Emerson Research CKS2021 User manual

OWNER’SMANUAL
CKS2021
Visitourweb siteatwww.emersonradio.com
DualAlarm AM/FMClock Radio
withSmartSet®
AutomaticTimeSetting System
(U.S.PatentNo.6,567,344)
CKS2021_ib062603.p65 26/6/2003, 14:3622

1
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
ORSHOCKHAZARD,DONOTEXPOSETHISAPPLIANCETORAINORMOISTURE.
IMPORTANTSAFETYINSTRUCTIONS
1.) Read these instructions.
2.) Keep these instructions.
3.) Heed all warnings.
4.) Follow all instructions.
5.) Do not use this apparatus near water.
6.) Clean only with dry cloth.
7.) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8.) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10.) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11.) Only use attachments / accessories specified by the manufacturer.
12.) Unplug this apparatus during lightning storms or when unused for long periods of time.
13.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
14.) This appliance shall not be exposed to dripping or splashing water and no object filled with
liquids such as vases shall be placed on the apparatus.
15.) Do not overload wall outlet. Use only power source as indicated.
16.) Use replacement parts as specified by the manufacturer.
17.) The product may be mounted to a wall only if recommended by the manufacturer.
18.) Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks.
CAUTION
!
CAUTION
RISK OFELECTRICSHOCK
DONOTOPEN
The lightning flashwitharrow-
head symbol,withinan equi-
lateraltriangleisintented to
alertthe usertothe presence
ofuninsulated‘dangerousvoltage’
withinthe product’s enclosure
thatmaybe ofsufficient
magnitude toconstitutearisk
ofelectricshock topersons.
The exclamation pointwithin
an equilateraltriangleisin-
tended toalertthe userto
the presenceofimportant
operating and maintenance
(servicing)instructionsin
the literatureaccompany-
ing the appliance.
WARNING:TOREDUCETHE
RISK OFELECTRICSHOCK
DONOTREMOVE COVER
(ORBACK),NOUSER
SERVICEABLEPARTSINSIDE
REFERSERVICINGTO
QUALIFIEDSERVICE
PERSONNEL.
CKS2021_ib062603.p65 26/6/2003, 14:541

2
Congratulations!
And thankyou forpurchasing the SmartSet®Clock RadiofromEmerson Research.
SmartSet®isthe world’s firstand onlyLEDclock radiothatwill automaticallyset
itselftothe correct‘Year’,‘Month’,‘Date’,‘Day’,and ‘Time’assoon asyou plug itin.
The onlything you havetodo istell the SmartSet®whattimezone you arein,and
the builtincomputerdoeseverything elseforyou immediately.And notonlythe
firsttime,buteverytimethe powerisinterrupted aswell.
Weall knowhowannoying itistowakeup inthe morning and see the dreaded
flashing “12:00”displayon ourclocks orclock radios.Thismeansthatyourpower
wasinterrupted sometimeduring the nightwhileyou weresleeping and yourclock
doesn’tknowwhattimeitisanymore.Unfortunatelyitprobablyalsomeansthat
you arelateforwork,orforschool,again.ButwithyourSmartSetClock Radiothe
dreaded flashing “12:00”displayisathing ofthe past. The SmartSet®resetsitself
assoon asthe powerisrestored and getsyou up on time,everytime.
And ifthatisn’tenough,the SmartSet®computeralsoknowswhenDaylightSaving
Timebeginsand endsand itwill adjustitselfforthosechangesautomaticallyfor
the next99 years!Leap Yearstoo!And bestofall,the long lifelithiumbattery
backup batteryisalreadyinstalled inyourradio.You don’thavetoremembertoput
anew9-voltbatteryinyourradioevery6months.Undernormalcircumstancesthe
lithiumbatterycan lastforup to5years,and when itdoesneed tobe changed,a
lowbatteryindicatorwill comeon toletyou know.The CR2430 lithiumbatteryis
availablealmostanywherethatbatteriesaresold.
The SmartSet®alsogivesyou dualalarmsthatcan be settogo off on weekdays
only,weekendsonly,orall 7days.You can setone alarmtowakeyou up tobuzzer
Mondaythrough Fridaywhen you havetogetup early,and usethe second alarm
towakeyou up tosoft musicon Saturdayand Sundaywhen you can sleep in.
Somedayall clocks and clock radiosmaybe thissmart. Buttodaythe technology
isonlyavailablefromEmerson Research.
We’resureyou’ll be happyand amazed byyourSmartSet®Clock Radio,and thatit
will giveyou manyyearsofenjoymentand dependableservice.
Onceagain,all ofusatEmerson Researchthankyou foryourpurchase.
Forfuturereference,recordthe SerialNumberinthe spaceprovided:
ModelNo:CKS2021
SerialNo:
CKS2021_ib062603.p65 26/6/2003, 14:542

