eMedia PLAY BANJO PACK User manual

Contents:
Banjo
Gig bag
2 finger picks
1 thumb pick
Beginning Banjo DVD
QuickStart Guide
Download your tuner at:
www.emediamusic.com/playbanjopacktuner
QuickStart Guide

How to Install the Bridge:
IMPORTANT – If there is any problem or question regarding this
instrument or software, please contact eMedia Music customer service
and technical support where your issues will be handled promptly
and knowledgeably. Call [phone] (9am to 5pm, Pacific Time)
or open a support ticket at: support.emediamusic.com
Please do not return to retailer
To avoid damage during shipping, the bridge is not installed
before it leaves the factory. (Your banjo is not broken.)
1) Find the bridge amongst the included accessories.
2) Slide it under the strings and position it so the distance
from the 12th fret is the same as the distance to the Nut.
This will give you an approximately correct position.
(The bridge is positioned perpendicular to the strings.)
3) Make sure each of the five strings falls into a groove on
the surface of the bridge. If the bridge has grooves of
varying width, orient the bridge so the grooves match the
string thickness. You may need to flip the bridge around
180 degrees. As you tune your banjo, the tension of the
strings keeps the bridge in place.
Groove

12th Fret
Bridge
Tuners
Nut
Distance to bridge = Distance to nut

Download your tuner at:
www.emediamusic.com/playbanjopacktuner
eMedia Music Corp. · 664 NE Northlake Way · Seattle, WA 98105 · [phone]
© 2015 eMedia Music Corp. All rights reserved.
EB05123QS