Elo TouchSystems E926356 User manual

Revision B
P/N E487265
www.elotouch.com
Quick Installation Guide
Elo 2D Barcode Scanner
© 2017 Elo Touch Solutions, Inc. All rights reserved.
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no
representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness
for a particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without
obligation of Elo to notify any person of such revisions or changes.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise
without prior written permission of Elo Touch Solutions, Inc.
Elo (logo) and Elo Touch Solutions are trademarks of Elo and its Affiliates.
North America
800-ELO-TOUCH
Tel [phone]
Fax [phone]
[email protected]
Europe
Tel [phone]
Fax [phone]
[email protected]
Asia-Pacific
Tel [phone]
Fax [phone]
[email protected]
Latin America
Tel [phone]
Fax [phone]
EloSales.LAT[email protected]
Elo Touch Solutions Technical Support
Online self-help:
www.support.elotouch.com
1x
2x
2x

Please go to www.elotouch.com/support to verify you have the latest drivers before installing this device.
Installation
Select location to mount the bar
code scanner. Elo recommends the
lower location in either portrait or
landscape orientation.
1
2
3
Remove the selected peripheral
cover from the touchmonitor
Gently insert the bar code scanner
into the peripheral bay taking care
to ensure the connector mates
properly.
Install the 2 at head screws included
with the kit and cover the screws with
the adhesive mylar covers if desired.
Windows Systems:
Visit the N3680 product page on the Honeywell Scanning and Mobility website to download and install
EZCong for Scanning (Version 4.5.20) and Honeywell Scanning and Mobility USB Serial Driver
Android systems:
The Elo Barcode Scanner is ready to use in its default mode. The scanner default mode is:
1. USB virtual com port interface
2. Presentation mode (always on)
3. Beep on scan
4. Set up to read most common codes.
USB Keyboard Mode
USB HID Mode
Please note: USB Keyboard Mode will automatically add a CR (carriage return) sufx.
To return the scanner to the default conguration mode (USB Virtual COM Port), scan the barcode below:
For additional settings and congurations, please visit the product page on www.elotouch.com
4