3
IMPORTANTNOTES
•Operatecontrolsand switchesas
described inthe manual.
•Beforeturning on the power,make
certainthatthe powercordisproperly
installed.
•When moving the set, be suretofirst
disconnectthe ACpowercord.
•Avoidinstalling thisunitinplaces
exposed todirectsunlightorcloseto
heatradiating appliancessuchas
electricheaters,on top ofotherstereo
equipmentthatradiatestoo much
heat,placeslackingventilation ordusty
areas,placessubjecttoconstant
vibration and/orhumidormoistareas.
FCC INFORMATION
Thisequipmenthasbeen tested and found tocomplywiththe limitsforaClass B
digitaldevice,pursuanttoPart15 ofthe FCC Rules.Theselimitsaredesigned to
provide reasonableprotection againstharmfulinterferenceinaresidential
installation.Thisequipmentgenerates,uses,andcan radiateradiofrequencyenergy
and,ifnotinstalledand usedinaccordancewiththeinstructions,maycauseharmful
interferencetoradiocommunications.However,thereisno guarantee that
interferencewill notoccurinaparticularinstallation.If thisequipmentdoescause
harmfulinterferencetoradioortelevision reception,whichcan be determined by
turning the equipmentoff and on,the userisencouraged totrytocorrectthe
interferencebyone ormoreofthe following measures:
•Reorientorrelocatethe receiving antenna.
•Increasethe separation between the equipmentand receiver.
•Connectthe equipmentintoan outleton acircuitdifferentfromthattowhich
the receiverisconnected.
•Consultthe dealeroran experienced radio/TVtechnician forhelp.
ThisdevicecomplieswithPart15 ofthe FCC Rules.Operation issubjecttothe
following twoconditions:
(1)Thisdevicemaynotcauseharmfulinterference,and
(2)Thisdevicemustacceptanyinterferencereceived,including interference
thatmaycauseundesired operation.
CKS2021_ib062603.p65 26/6/2003, 14:543

4
UNPACKINGAND SETUP
•Removethe radiofromthe carton and removeall packing materialfromthe
radio.Wesuggestthatyou savethe packing material,ifpossible,inthe unlikely
eventthatyourradioeverneedstobe returned forservice.The originalcarton
and packing materialisthe onlysafewaytopack yourradiotoprotectitfrom
damage intransit.
•Removeanydescriptivelabelsorstickerson the frontortop ofthe cabinet.Do
notremoveanylabelsorstickersfromthe back orbottomofthe cabinet.
•Notethe serialnumberon the bottomofyourradioand writethisnumberinthe
spaceprovided on Page 2ofthismanual.
•Placeyourradioon alevelsurfacesuchasatable,desk orshelf, convenient
toan ACoutlet, outofdirectsunlight, and awayfromsourcesofexcess heat,
dirt, dust, moisture,humidity,orvibration.
•Unwind the ACpowercordand extend ittoitsfull length.The FMantenna is
builtintothiscord.It mustbe fullyextended toprovide the bestFMreception.
PROTECT YOUR FURNITURE !!
Thismodelisequipped withnon-skidrubber'feet'topreventthe product
frommoving when you operatethe controls.These'feet'aremade from
non-migrating rubbermaterialspeciallyformulated toavoidleaving any
marks orstainson yourfurniture.Howevercertaintypesofoil based
furniturepolishes,wood preservatives,orcleaning sprays maycausethe
rubber'feet'tosoften,and leavemarks orarubberresidue on the furniture.
Topreventanydamage toyourfurniturewestronglyrecommend thatyou
purchasesmall self-adhesivefeltpads,availableathardwarestoresand
homeimprovementcenterseverywhere,andapplythesepadstothebottom
ofthe rubber'feet'beforeyou placethe producton fine wooden furniture.
PREPARATIONFORUSE
CKS2021_ib062603.p65 26/6/2003, 14:544

