Embr Labs Embr Wave User manual

USER MANUAL VERSION 3.0
WELCOME!
Please read and keep this User Manual and take the
time to carefully read and follow the Important
Safety Instructions.
Welcome to Embr Wave!
Embr Wave is a thermal wristband that provides
thermal relief at the touch of a button.
Whenever you’re feeling uncomfortably warm or
cold, simply hold down the Light Bar for a session of
cool or warmth.
Embr Wave provides warming or cooling in the form
of rhythmic waves that are designed to maximize
your thermal comfort. Use this sensation to warm
up or cool down — anytime, anywhere.
What’s in the box?
Your Embr Wave box includes:
• Embr Wave thermal wristband
• Micro USB charging cable
• Storage pouch
• Quickstart guide

Want cool?
Hold here.
Want warmth?
Hold here.
2. ACTIVATING EMBR WAVE
warmer
colder
3. ADJUSTING THE TEMPERATURE
There are multiple levels of warming and cooling.
During operation, you can hold down the left side of
the Light Bar to lower the temperature, or the right
side to raise it.
For finer adjustments, you can also click the left or
right side of the Light Bar.
When in Warming Mode, Embr Wave will glow red.
When in Cooling Mode, it will glow blue.
When you’ve reached the maximum cooling or
warming temperature, the Light Bar will blink to let
you know!
Turning on and off
1. Click anywhere on the Light Bar to wake up the
device. The Light Bar will turn on.
2. Hold down the left (blue) side of the Light Bar to
start cooling, or the right (red) side to start warm-
ing. Release when the device has reached a pleasant
temperature.
3. Each cooling session lasts 3 minutes. Each
warming session lasts 5 minutes. You can repeat
sessions any time.
4. To turn off, firmly press the middle of the light
bar until you feel both sides click.
PRO TIP: If your session has ended in the last few
minutes, you can reactivate it by double-tapping the
aluminum body with your knuckle.

5. THE LIGHT BAR, CONTINUED
4. UNDERSTANDING THE LIGHT BAR
Embr Wave is
ramping to a
nice temperature.
The Light Bar will indicate the
status of your Embr Wave.
Initialization
When you hold down the left
(or right) side of the Light Bar,
Embr Wave will ramp up to
increasingly strong cooling (or
warming). The Light Bar will
animate to show that Embr
Wave is ramping up.
Temperature waves
Because the human body is more sensitive to tem-
perature contrast than to static temperatures, Embr
Wave cools and warms in rhythmic waves.
PRO TIP: If you look closely, you’ll notice that the
Light Bar pulses brighter and dimmer to show you
the rhythm of the thermal waves.
Occasionally, Embr Wave will not be able to fulfill a
temperature request.
Too cold to start
If the device is too cold, a yellow and cyan light pat-
tern will slowly fade in and out to indicate that it
needs to warm up — wear it against your skin for a
few seconds, and you should be all set!
Too warm to start
If Embr Wave is too hot to start a session, a yellow
and orange light pattern will slowly fade in and out.
Let it rest 3-5 minutes, or until the Light Bar turns
back off.
Overheated
If your device overheats, the entire Light Bar will
flash orange and red. If this happens, wait to use
your Embr Wave until it has cooled down.
Low battery
When the Light Bar flashes orange, Embr Wave is
running low on battery.

7. TIPS FOR WARMING
6. TIPS FOR COOLING
Finite cooling
When in Cooling Mode, the top of the device may get
warm, because Embr Wave is pulling heat away
from your skin. For best results:
1. Avoid touching the metal during Cooling Mode.
2. Think of Embr Wave as a friend who is working
hard for you and may need rest for 3-5 minutes be-
tween cooling sessions.
3. Let Embr Wave breathe! Leave the metal body un-
covered to facilitate heat dissipation (e.g., not under
your sleeve).
4. Wear the wristband loosely while you aren’t ac-
tively cooling.
In Warming Mode, you want to keep as much heat in
as possible!
1. For best results, insulate the device when in
Warming Mode (such as by covering the device with
your sleeve).
2. In both modes, if you double-tap the device with
your knuckle during a session, it will toggle to Ex-
tended Mode, which consists of intermittent pulses
over a 30 min session.
To access Extended Mode, you’ll need the latest
firmware and Embr Wave mobile app.
Double-tap to toggle Extended Mode (30 min).

