Embedded Artists LPC3250 User manual

Embedded Artists AB
Södra Promenaden 51
SE-211 38 Malmö
Sweden
Phone/Fax: [phone]
E-mail: [email protected]
http://www.embeddedartists.com
© Copyright 2010 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Embedded Artists’
LPC3250 OEM Board v1.5 DS
The Art of Embedded Systems Development –made Easy™
Document status: Preliminary
LPC3250 OEM Board Feature Highlights
The LPC3250 OEM Board provides a quick and easy solution for
implementing a high-performance ARM ARM926EJ-S based design
around the LPC3250 from NXP.
Build around NXP's ARM926EJ-S LPC3250 microcontroller
with 256Kbyte internal SRAM
64MByte external DDR SDRAM, via 16-bit databus
128 Mbyte NAND FLASH
4 MByte SPI-NOR FLASH
100/10Mbps Ethernet interface based on DP83848 ETH-PHY
On-board ISP1301 USB OTG transceiver
13.000 MHz and 32.768 kHz crystals for LPC3250
32Kbyte I2C E2PROM for storing non-volatile parameters
Buffered 16-bit data bus with voltage translation to external bus
(VCCEXT can be 1.4-3.6V)
+3.3V powering
200 pos expansion connector
(as defined in popular SO-DIMM industry standard), 0.6mm pitch
Compact design with dimensions: 68 x 50 mm
Support Highlights
Access to Embedded Artists support page containing
oSchematics
oUser’s Manual
oSample software applications
oOEM Board Integration Guide
Supported by Developer’s Kit, see picture to right
Volume discount available
Customization service available for optimized high-volume design
Block Diagram of LPC3250 OEM Board
NXP Partner
Embedded Artists is a partner of NXP. Together we give engineers an excellent base to work
from when creating advanced embedded systems. We have a close co-operation and know
everything there is to know about the NXP processors. Take advantage of our unique knowledge!
For further information, please contact: [e-mail]
ETH, USB, I2C, GPIO, Buffered memory bus, power, etc.
LPC3250
Parallel
NAND (3.3V)
Buffers
1.8V-to-VCCEXT
16-bit DDR
SDRAM
(1.8V)
SPI-
FLASH
Ethernet-
PHY
I2C-E2PROM
13MHz
32.768kHz
crystals
USB OTG
transceiver
Adj VCORE
(LTC3447)

Embedded Artists AB
Södra Promenaden 51
SE-211 38 Malmö
Sweden
Phone/Fax: [phone]
E-mail: [email protected]
http://www.embeddedartists.com
© Copyright 2010 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Embedded Artists’
LPC3250 OEM Board v1.5 DS
The Art of Embedded Systems Development –made Easy™
Document status: Preliminary
Absolute Maximum Ratings
Stress above these limits may cause permanent damage to the board.
Technical Data
[1] Extended temperature range can be supplied on request. Subject to minimum order volume.
[2] Requires VDDcore to be 1.35V.
[3] Temperature range planned to be extended after passing Embedded Artists internal qualification process.
Mechanical Dimensions
Board width according to SO-DIMM standard: 67.6 mm. Board height (top and bottom) according to picture below:
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can
discharge without detection. Although this product features ESD protection damages may
occur on devices subjected to high energy ESD. Therefore, proper ESD precaution should be
taken to avoid performance degradation or loss of functionality.
Parameter
Rating
VDD to GND (Supply voltage)
-0.2V to +4V
Digital/Analog Input/Output Voltage
-0.2V to VDD+0.2V
Storage temperature
-40°C to 100°C
Parameter
Min
Typical
Max
VCC Supply voltage
Ripple with frequency contents < 100kHz
Ripple with frequency contents ≥ 100kHz
3.10V
3.30V
3.50V
50mV
10mV
VCCEXT Supply voltage
1.40V
3.60V
Supply current
- idle, 32kHz RTC active
- low-power mode (13 MHz)
- executing from internal SRAM (266 MHz)
- executing from external SDRAM (266MHz)
- Ethernet+usb active
TBD
TBD
TBD
TBD
TBD
Max observed
VBAT current
TBD
Operating temperature[1]
- 208 MHz core frequency
- 266 MHz core frequency[2]
0°C
5°C[3]
60°C
40°C[3]
Relative Humidity (RH)
0°C < TA≤50°C, non-condensing
50°C < TA≤60°C, non-condensing
60°C < TA≤70°C, non-condensing
5%
5%
5%
80%
50%
35%
Top side components
Bottom side components
50.0 mm
4.8 mm
1.2 mm
2.6 mm

Embedded Artists AB
Södra Promenaden 51
SE-211 38 Malmö
Sweden
Phone/Fax: [phone]
E-mail: [email protected]
http://www.embeddedartists.com
© Copyright 2010 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Embedded Artists’
LPC3250 OEM Board v1.5 DS
The Art of Embedded Systems Development –made Easy™
Document status: Preliminary
Pin Information
Note that each LPC3250 pin can have more functions than indicated in table below. See datasheet for details.