5
POWERSOURCE
Thisradioisdesigned tooperateon normal120V60HzACpoweronly.Donot
attempttooperatethe radioon anyotherpowersource.You couldcausedamage
tothe radiothatisnotcovered byyourwarranty.
Thisradioshouldbe connected toanACoutletthatisalways ‘live’.Donotconnect
ittoan outletthatiscontrolled byawall switch.When the powertothe radiois
interrupted,the builtinlithiumbatterytakesovertomaintainthe timeand alarm
settings.Tomaximizethe lifeofthe lithiumbatterykeep the radioconnected toa
‘live’ACoutletatall times.
You will notethatthissystemisequipped withapolarized ACpowerplug having
one blade widerthan the other.Thisisasafetyfeature.If thisplug doesnotfitinto
yourexisting ACoutlet, do nottrytodefeatthissafetyfeaturebyfiling the wide
blade tomakeitfitintoyouroutlet. If thisplug will notfitintoyouroutlet, you
probablyhavean out-dated non-polarized ACoutlet. You shouldhaveyouroutlet
changed byaqualified licensed electrician.
AC Plug
AC Outlet
CKS2021_ib062603.p65 26/6/2003, 14:545

6
LOCATIONOFCONTROLSAND INDICATORS
600
700
800
14001000 1700
100
9688 92
108
104
106
AM
TOPVIEW
FRONTVIEW
LEFT SIDEVIEW
RIGHTSIDEVIEW
1
2
3 4 5
6
7
DIMMER
LOW HIGH
ALARM 2
BUZZ OFF
RADIO
ALARM 1
BUZZ OFF
RADIO
24
23
22
25
26
27
TUNING
VOLUME
AM FM
TIME ZONE
ALARM
MODE
TIME
MONTH/DATE
DOWN
UP
YEAR
ALARM1 ALARM2
AUTO TIME SETTING
DUAL ALARM
TM
8
14
13
12
15
16
17
18
19
20
21
11
10
9
CKS2021_ib062603.p65 26/6/2003, 14:546

7
1.)ALM1‘On’Indicator.
2.)AMindicator.
3.)Time/DateDisplay.
4.)ALM2‘On’Indicator.
5.)LOWBATT.LEDIndicator.
6.)DayLEDIndicators.
7.)Lighted DialPointer.
8.)TIMESetting Button.
9.)SLEEP ONButton (Sleep ToMusicTimer).
10.)ALARMMODE(Weekdays/Weekends/EverydayAlarm)Button.
11.)TIMEZONEButton.
12.)ALARM1setting Button.
13.)Speaker(Top Cabinet).
14.)ACPowerCord(Back Cabinet).
15.)Back UpBatteryCompartment(BottomCabinet).
16.)ALARM2setting Button.
17.)UPButton.
18.)DOWNButton.
19.)RADIOON/OFF Button.
20.)MONTH/DATESetting Button.
21.)SNOOZE(SLEEP OFF)Button.
22.)DisplayDIMMER(LOW/HIGH)Switch.
23.)ALARM2(BUZZ/RADIO/OFF)SelectorSwitch.
24.)ALARM1(BUZZ/RADIO/OFF)SelectorSwitch.
25.)TUNINGControl.
26.)RadioBand (AM/FM)Switch.
27.)VOLUMEControl.
CKS2021_ib062603.p65 26/6/2003, 14:547

8
OPERATINGINSTRUCTIONS
SETTINGTHETIME,THEFIRSTTIME
IMPORTANT:The firsttimeyou connectyournewSmartSet®clock radiotothe
ACoutletthe internalcomputerwill automaticallysetthe timecorrectlyforthe
EasternTimeZone,whichisthe initialdefaultsetting.The displaywill scan fora
fewsecondsand then showthe correctDay and Timeinthe Easternzone.If you
liveinthe EasternTimezone,there’s nothing elsetodo.Yourclock issetcorrectly
and running.
If you do notliveinthe EasternTimezone you mustchange the defaultzone
displaytoyourownzone.Youonlydo thisonetimeandtheSmartSet®willremember
the newdefaultzone setting and will always returntothatsetting afterapower
interruption
Thereare7timezonesprogrammed intoyourSmartSet®clock radioasfollows:
ZONE1—AtlanticTime
ZONE2—EasternTime(DefaultSetting)
ZONE3—CentralTime
ZONE4—MountainTime
ZONE5—PacificTime
ZONE6—Yukon Time
ZONE7—Hawaiian Time
Tochange the defaulttimezone display,depress the TIMEZONEbutton.The
number“2”will appearon the displayindicating thatthe defaultzone isZONE2,
EasternTime.Holdthe TIMEZONEbutton and then press eitherthe UPorDOWN
buttonsuntil yourowntimezone appearson the display,then releasethe buttons.
The clock displaywill change tothe correcttimeinthe timezone you selected.The
clock will always returntothe correcttimeinthe zone you selected afterevery
powerinterruption.If you movetoadifferenttimezone,simplychange the default
zone displaytothe newzone and the SmartSet®will rememberthatsetting foryou.
CKS2021_ib062603.p65 26/6/2003, 14:548

