Ellisons EST8048 User manual

EST8048
Ellisons, 43 Bayton Road, Exhall, Coventry, CV7 9EF
www.ellisons.co.uk
1
Product Manual
EST8048

EST8048
Ellisons, 43 Bayton Road, Exhall, Coventry, CV7 9EF
www.ellisons.co.uk
2
Table of Contents
CONTENTS
Part 1: Receiving and Inspection
Part 2: Specification
1. Product View
2. Description
3. Dimensions
Part 3: Assembly
1. Parts
2. Assembly steps
Part 4: Operation & Care
1. Operation
2. Upholstery Care
3. Metal Frame Care
Part 5: Warranty

EST8048
Ellisons, 43 Bayton Road, Exhall, Coventry, CV7 9EF
www.ellisons.co.uk
3
Part 1: Receiving and Inspection
1.Before unpacking, please check the condition of the outer box.
Please check whether the outer box is damp, damaged, or deformed.
If so, please report to the relevant sales staff. It is strongly
recommended this item is unpacked by two people.
2. Please be careful when unpacking. Do not use sharp tools which
may damage the product.
3. Check whether the accessories are complete before beginning
assembly.
Please read through this manual before assembling, installing, or using the product to ensure safe
and correct use.
This product is designed for commercial use in hairdressing and beauty salons.
Do not use this product for purposes other than the practices and services typically offered in these
places.
Please keep this manual in a safe place for your future reference.

Ellisons, 43 Bayton Road, Exhall, Coventry, CV7 9EF
www.ellisons.co.uk
4
EST8048
Part 2: Specification
1. Product view
2. Description
1Backrest
2Seat
3Pedal
4Hydraulic pump
5Base
6Wheels
6

EST8048
Ellisons, 43 Bayton Road, Exhall, Coventry, CV7 9EF
www.ellisons.co.uk
5
3. Dimensions
Seat Height: 470-600mm/ Total Height: 790-920mm
Seat width: 460mm/ Seat depth: 400mm

Ellisons, 43 Bayton Road, Exhall, Coventry, CV7 9EF
www.ellisons.co.uk
6
EST8048
Part 3: Assembly
1. Parts
2. Assembly steps
Note for assembly:
2 connectors on the armrest
2 connectors on the backrest
Spare Parts List:
A. Backrest x 1
B. Seat x 1
C. Base x 1
D. Pump x 1
E. Wheels x 5
F. Screw x 2
G. Allen wrench x 1
Steps:
1) Insert the wheels into the base
2) Insert the pump into the base
3) Insert the stand of the backrest into the bottom of the seat and tighten with screw.
4) Align the holes on the bottom of the seat with the pump

EST8048
Ellisons, 43 Bayton Road, Exhall, Coventry, CV7 9EF
www.ellisons.co.uk
7

Ellisons, 43 Bayton Road, Exhall, Coventry, CV7 9EF
www.ellisons.co.uk
8
EST8048
Part 4: Operation & Care
1. Operation
a) Assembly and construction:
Check all fastenings for any loosened screws etc. If found, please tighten
appropriately. Continue to monitor during use.
b) Height adjustment:
1. Remember to always keep the hydraulic adjustment pump upright. Do not to
stand, solely, on the footrest.
2. Pump the hydraulic to full height and back down several times, right after
assembly, to prime the hydraulic fluid. This will keep the pump smooth and
responsive.
3. Note that short quick pumping is more effective than pressing the lever all
the way down each time.
c) In use :
1. For ease and comfort, ensure that your customers enter and exit the chair at
its lowest position.
2. For comfort and stability while seated, recommend your customers to use
the footrest.
3. Do not sit, or apply excess pressure, onto arms or backrest.
4. Ensure the chair is placed on a flat secure surface and does not create trip
hazards with cables or fixtures.
5. If any instability is noticed during use, discontinue use and ensure the chair is
checked by a suitably qualified person.
6. Avoid direct sunlight or heat sources.
7. Maximum load 150kg
2. Upholstery Care
1. Clean using a damp cloth and always dry after cleaning.
2. For stubborn dirt use mild detergent and wipe clean with water, afterwards,
and dry.
3. Do not use any strong solvents on the upholstery such as alcohol or acetone.
4. Do not use abrasives of any kind.
5. Do not use brushes or scouring products.

Ellisons, 43 Bayton Road, Exhall, Coventry, CV7 9EF
www.ellisons.co.uk
9
EST8048
3. Metal Frame Care
Best practice includes:
1. Wear clean gloves.
2. Avoid contact with strong and abrasive floor cleaners.
3. When cleaning nearby surfaces, protect the frame by covering with plastic.
4. Do not allow corrosive materials to contact the frame. Keeping stainless steel
products clean and free of salt or other corrosive elements
Never use the following products to clean stainless steel:
1. Oven cleaners
2. Chloride bleach
3. All-purpose cleaners
4. Any cleaner containing chloride
5. Steel wool or other abrasive scrubbing pads
Cleaning:
1. Use a mild detergent with warm water and a clean, soft cloth.
2. Use clean water. Gritty, dirty or excessively hard water can leave spots or
brownish stains.
3. Wipe down with a clean sponge or cloth.
4. Use clean rinsing water to avoid water marks.
5. Dry with a clean dry cloth or an air blower.

Ellisons, 43 Bayton Road, Exhall, Coventry, CV7 9EF
www.ellisons.co.uk
10
EST8048
Part 5: Warranty
This product is guaranteed against mechanical defects for 12 months from date of
purchase. During this guarantee period Ellisons will repair or replace the product
free of charge provided the fault was not caused by misuse or improper handling,
negligence, normal wear and tear, accidental damage or by any modifications made
by the purchaser. Faulty products should be returned, see Ellisons website for
returns policy. Returns damaged by poor packaging are the responsibility of the
purchaser. If returning under this guarantee, you will be required to enclose proof
and date of purchase. Please quote model number and batch number of the product
in all correspondence. This guarantee does not affect your statutory rights.
DO NOT THROW THIS AWAY