SO-
DIMM
pins
I/O, Application Details
Connected to
SO-
DIMM
pins
I/O, Application Details
Connected to
1
A, Ethernet TXP
Ethernet-PHY
101
P, GND
2
A, Ethernet RXP
Ethernet-PHY
102
P, GND
3
A, Ethernet TXN
Ethernet-PHY
103
B
LPC3250, I2S1TX_CLK
4
A, Ethernet RXN
Ethernet-PHY
104
B
LPC3250, I2S1TX_SDA
5
P, VDD3_3A
105
B
LPC3250, I2S1TX_WS
6
P, GND
106
B, GPIO
LPC3250, P0.0
7
OD, ETH-LED1
Ethernet-PHY
107
B, GPIO
LPC3250, P0.1
8
OD, ETH-LED2
Ethernet-PHY
108
I, GPI
LPC3250, GPI_00
9
10
P, VBAT-IN
LPC3250, RTC powering
109
B, I2C-SDA
LPC3250, I2C2_SDA
10
O, ONSW
LPC3250,ONSW
110
O, I2C-SCL
LPC3250,I2C2_SCL
11
I, RESET-IN
LPC3250, RESET via buffer
111
I, GPI
LPC3250, GPI_04
12
O, RESET-OUT
LPC3250, RESOUT
112
I, GPI
LPC3250, GPI_06
13
I, ETH-PHY-PD
Ethernet-PHY, power down
113
A
ISP1301, USB_ID
14
I, DBGEN
LPC3250, dbgen
SPIFI CS control
114
I
LPC3250, POWER_ON Vcore
15
I, TCK
LPC3250, jtag-tck
115
O
LPC3250, TST_CLK2
16
O, RTCK
LPC3250, jtag-rtck
116
B, GPIO
LPC3250, P2.7
17
I, TRST
LPC3250, jtag-trst
117
B, GPIO
LPC3250, GPIO_00
18
I, TMS
LPC3250, jtag-tms
118
B, GPIO
LPC3250, GPIO_01
19
I, TDI
LPC3250, jtag-tdi
119
I, GPI
LPC3250, GPI_07
20
O, TDO
LPC3250, jtag-tdo
120
B, GPIO
LPC3250, P2.0
21
P, V3A
LPC3250, vdda
121
B, GPIO
LPC3250, P2.1
22
NC
122
B, GPIO
LPC3250, P2,2
23
P, VSSA
LPC3250, vssa
123
B, GPIO
LPC3250, P2.3
24
P, GND
124
B, GPIO
LPC3250, P2.4
25
O, GPO
LPC3250, GPO_10
125
B, GPIO
LPC3250, P2.5
26
O, GPO
LPC3250, GPO_12
126
B, GPIO
LPC3250, P2.6
27
O, GPO
LPC3250, GPO_13
127
O, GPO
LPC3250,GPO_07
28
O, GPO
LPC3250, GPO_15
128
O, GPO
LPC3250,GPO_21
29
O, GPO
LPC3250, GPO_16
129
P, GND
30
O, GPO
LPC3250, GPO_18
130
P, GND
31
B, GPIO
LPC3250, P0.2
131
O, Buffered Address bus 15
LPC3250, A15 via buffer
32
B, GPIO
LPC3250, P0.3
132
O, Buffered CS3
LPC3250, CS3 via buffer
33
B, GPIO
LPC3250, P0.4
133
O, Buffered Address bus 14
LPC3250, A14 via buffer
34
B, GPIO
LPC3250, P0.5
134
O, Buffered CS2
LPC3250, CS2 via buffer
35
I, GPI
LPC3250, GPI_01
135
O, Buffered Address bus 13
LPC3250, A13 via buffer
36
I, GPI
LPC3250, U7_HCTS
136
O, Buffered CS1
LPC3250, CS1 via buffer
37
P, VCC
137
O, Buffered Address bus 12
LPC3250, A12 via buffer
38
P, GND
138
O, Buffered CS0
LPC3250, CS0 via buffer
39
P, VCC
139
O, Buffered Address bus 11
LPC3250, A11 via buffer
40
P, GND
140
O, Buffered BLS1
LPC3250, BLS1 via buffer
41
NC
141
O, Buffered Address bus 10
LPC3250, A10 via buffer
42
A, USB2-DP
LPC3250, USB-D+
142
O, Buffered BLS0
LPC3250, BLS0 via buffer
43
NC
143
O, Buffered Address bus 9
LPC3250, A9 via buffer
44
A, USB2-DM
LPC3250, USB-D-
144
O, Buffered WE
LPC3250, WE via buffer
45
O
LPC3250, GPO_06
145
O, Buffered Address bus 8
LPC3250, A8 via buffer
46
O
LPC3250, PWMOUT2
146
O, Buffered OE
LPC3250, OE via buffer
47
O
LPC3250, U6_IRTX
147
O, Buffer Address bus 7
LPC3250, A7 via buffer
48
I, GPI
LPC3250, U6_IRRX
148
O, Buffer Address bus 23
LPC3250, A23 via buffer
49
O
LPC3250, U5_TX
149
O, Buffer Address bus 6
LPC3250, A6 via buffer
50
I, GPI
LPC3250, U5_RX
150
O, Buffer Address bus 22
LPC3250, A22 via buffer
51
O, GPO
LPC3250, GPO_02
151
O, Buffer Address bus 5
LPC3250, A5 via buffer

Embedded Artists AB
Södra Promenaden 51
SE-211 38 Malmö
Sweden
Phone/Fax: [phone]
E-mail: [email protected]
http://www.embeddedartists.com
© Copyright 2010 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Embedded Artists’
LPC3250 OEM Board v1.5 DS
The Art of Embedded Systems Development –made Easy™
Document status: Preliminary
52
O, GPO
LPC3250, GPO_03
152
O, Buffer Address bus 21
LPC3250, A21 via buffer