8. CHARGING
Micro USB port
9. MOBILE APP
Why use the app?
1. The Embr Wave mobile app gives you an overview
of your recent usage of warming and cooling so that
you can better understand your comfort trends.
You’ll be able to view your daily usage, as well as
compare weekly usage with your personal baseline.
2. Based on your usage, the app also gives you
quick comfort tips.
3. The app also keeps your device updated by alert-
ing you about available software upgrades. We’ll
keep releasing periodic upgrades as our technology
continues to advance!
Before first use, you should charge Embr Wave.
To recharge Embr Wave, plug the included micro
USB cable into the port beneath the device. The
lights will gently pulse green, and will remain solid
green when charging is complete.
When fully charged, Embr Wave will have a battery
life of 20-50 cooling or warming sessions.
Note: Before charging, be sure the product is at
room temperature, between 0ºC and 45ºC.
Use the supplied USB
cable to connect Embr
Wave to a powered USB
port on your computer
or an agency-approved
wall charger (not sup-
plied).
Allow up to 1.5 hours
for a full charge.
Apple and the Apple logo are trademarks of Apple Inc., registered in the
U.S. and other countries. App Store is a service mark of Apple Inc., reg-
istered in the U.S. and other countries.
Google Play and the Google Play logo are trademarks of Google LLC.

10. IMPORTANT SAFETY INSTRUCTIONS 11. IMPORTANT SAFETY INSTRUCTIONS
Embr Wave is designed to provide thermal comfort, not to regu-
late body temperature. It is intended for use in moderate envi-
ronments, and it is not designed as a replacement for clothing,
air conditioning, or other traditional temperature solutions.
Embr Wave is a consumer product and not a medical device
intended to diagnose, treat, or cure any disease. If you have any
medical condition that you believe could be affected by Embr
Wave, consult with your physician prior to using the product. If
you experience adverse reactions, immediately remove the
system, stop using it, and consult with your physician.
Embr Wave is designed to be worn on the wrist only. Different
parts of the body have different thermal sensitivities. Use Embr
Wave on other body locations at your own risk.
The product’s warming feature should be used with care and
common sense. DO NOT use Embr Wave in temperature settings
that feel painful or uncomfortable. Exposure to hot surfaces may
cause pain or skin damage.
DO NOT use Embr Wave continuously for more than 4 hours.
Using the heating mode continuously for long periods may result
in the skin turning red due to prolonged heat exposure.
This product contains magnetic material. Consult your phy-
sician on whether this might affect your implantable medical
device.
DO NOT submerge or expose for extended periods to water or
wear while participating in water sports, i.e. swimming, water-
skiing, surfing, etc.
Do NOT use Embr Wave if you have open wounds, sores, rashes,
infection, or inflamed skin in or around the area of contact.
Consult with your doctor before using Embr Wave if you are preg-
nant. Keep this system out of the reach of children.
The Embr Wave band contains some nickel. Nickel exposure from
these materials is unlikely, but customers with known nickel
allergies should be attentive when wearing the product until they
can determine they are not experiencing an allergic reaction.
To reduce the risk of fire or electric shock, DO NOT expose the
product to rain or moisture. DO NOT subject the product to me-
chanical shock. DO NOT expose products containing batteries to
excessive heat (e.g. from storage in direct sunlight, fire or the
like).
DO NOT expose this apparatus to dripping or splashing, and do not
place objects filled with liquids such as vases, on or near the ap-
paratus. As with any electronic products, use care not to spill liq-
uids into any part of the system. Liquids can cause failure and/or a
fire hazard.
Charging temperature range: 0-45ºC. Discharging temperature
range: 0-60ºC. Use this product only with an agency approved
power supply which meets local regulatory requirements (e.g. UL,
CSA, VDE, CCC). DO NOT leave the product on prolonged charge
when not in use.
The product must not be discarded as household waste,
and should be delivered to an appropriate collection facility
for recycling. Proper disposal and recycling helps protect
natural resources, human health and the environment. For
more information on disposal and recycling of this product,
contact your local municipality or disposal service.

