ELTEX Z-Wave STICK User manual

ELTEX Z-Wave STICK
User Manual

____________________________________________________________________________________
2 ELTEX Z-Wave STICK. User manual
CONTENTS
1 GENERAL INFORMATION .................................................................................................................................3
2 DEVICE SPECIFICATION ....................................................................................................................................4
3 DESIGN .............................................................................................................................................................4
4 OPERATION INSTRUCTION...............................................................................................................................5
4.1.1 Installation........................................................................................................................................5
4.1.2 Inclusion (adding) and Exclusion (removing) modes........................................................................5
4.1.3 Resetting the Z-Wave USB Stick .......................................................................................................5
5 TECHNICAL SUPPORT .......................................................................................................................................6

____________________________________________________________________________________
ELTEX Z-Wave STICK. User manual 3
1GENERAL INFORMATION
ELTEX Z-Wave STICK is a USB 2.0 hardware device for connecting Z-Wave products. The USB STICK operates
as a hardware interface for connection of Z-Wave devices on a network with a host: the device operates at
869 MHz using Z-Wave radio protocol to interact with devices on a Z-Wave network. Connecting to a PC/ laptop
or other system through USB 2.0, the device transmits data gathered from the Z-Wave devices to a host. Thus,
ELTEX Z-Wave STICK connect devices on the network with a network controller.
The device can be operated in any Z‐Wave network with other Z‐Wave certified devices from other
manufacturers and/or applications. Regardless of vendor, all non‐battery operated nodes within the network will
act as repeaters to increase network reliability.

____________________________________________________________________________________
4 ELTEX Z-Wave STICK. User manual
2DEVICE SPECIFICATION
Product information
Name
ELTEX Z-Wave STICK
SDK version
6.81.03
API version
4.61
Compatible systems
Windows 7, 8, 10
Linux, Mac OS
Hardware platform
ZM5101
Z-Wave library type
Bridge Controller
Z-Wave device type
USB Interface
Dimensions
Length
66 mm
Height
13 mm
Width
20 mm
RF communication
Protocol
Z-Wave, Z-Wave Plus
RF data range
9.6 kbps, 40 kbps, 100 kbps
Frequency range
868-869 MHz
General parameters
Control temperature
from -10ᵒС to +40ᵒС
Storage temperature
from -20ᵒС to +50ᵒС
Relative humidity
5-90%
Action radius
30 m
Power supply
USB-powered
3DESIGN
The Z-Wave USB Stick is manufactured in 66x20x13mm (LxWxH) plastic housing. The layout of the device is
shown below:

____________________________________________________________________________________
ELTEX Z-Wave STICK. User manual 5
4OPERATION INSTRUCTION
4.1.1 Installation
You may use any application allowing Z/IP clients to control nodes in a Z-Wave network. For example, you
may use such applications as Z/IP Gateway or PyZ/IP. To find more detailed information on the installation and
configuration of these applications, see the website of SILICON LABS company by using the link below
https://www.silabs.com/products/development-tools/software/z-wave/controller-sdk/z-ip-gateway-sdk.
ELTEX Z-Wave STICK operates as a serial port reusing existing standard drivers on most popular PC
operating systems as it has a USB CDC/ACM class compliant interface. Vendor driver is not required.
1. Windows 2000/XP/Vista/7/8 32 & 64 bit
UZB.INF & UZB.CAT are provided in the Z-Wave SDK that reuses the standard Windows usbser.sys or
usbser64.sys driver. The device appears in the Device Manager under the Ports section, and is accessible
through the Windows CreateFile API by applications as “//.//COMxxx” where xxx is the COM Port
number assigned by the OS.
2. Linux kernel 2.6.24+
The device appears as “/dev/ttyACMxx” where xxx is the tty number assigned by the OS.
3. MAC OS X 6.4
The device appears as “/dev/tty.usbmodemxxx” where xxx is the tty number assigned by the OS.
4.1.2 Inclusion (adding) and Exclusion (removing) modes
To communicate with the devices of Z-Wave network, the necessary device needs to be added to an
existing wireless network. The process of adding devices into Z-Wave network is called Inclusion. The process of
removing devices from this network is called Exclusion.
Both processes are initiated by the primary controller of the Z-Wave network.
4.1.3 Resetting the Z-Wave USB Stick
To reset the Z-Wave USB Stick to the default settings, press the Set Default button on GUI.

____________________________________________________________________________________
6 ELTEX Z-Wave STICK. User manual
5TECHNICAL SUPPORT
Contact Eltex Service Centre to receive technical support on operation of our products:
Okruzhnaya Str. 29V, Novosibirsk, Russian Federation, 630020
Technical Support phone numbers:
[phone],
[phone],
E-mail: [email protected]k.ru
Visit Eltex official website to get relevant technical documentation and firmware, benefit from our knowledge
base, or consult a Service Centre Specialist in our technical forum.
Our official website: http://eltex-co.ru
Technical forum: http://eltex-co.ru/forum
Knowledge base: http://kcs.eltex.nsk.ru/
Download Centre: http://eltex-co.ru/support/downloads