Emdoor EM-T60 User manual

1
Rugged Handheld
EM-T60
Quick Start Guide

2
Thank you for your choosing the product.
This guide serves to enable users to get to know and familiar with our product as soon as
possible. Here we have made a brief introduction to the key layout and definitions in figures
and words.
Attention：
This user guide is based on andriod 10 edition
This user guide is an introduction for full function tablet. Your device may not
have all functions.
The illustrations in this manual may differ from the actual product.

3
Contents
Ⅰ. Use of the previous note .....................................................................................4
Ⅱ. Key Layout and Definitions ......................................................................... 5-6
Ⅲ. Introduction to Desktop ............................................................................... 7-28
Ⅳ.Use Warning ................................................................................................ 29-31

4
Ⅰ. Use of the previous note
1. With the wrong type of battery replacement will be explosive danger, be sure to use
the original battery.
2. The company shall not take any responsibility for the loss or removal of the
information in the tablet, which is caused by the operation, maintenance or other
accidents of the non-normal operation of the software and hardware.
3. Please backup your important information at any time.
4. Please do not disassemble the product; otherwise it will lose the right to guarantee.

5
Ⅱ. Key Layout and Definitions
○
1LCD/ Touch screen : LCD display and Touch screen.
○
2Indication LED : Boot charge indication
○
3Light sensor：Perception of external pipeline strength, electrical signal
to CPU
④Front Camera: Camera, video.
○
5○ 6VOL +:Turn up the voice
○
7VOL - :Turn down the voice
○
8Power button: To start or close touch screen panel. You can also let
the computer to sleep or wake up from hibernation mode.
⑨Speaker: Built-in speaker, so you can hear the sound without
additional link equipment.
○
10 Type-C Port: Earphone、Charging and USB data transfer

6
○
11 /○ 12 POGO PIN : Link adaptable charging base.
○
13 /○ 14 Scan Head :Scanning the light of one bit code / two dimensional
code from here, pointing the light at one bit code / two dimensional code,
will display the scanning content in the APP.
○
15 User Defined Function Keys:The function of user-defined key is
provided by customers
○
16 TF Card: Data storage expansion
○
17 Rear Camera: Camera, video.
○
18 Flash Lamp：Add light source for rear camera

7
Ⅲ. Introduction to Desktop
One.Device initialized setting
1.Initial page：
1)press the power key to reboot the system as the below picture .you
can change the language setting. the click the start.
Language change

8
2)touch the start icon, then click skip for left picture and click skip
for the right picture.
3)click CONTINUE for left picture and click NEXT for the right picture.

9
4)click NEXT for left picture and click Not now for the right picture.
5)click SKIP ANYWAY for left picture and click I AGREE for the right
picture.

10
2. Initial desktop ：slide the arrow up and go to the desktop,as below picture.