Elytone EMA?120704?2U User manual

1
PoweronModeselector3positions:12V,Audio,ON
Inputsourceselector3positions:LINEIN,GlobalA,GlobalB
LEVEL/Volume:R,L2Channel/oneLEVEL/Volumeswitch.
OutputFunction2Positions:STEREO,BRIDGEmode
PowerKeyButton:Poweron/offselector
PowerLED:Poweron/off/stand‐bymodeindicator
ChannelLED:AllChannelsstateindicator










2.1ACPOWERSWITCH:
ACPoweron/off:Turnon/offwithACPowerSwitch

2.2.PoweronMode‐3Positions:12VTrigger,Audio,ON

12V:12VTrigger(power)modeisexternalcontrolpowerfeature.EMA–12070ispowered
fromexternal12VDC.Without12Vinputpowerprovidedafter10mins,thedevicewillgo
intopower‐offmode.

AUDIO:Audio:Audio(power)modeisthatthepoweron/offmodeandstand‐bymodeare
controlledbyPowerKeybuttonandAudiosensingcontrol.

AfteritisswitchedonbypressingPowerKeyButton,thedeviceissupposedtodetectallau‐
diosignalsandthengointoPowerOnmodeonceitreceivesanysignal(s);Thedevicegoes
intoPowerOffmodebypressingPowerKeyButton.

ThisdevicewillgointoStand‐bymode10minsafterthelastaudiosignalhasbeengone.
Multi Channel Amplifier OperatingInstructions
EMA‐120704‐2U/EMA‐61508
1.FunctionInstruction:
2.OperatingInstructions:

2
ON:Onmodeisthatswitchingon/offthedevicebypressingPowerKeybutton.The
devicegoesintoPowerOnmodebypressingPowerKeyButton;whileitgoesinto
PowerOffmodebypressingPowerKeyButtonagain.

2.3Inputsourceselector3positions:LINEIN,GlobalA,GlobalB
LINEIN:Audiosignalinput(s)shouldconnectwithCH1‐12 RCA JACK separatelyand
audioinputselectorsareswitchedtoLineINposition.Thechanneloutputwillprovide
LINEINoutputsignal(s).

GlobalA:Audiosignalinput(s)shouldconnectwithGlobalARCAJACKandaudioin‐
putselectorareswitchedtoGlobalAposition.ThechanneloutputwillprovideGlobal
Aoutputsignal(s).

GlobalB:Audiosignalinput(s)shouldconnectwithGlobalARCAJACKandaudioinput
selectorareswitchedtoGlobalBposition.ThechanneloutputwillprovideGlobalB
outputsignal(s).

2.4LEVEL/Volume:
‐Every2channels(R/L)usethesameLEVEL/Volumecontrolswitch.
2.5OutputFunction2Positions:STEREO.BRIDGE
STEREO:WhenOutputFunctionSelectorisswitchedtoSTEREOmode ,thisdevicepro‐
vides 70W4Ω 12 Channel output. 
BRIDGE:WhenOutputFunctionSelectorisswitchedtoBRIDGEmode ,thisdevicepro‐
vides 150W8Ω6 Channel output.

2.6PowerkeybuttonandLED:
BluecolorLED:Poweronmode
RedcolorLED:PowerofforAudioStand‐bymode

2.7ChannelLEDAllChannelsstateindicator
TheLEDsonthefrontpanelindicatetheamplifiersoperatingstate.Eachchannelhas
oneLED,foreachzone.



3

CH1‐12:GreencolorLED:Thedevicewillautomaticallyturnoffthechannel
AMPoutputandthatChannelLEDlightwillbeoff5minsafternoanyAu‐
diosourceonthatchannelisdetected..

CH1‐12:IfanyAMPOutputisinprotectmode,itsChannelLEDlightwill
blinkgreenlighttoindicatethischannelisinprotectmode;Whilethepro‐
tect modeisoff,thedevicewill resumenormaloperation.