9
DATEDISPLAY
Tosee the correctdateatanytime,depress the MONTH/DATEbutton.The display
changesfromtimetomonthand date(MM/DD).Forexample,May21stwill appear
as“521”.When you releasethe MONTH/DATEbutton the displayreturnstothe
correcttime.
YEAR DISPLAY
Tosee the correctyear,depress the MONTH/DATEand TIMEbuttonstogether.
The displaychangesfromtimetoyear.When you releasethe MONTH/DATEand
TIMEbuttonsthe displayreturnstothe correcttime.
DAYLIGHTSAVINGAND LEAPYEAR ADJUSTMENTS
All DaylightSaving and Leap Yearadjustmentsaremade automaticallyby
the SmartSet®internalcomputerasfollows:
•StartofDaylightSaving Time:
At1:59.59 AMon the firstSundayinApril,the clock will automatically
advanceto3:00 AM.
•End ofDaylightSaving Time:
At2:59.59 AMon the lastSundayinOctober,the clock will automatically
resetto2:00 AM.
•LeapYear:
At12:00 Midnighton February28th,the calendardisplaywill change
to"229"
CKS2021_ib062603.p65 26/6/2003, 14:549

10
MANUALTIMEADJUSTMENTS
Somepeopleliketosettheirclocks 5to10 minutesfasttomakesurethattheywill
always be on time.Even though the SmartSet®setsthe timebyitself, you still have
the option ofadjusting the timemanuallyifyou wish.
Tomanuallyadjustthe timedisplaydepress and holdthe TIMEbutton,and press
eitherthe UPorDOWNbuttonstoadjustthe timedisplayahead orback asdesired.
Eachpress ofthe UPorDOWNbuttonswill change the displaybyone minute.If
you holdthe UPorDOWNbuttonsthe displaywill continue tochange.The display
will change slowlyatfirst, one minuteatatime.Butifyou continue holding the UP
orDOWNbuttonsthe displaywill change rapidly.
Note:If youmanuallyadjustthetime,yournewsettingisentered intothe SmartSet®
memory.If the powerisinterrupted,the displaywill returntoyournewsetting,not
the originalsetting,when the powerisrestored.
ADJUSTINGTHEWAKEUPTIMES
YourSmartSet®clock radiohastwoseparatealarmsthatcan be setand used
independently.You mayusethe alarmstowaketwopeopleatdifferenttimes,or
you mayuseone alarmforweekdays and the otherforweekend wakeup times.
The procedureforadjusting the wakeup timeisthe sameforbothAlarm1and
Alarm2.
1.)Depress and holdeitherthe ALARM1orALARM2setting button.The display
will change fromthe correcttimetothe Alarm1orAlarm2wakeup time.
2.)Whileholding the ALARM1orALARM2setting button,depress eitherthe UP
orDOWNbutton tomovethe displayahead orback toyourdesired wakeup
time.
3.)When the desired wakeup timeappearson the display,releasethe UPor
DOWNbuttons.
Note:Besurethatyou havesetthe wakeup timecorrectlybyobserving the
AMindicator.If the AMindicatoris‘On’the wakeup timeis“AM”.If the AM
indicatoris‘Off’,the wakeup timeis“PM”.
4.)When the desired wakeup time(AMorPM)appearson the display,release
the ALARM1orALARM2setting buttons.
CKS2021_ib062603.p65 26/6/2003, 14:5410

