Elipta Nimbus 45 E1042T Quick start guide

Part code
E1042T
Diffuser
Opal
Dimensions (mm)
450x100
Cable length (mm)
2000
Construction
Teak/Stainless steel
Finish
Teak/Stainless steel
Class
Class I
IP rating
IP44
Maximum wattage
CFL 20W –LED 10W
Lamp base
E27
Lamp included
No
Dimmable
Dependant on lamp
Input voltage
240V 50Hz
Net weight (Kg)
2.1
Gross weight (Kg)
2.6
Warranty
2 Years
Manufactured in accordance with
BS EN 60598
Origin of manufacture
PRC
Installation notes
Ensure mains supply is isolated prior to installation of this
product.
Remove the top section Nimbus/Cirrus: Unscrew the Allen key
screws in the top cap using the Allen key provided and remove
the louvre assembly where fitted.
Refer to the instruction manual for further guidance.
Note –This product must be installed by a qualified electrician.
E1042T - Elipta Nimbus 45 Bollard Light