53
O, GPO
LPC3250, GPO_08
153
O, Buffer Address bus 4
LPC3250, A4 via buffer
54
O, GPO
LPC3250, GPO_09
154
O, Buffer Address bus 20
LPC3250, A20 via buffer
55
O
LPC3250, PWMOUT1
155
O, Buffer Address bus 3
LPC3250, A3 via buffer
56
O
LPC3250, HICORE
156
O, Buffer Address bus 19
LPC3250, A19 via buffer
57
O
LPC3250, U1_TX
157
O, Buffer Address bus 2
LPC3250, A2 via buffer
58
I, GPI
LPC3250, U1_RX
158
O, Buffer Address bus 18
LPC3250, A18 via buffer
59
I
ISP1301, USB_VBUS_CTRL
159
O, Buffer Address bus 1
LPC3250, A1 via buffer
60
O, GPO
LPC3250, GPO_17
160
O, Buffer Address bus 17
LPC3250, A17 via buffer
61
O, GPO
LPC3250, GPO_20
161
O, Buffer Address bus 0
LPC3250, A0 via buffer
62
O
LPC3250, SPI1_CLK
162
O, Buffer Address bus 16
LPC3250, A16 via buffer
63
O, GPO
LPC3250, GPO_04
163
NC
64
B
LPC3250, SPI1_DATIN
164
I, ABUF_EN
Connected to GND on board
65
B
LPC3250, SPI1_DATIO
165
P, Buffer-VCC
66
O, GPO
LPC3250, GPO_05
166
P, GND
67
O, GPO
LPC3250, GPO_11
167
B, Buffer Data bus 15
LPC3250, D15 via buffer
68
A
LPC3250, TS_XP
168
I, GPI
LPC3250, GPI_08
69
A
LPC3250, TS_YP
169
B, Buffer Data bus 14
LPC3250, D14 via buffer
70
A
LPC3250, AIN1
170
O, GPO
LPC3250, GPO_23
71
A
LPC3250, AIN2
171
B, Buffer Data bus 13
LPC3250, D13 via buffer
72
A
LPC3250, AIN3
172
I, GPI
LPC3250, GPI_09
73
O, GPO
LPC3250, GPO_00
173
B, Buffer Data bus 12
LPC3250, D12 via buffer
74
B, I2C-SDA
LPC3250, I2C1_SDA
174
I, GPI
LPC3250, GPI_19
75
B, I2C-SCL
LPC3250, I2C1_SCL
175
B, Buffer Data bus 11
LPC3250, D11 via buffer
76
P, GND
176
B, GPIO
LPC3250, P2.8
77
P, GND
177
B, Buffer Data bus 10
LPC3250, D10 via buffer
78
B
LPC3250, MCICLK
178
B, GPIO
LPC3250, P2.9
79
B
LPC3250, MCICMD
179
B, Buffer Data bus 9
LPC3250, D9 via buffer
80
O, GPO
LPC3250, GPO_01
180
B, GPIO
LPC3250, P2.10
81
B
LPC3250, MCIDAT0
181
B, Buffer Data bus 8
LPC3250, D8 via buffer
82
B
LPC3250, MCIDAT1
182
B, GPIO
LPC3250, P2.11
83
B
LPC3250, MCIDAT2
183
B, Buffer Data bus 7
LPC3250, D7 via buffer
84
B
LPC3250, MCIDAT3
184
B, GPIO
LPC3250, P2.12
85
B, GPIO
LPC3250, GPIO_05
185
B, Buffer Data bus 6
LPC3250, D6 via buffer
86
O, GPO
LPC3250, GPO_14
186
I, GPI
LPC3250, GPI_28
87
I, GPI
LPC3250, GPI_03
187
B, Buffer Data bus 5
LPC3250, D5 via buffer
88
B, GPI
LPC3250, U7_RX
188
O
LPC3250, U2_TX
89
O
LPC3250, U7_TX
189
B, Buffer Data bus 4
LPC3250, D4 via buffer
90
B, GPIO
LPC3250, P0.6
190
I, GPI
LPC3250, GPI_17
91
B, GPIO
LPC3250, P0.7
191
B, Buffer Data bus 3
LPC3250, D3 via buffer
92
O, GPO
LPC3250, GPO_22
192
I, GPI
LPC3250, GPI_05
93
B
LPC3250, SYSCLKEN
193
B, Buffer Data bus 2
LPC3250, D2 via buffer
94
B
LPC3250, SPI2_DATIO
194
I, GPI
LPC3250, GPI_16
95
B, GPI
LPC3250, SPI2_DATIN
195
B, Buffer Data bus 1
LPC3250, D1 via buffer
96
B, GPIO
LPC3250, GPIO_04
196
I, GPI
LPC3250, GPI_18
97
B
LPC3250, SPI2_CLK
197
B, Buffer Data bus 0
LPC3250, D0 via buffer
98
A
ISP1301, USB_VBUS
198
O
LPC3250, U3_TX
99
I, GPI
LPC3250, GPI_02
199
P, Buffer-VCC
100
O, GPO
LPC3250, GPO_19 connected
to NAND flash WP
200
P, GND
I/O legend
O: output
I: input
B: Bidirectional
P: Power
A: Analog
OD: Open-drain output
GPIO: General purpose I/O
GPI: General purpose input
GPO: General purpose output

Embedded Artists AB
Södra Promenaden 51
SE-211 38 Malmö
Sweden
Phone/Fax: [phone]
E-mail: [email protected]
http://www.embeddedartists.com
© Copyright 2010 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Embedded Artists’
LPC3250 OEM Board v1.5 DS
The Art of Embedded Systems Development –made Easy™
Document status: Preliminary
Disclaimers