11
SELECTINGTHEALARMMODE
YourSmartSet®clock radioallowsyou toselectfromamong three differentalarm
operation modesforeitheralarm.The alarmmodesare:
•Everyday –the alarmwill turnon all 7days.
•Weekdays only–the alarmwill onlyturnon Mondaythrough Friday;
•Weekendsonly–the alarmwill onlyturnon Saturdayand Sunday;
Tocheck theAlarmMode setting forAlarm1,depress the ALARM1setting button.
The displaywill showtheAlarm1wakeup timeand the dayofthe weekindicators
will showyou the alarmmode whichisselected.
•If all 7indicatorsare‘On’,the Everydaymode isselected.
•If onlythe Mondaythrough Fridayindicatorsare‘On’,the Weekdays onlymode
isselected.
•If onlythe Saturdayand Sundayindicatorsare‘On’,the Weekendsonlymode is
selected.
Tochange the AlarmMode setting forAlarm1,holdthe ALARM1setting button
and press the ALARMMODEbutton until the dayindicatorsshowthe desired
mode setting,Weekdays only,Weekendsonly,orEverydayoperation.Release
the ALARMMODEand ALARM1setting buttonsand the displaywill returntothe
correcttime.
Followthe sameproceduretoselectthe desired AlarmMode forAlarm2if
necessary.
CHECKINGTHEWAKEUPTIMES AND ALARMMODE
Wheneveryou wanttocheck the wakeup timeorthe alarmmode settings,simply
press eitherthe ALARM1orALARM2setting buttons.The displaywill change
fromcorrecttimetowakeup timeand the dayindicatorswill showyou the alarm
mode whichiscurrentlyselected.
Releasethe ALARM1orALARM2setting buttonstoreturntocorrecttime.
CKS2021_ib062603.p65 26/6/2003, 14:5411

12
LISTENINGTOTHERADIO
1.)Setthe Band selectortothe desired band,AMorFM.
2.)Setthe VOLUMEcontroltoalowsetting.
3.)Press the RADIOON/OFF button toturnthe radio‘On’.The radiodialpointer
will light.
4.)Selectyourdesired station withthe TUNINGcontrol.
5.)Adjustthe Volumecontroltothe desired setting.
6.)When you arefinished listening,press the RADIOON/OFF button toturnthe
radio‘Off’.The radiodialpointerlightgoesoff.
ANTENNA INFORMATION
AM–The AMbarantenna isinside the cabinet. IfAMreception isweak,change
the position ofcabinetuntil the internalantenna picks up the strongestsignal.
FM–The FMantenna isbuiltintotheACpowercord.If FMreception isweaktry
varyingthepositionand directionofthe powercorduntil youfind the strongest
signal.
600
700
800
14001000 1700
100
9688 92
108
104
106
AM
CKS2021_ib062603.p65 26/6/2003, 14:5412

13
WAKETORADIO
1.)Turnthe radio‘On’and selectthe band,station,and volumelevelthatyou wish
tohearwhen the alarmcomeson,then turnthe radio‘Off’again.
2.)Reconfirmthe wakeup timeand alarmmode settingsforthe alarmyou are
using,Alarm1,Alarm2,orbothalarms.
3.)Setthe ALARMselectorswitchforone orbothalarmstothe ‘RADIO’position.
The appropriateALM1and/orALM2indicatorswill lightup toconfirmthatthe
alarmsareset.
4.)Atthe selected wakeup timethe radiowill turn‘On’.It will playforone hourand
then shutoff automatically.
5.)Tostop the radiosooner,press eitherthe appropriateALARM1orALARM2
button,orpress the RADIOON/OFF button.The radiowill stop butthe alarm
remainssetand will turnthe radioon againatthe sametimeon the following
day(depending on the AlarmMode setting).
6.)If you do notwantthe alarmtoturnthe radioon the following day,setthe
appropriateALARMselectortothe ‘OFF’position.
WAKETOBUZZER
1.)Reconfirmthe wakeup timeand alarmmode settingsforthe alarmyou are
using,Alarm1,Alarm2,orbothalarms.
2.)Setthe ALARMselectorswitchforone orbothalarmstothe BUZZ position.
The appropriateALM1and/orALM2indicatorswill lightup toconfirmthatthe
alarmsareset.
3.)Atthe selected wakeup timethe buzzerwill sound.It will continue forone hour
and then shutoff automatically.
4.)Tostop the buzzersooner,press eitherthe appropriateALARM1or
ALARM2button.The buzzerwill stop butthe alarmremainssetand will turn
the buzzeron againatthe sametimeon the following day(depending on the
AlarmMode setting).Tostop the buzzerand turnon the radioimmediately,
press the RADIOON/OFF button instead ofthe ALARM1orALARM2button.
5.)If you do notwantthe alarmtoturnthe buzzeron the following day,setthe
appropriateALARMselectortothe ‘OFF’position.
CKS2021_ib062603.p65 26/6/2003, 14:5413