12. WARRANTY INFORMATION 13. WARRANTY INFORMATION
(a) Limited Warranty. The limited warranty set forth herein applies only to
the Buyer, may be acted upon only by the Buyer, and may not be assigned,
sold or transferred to any third party. Embr warrants only to the Buyer that,
for a period of one (1) year from delivery, the Product shall substantially
conform to Embr’s published specifications as of the date of shipment. The
limited warranty herein shall not apply to (i) any Product that has been cus-
tomized, altered or repaired by any person or entity other than personnel of
Embr or personnel specifically authorized by Embr, (ii) any Product that has
been subjected to abuse, misuse, damage, neglect, or accident beyond
Embr’s published limitations for the Product or other causes external to the
Products (including, without limitation, environmental conditions and power
conditions), (iii) use of the Product in combination with products or software
not supplied by Embr, (iv) any use or operation of the Product other than in
accordance with Embr’s then-current published specifications and instruc-
tions for the Product, or (v) any non-conformities or defects notified by
Buyer to Seller with respect to a Product after the expiration of the applica-
ble warranty period for such Product.
(b) Remedies. Buyer’s sole and exclusive remedy and Seller’s sole and
exclusive liability for a breach of this limited warranty shall be, at Seller’s
option, Seller’s use of its commercially reasonable efforts to repair or
replace the non-conforming Product. If Embr is unable, after reasonable
efforts, to repair or replace such substantially non-conforming Products,
Embr, may, at its sole discretion, elect to refund of an amount not to exceed
the actual payments received by Embr for such Product(s). Buyer shall not
return any Product to Embr without an Embr-issued RMA number; Buyer
shall contact Embr at hell[email protected] to request a return and to obtain
directions for returns of Products. Shipping costs and the risk of loss for a
returned defective Product with a proper RMA number shall be borne by
Embr, and Embr shall assume the risk of loss while the Product is in the
Embr facility. Products that are repaired or replaced by Embr shall be cov-
ered by this limited warranty for the remaining warranty period for such
original Product.
(c) Disclaimers. THIS LIMITED WARRANTY IS IN LIEU OF ANY OTHER WAR-
RANTY, WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL (INCLUDING,
WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT) WITH RESPECT
TO THE PRODUCTS, THE MANUFACTURE, SALE, SUPPLYING OR FAILURE
OR DELAY IN SUPPLYING OF THE PRODUCTS, SERVICES RELATED THERE-
TO OR THE USE, RESULTS OR DISPOSITION OF THE PRODUCTS. EMBR
EXPRESSLY DISCLAIMS ALL WARRANTIES (WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL) WITH RESPECT TO THE RESULTS OBTAINED
FROM THE PRODUCT. OUR PRODUCTS DO NOT PROTECT YOU FROM
OVERHEATING OR ANY OTHER HEALTH OR SAFETY RISKS. YOU ARE
SOLELY RESPONSIBLE FOR MAINTAINING YOUR OWN HEALTH AND
SAFETY.

Made and imported by Embr Labs, Inc
285 Washington St Ste C, Somerville MA, 02143 USA
embrlabs.com
Need help?
Contact our support team: [email protected]
We’d love to hear from you!
14. REGULATORY INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Changes or modifications not expressly approved by Embr
Labs could void the user's authority to operate the equipment.
This device complies with Industry Canada’s licence-exempt RSSs. Opera-
tion is subject to the following two conditions: (1) This device may not cause
interference; and (2) This device must accept any interference, including
interference that may cause undesired operation of the device. Le présent
appareil est conforme aux CNR d’Industrie Canada applicables aux appar-
eils radio exempts de licence. L’exploitation est autorisée aux deux condi-
tions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utili-
sateur de l’appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d’en compromettre le fonctionnement.
This product conforms to all applicable EU directive requirements.
Model: Embr Wave
FCC ID 2ANTG-WAVE1
IC: 23206-WAVE1