EMEET HS100 User manual
Button display
01
Enable/Disable
ambient sound
Multi-function
Volume up
Volume down
④
⑤⑥
③
Turn O/On
OFF
①
Mute/Unmute
microphone
(during a call)
②
Buttons and Functions
Right earcup
Left earcup
OperationButton Function
Slide to “ ” Turn headset on
Slide to turn O Turn headset o
Slide and hold for 2s in the
Bluetooth position Pair Bluetooth device
Slide to Bluetooth Check battery level (when headset is on)
Press Mute/Unmute microphone (during a call)
Press Volume up
Hold Next track
Press Volume down
Hold Previous track
Press Answer/End call
Hold Reject call
Press Play/Pause music
Double click Call back
Hold Volume+ and Volume-
at the same time for 10s Reset headset
Hold Volume+ and Multi-
function at the same time Steady Blue,busylight up
Press Enable/Disable ambient sound
02
④
④
①
⑤
⑤
⑥
②
③
③
③
LED Indicators
USB Adapter -- eMeet Adapter A300
StatusFunction LED
Charging Steady red
Fully charged Steady green
Low/Critically low Turns red
Medium Turns yellow
Full Turns green
Bluetooth conn-
ected
Stays blue for 5s and then
turns o
Bluetooth pairing Flashes blue
Call in progress
Charging A
Battery status A
(indicated by charging
LED)
Bluetooth status B
Operational status C Auto blue
Dongle displayStatus
Flashes blue
Steady blue
Green
Flashes green
Steady red
Paired
Incoming call
Skype for Business
incoming call
Microphone muted
Flashes redHeadset low battery
Pairing
To re-pair headset to USB dongle,
please download eMeetLink
application from www.emeet.ai/e-
meetlink for settings.
03
C
A
B
Connection and Pairing
1.Connect to a PC
2.Pair a smart phone
Connect eMeet Adapter A300 to one of the PC's USB ports.
To re-pair headset to USB dongle, please download eMeetLink application for settings.
1. Slide and hold the On/O switch to the Bluetooth position until the LED flashes blue and voice guidance
is heard.
2.Select eMeet HS100 from the list of available Bluetooth devices on the smart phone.
BLUETOOTH eMeet HS100
04
OFF
Intelligent Wearing Detection
Power On/O
Slide the On/O switch to the On or O position to power the headset on or o.
Auto Pause
The headset utilizes embedded sensors to perform dierent operations based on whether or not the user is
wearing it.
Take o the headset when listening to music, playing music will be paused automatically.
Put the headset back on, music will be resumed automatically .
When there is an incoming call, wear the headset, call will be answered automatically.
Auto-mute of Microphone
During a call, the microphone will be automatically muted if you take o the headset. When you put the
headset back on, the microphone will be automatically unmuted.
Enable/Disable Intelligent Wearing Detection
Download eMeetLink to Enable/Disable Intelligent Wearing Detection.
05
OFFOFF
Enable/Disable Ambient Noise
When ambient noise is enabled, you will hear ambient noise, and the speaker and microphone will be
muted when you are on a call or listening to music.
Operational Status Indicator
During a call, the operational status indicator will turn blue automatically.
To manually turn the operational status indicator on/o, press Volume+ and the Multi-function button at
the same time.
Mute/Unmute Microphone
When using the headset during a call, rotate the microphone to mute/unmute it.
01:25
01:25
06
+
ActionStatus Function
Press the Multi-function
button
Answer incoming call and
keep the current call active
Press the Multi-function
button
Switch between held call
and active call
Hold the Multi-function
button Reject incoming call
New incoming call when
a call is in progress
Two calls are answered,
with one held and one active
New incoming call when
a call is ongoing
Multiple Call Handling
The headset can answer and handle multiple calls simultaneously.
Auto Shutdown
When the headset is powered on, but not being worn, they will automatically shutdown after 8 hours to
conserve battery. To turn o this function, please download eMeetLink for settings.
Voice Guidance
Voice guidance are announcements that will guide you through set up, or will give you headphone status
updates (e.g. connection
and battery status).
By default, the voice guidance function is enabled. You may download eMeetLink to disable this
function.
Reset
Resetting the headset clears the list of paired devices and resets all settings.
Hold Volume+ and Volume- at the same time for 10s to restart the headset.
07
Download Application
Download the eMeetLink PC desktop app for software updates and other custom settings.
Maintenance
Store the headset in the accompanying pouch.
To avoid shortened battery life and battery drainage, do not store the headset in hot or cold places (such
as in an enclosed vehicle during summer or winter).
The operating temperature of the headset is between 0°C and 35°C.
Do not leave the headset unused and uncharged for extended periods. Charge the headset at least once
every three months.
www.emeet.ai/emeetlink www.emeet.ai/emeetlink
MacOSWindows
08
Table of contents