14
RADIO AND BUZZEROPERATION
You mayalsosetone alarmforwaketoradioand the otherforwaketobuzzer.
Justsetthe ALARM1and ALARM2selectorswitchestothe desired positions.
SNOOZEALARM
Afterthe radioorbuzzeralarmsoundsinthe morning you maypress the SNOOZE
Barforafewmoreminutessleep.The alarmwill stop forapproximately9minutes
and then turnon again.You mayrepeatthe Snoozeoperation up toseven timesif
desired,butafterthe seventhtimethe alarmwill notturnon again.
CKS2021_ib062603.p65 26/6/2003, 14:5414

15
SLEEP TOMUSICTIMER
You can programthe sleep timertoplaythe radioforup to90 minutesand then
shutoff automatically.
1.)Press the SLEEP ONbutton.The displaywill brieflyshow“10”and the radio
will begintoplay.After10 minutesthe radiowill shutoff automatically.Each
timeyou press the SLEEP ONbutton the sleep timerwill startat10 minutes.
Thisisthe sleep timerdefaultsetting.
2.)Toincreaseordecreasethe amountoftimethatthe radiowill playbefore
shutting off, holdthe SLEEP ONbutton and press eitherthe UPorDOWN
button tochange the displaytothe desired sleep time,up toamaximumof90
minutesoraminimumof2minutes.
Note:When you change the sleep timerfromthe 10 minutedefaultsetting to
adifferentsetting,the newsetting becomesthe defaultsetting.Wheneveryou
activatethe sleep timeritwill beginwithyournewdefaultsetting and count
downtozerofromthatpoint.
3.)Tocancelthe sleep timerbeforeitcountsdownto“00”and shutthe radio‘Off’
immediately,press the SNOOZEBar.
IMPORTANT:Rememberthatthe station and volumesettingsyou chooseforthe
Sleep ToMusicoperation arethe samesettingsyou will hearifyou setthe alarm
forwaketoradiothe following morning.
DIMMERCONTROL
The DIMMERcontrolwassettothe HIGHposition atourfactory.If you find the
clock displayistoo brightinadarkened room,setthe DIMMERcontroltothe LOW
position.
CKS2021_ib062603.p65 26/6/2003, 14:5415

16
CHANGINGTHELITHIUMBATTERY
Likeall batteries,eventuallythe builtinlithiumbatterywill need tobe replaced.A
numberoffactors,suchas,the lengthoftimebetween the datethe radiowas
manufactured and the dateyou plugged itinforthe firsttimedetermine the amount
oftimebeforereplacement. During thisinitialstorage period,the lithiumbatteryis
supplying powertothe SmartSet®computermemory.Onceyou plug the radioin,
yourhouseholdoutletsuppliesthe power,and the batteryisnotbeing used.A
freshlithiumbatterycan supplypowertothe SmartSet®computerforatleast3
yearseven ifitisneverconnected toan ACpowersupply.If yourradiowas
connected toyourACsupplywithinafewmonthsafteritwasmanufactured,and
you experienceonlythe normal,nuisancetype,shortduration powerinterruptions,
yourbatterymaylastforup to5yearsoreven longer.
When the batterypowerdropsbelowacertainlevel,the LOWBATT indicatorwill
comeon.When you see thisindicator,you shouldchange the batteryassoon asit
isconvenientforyou todo so.Tochange the batteryproceed asfollows:
1.)Purchaseareplacement3Vlithiumbatterywhereverbatteriesaresold.The
batterytype isCR2430 orequivalent.
2.)Removethe batteryfromitspackage soitisreadytoinstall.
IMPORTANT:Leavethe radiopowercordconnected toyourACoutlet. This
will provide powertothe SmartSet®computermemorywhilethe originallithium
batteryisremoved.
3.)Turnthe radioupside downand useasmall screwdrivertoremovethe screw
securing the batteryholdertothe cabinet.
BECAREFULNOTTOLOSE THISSMALL SCREW!
4.)Removethe originalbatteryfromthe holderand insertthe newbatteryintothe
holderthe sameway,observing the positive(+)direction.Slide the holderwith
the newbatteryback intothe slotinthe cabinet.
5.)Replacethe screwthatsecuresthe batteryholderinthe cabinet.
6.)Turnthe radiorightside up
and confirmthatthe LOW
BATT indicatoris‘Off’.
7.)Savetheseinstructions.You’ll
havetodo thisagainfiveto
eightyearsfromnow!
1
2
3
4
CR2430
PAPERCOVER
TURN HOLDER
UP-SIDE-DOWN
BOTTOMCABINET
CKS2021_ib062603.p65 26/6/2003, 14:5416