Embedded Artists reserves the right to make changes to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This document supersedes and replaces all
information supplied prior to the publication hereof.
Customer is responsible for the design and operation of their applications and products using Embedded Artists’ products,
and Embedded Artists accepts no liability for any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Embedded Artists’ product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should
provide appropriate design and operating safeguards to minimize the risks associated with their applications and products.
Embedded Artists does not accept any liability related to any default, damage, costs or problem which is based on any
weakness or default in the customer’s applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using
Embedded Artists’ products in order to avoid a default of the applications and the products or of the application or use by
customer’s third party customer(s). Embedded Artists does not accept any liability in this respect.
Embedded Artists does not accept any liability for erratas on individual components.
All Embedded Artists’ products are sold pursuant to Embedded Artists’ terms and conditions of sale:
http://www.embeddedartists.com/sites/default/files/docs/General_Terms_and_Conditions.pdf
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If
any part of this document refers to any third party products or services it shall not be deemed a license grant by Embedded
Artists for the use of such third party products or services, or any intellectual property contained therein or considered as a
warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property
contained therein.
UNLESS OTHERWISE SET FORTH IN EMBEDDED ARTISTS’ TERMS AND CONDITIONS OF SALE EMBEDDED
ARTISTS DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF
EMBEDDED ARTISTS PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF
ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY
RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY THE CEO OF EMBEDDED ARTISTS, PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, NUCLEAR, LIFE
SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR
MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL
DAMAGE.
Resale of Embedded Artists’ products with provisions different from the statements and/or technical features set forth in this
document shall immediately void any warranty granted by Embedded Artists for the Embedded Artists’ product or service
described herein and shall not create or extend in any manner whatsoever, any liability of Embedded Artists.
This document as well as the item(s) described herein may be subject to export control regulations. Export might require a
prior authorization from national authorities.
Definition of Document Status
Preliminary –The document is a draft version only. The content is still under internal review and subject to formal approval,
which may result in modifications or additions. Embedded Artists does not give any representations or warranties as to the
accuracy or completeness of information included herein and shall have no liability for the consequences of use of such
information. The document is in this state until the product has passed Embedded Artists product qualification tests.
Approved –The information and data provided define the specification of the product as agreed between Embedded Artists
and its customer, unless Embedded Artists and customer have explicitly agreed otherwise in writing.