press 1 second)
•Reset to Factory Default (Press 5 seconds)
System monitoring Status, Event Log
SNMP V1, V2c (Phase 2)
MIB MIB I, MIB II (RFC1213) and Private MIB (Phase 2)
Backup & Restore Settings through Web
Time setting NTP (Auto-setting of time)
Time setting manually
Environment & Mechanical
Temperature Range Operating -20°C~70°C
Storage -30°C to 80°C
Humidity
(non-condensing) 0%～90% typical
Dimensions 260mm (L) x 84mm (W) x 55mm (H)
Weight 300g

* Theoretical wireless signal rate based on IEEE standard of 802.11b, g chipset used. Actual throughput may vary.
Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice. 7/23/2008
Application
Access Point + Client Bridge scenario
Long Range Transmitting

* Theoretical wireless signal rate based on IEEE standard of 802.11b, g chipset used. Actual throughput may vary.
Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice. 7/23/2008
Product ID & Mounting Base
Front Rea
r
Standard Mounting Kits
Pole mount
Optional mounting kits
Wall
mount
Window
mount