17
RESETTINGTHECLOCK AFTERATOTALMEMORYLOSS
If you do notchange the builtinlithiumbatterywithinareasonableperiod oftime
afteryou see the LOWBATT warning indicator,the lithiumbatterymaybecome
exhausted and will no longerbe abletosupplyback up powertothe SmartSet®
internalcomputer.If the unitisdisconnected fromtheACoutletafterthe batteryis
exhausted,orifapowerinterruption occurs,the SmartSet®memorywill be lost
and the clock will need tobe resetwhen the powerisrestored.Besuretoinstall a
freshlithiumbatterybeforeyou resetthe clock,otherwisethe clock will need tobe
reseteachtimethe powerisinterrupted.
If the lithiumbatteryisexhausted and you experiencean interruption inthe AC
powersupply,the clock will resetitselftoitsinitialdefaultsetting when the poweris
restored.The initialdefaultsetting is6:00AM,Thursday,January1st(11),1998.
If you noticethatthe timeon yourSmartSet®clock radioiscompletelyincorrect,
and the dayindicatorisalsowrong,press the MONTH/DATEand TIMEbuttons
togethertosee the year.If the yeardisplayisshowing “1998”you probably
experienced atotalmemoryloss.Toresetthe clock afteratotalmemoryloss,
proceed asfollows:
1.)Followtheinstructionson page 16 and installanewCR2430lithiumbatteryin
the batterycompartment.
2.)Connectthe radiotoyourACoutletand letthe clock setitself.
3.)Depressthe MONTH/DATEandTIMEbuttonstogether.The displaywillchange
from‘time’to‘year’.
4.)Whileholding the MONTH/DATEand TIMEbuttons,press the UPbutton to
setthe displaytothe correctyear,then releasethe buttons.
5.)Depress the MONTH/DATEbutton.The displaywill change from‘time’to
‘month/date’(mm/dd).
6.)Whileholding the MONTH/DATEbutton,press the UPbutton tosetthe display
tothe correctmonthand date.The Dayindicatorwill change automaticallyas
you adjustthe month/datesettings.When the correctmonthand dateappear
on the display,releasethe buttons.
7.)Depress the TIMEbutton and the UPbutton tosetthe displaytothe correct
time.Besuretoconfirmthatyou havesetthe timecorrectlyto‘AM’or‘PM’by
observing the AMindicator.
8.)Afteryou setthe time,reconfirmthattheDay,and Month/Datedisplays arestill
correct. Makefinaladjustmentsifnecessary.
CKS2021_ib062603.p65 26/6/2003, 14:5417

18
The SmartSet®clock memoryisnowresetand the newlithiumbatterywill maintain
itforthe next5to8years,depending on the numberand duration ofthe power
outagesyou experience.
IMPORTANTNOTE:
Afterresetting the clock,don’tforgettoresetyourwakeup times,and alarmmode
settings,and sleep timersettingsaswell.
LITHIUMBATTERYPRECAUTIONS
•Disposeofthe oldbatteryproperly.Donotleaveitlying around whereayoung
childorpetcouldplaywith,orswallowit. If the batteryisswallowed,contacta
physician immediately.
•Batterymayexpolde ifmistreated.Donotattempttorecharge itordisassemble
it. Donotdisposeofthe oldbatteryinafire.
CKS2021_ib062603.p65 26/6/2003, 14:5418

19
CAREAND MAINTENANCE
If thecabinetbecomesdusty,wipe itwithasoftcloth.Ifthe cabinetbecomes
smudged ordirty,clean itwithasoft, slightlydampened cloth.Neverallow
wateroranyliquidtogetinsidethecabinet.Neveruseanyabrasivecleaners
orcleaning padsasthesewill damage the finishofyourradio.
TOFIND THELOCATIONAND PHONE
NUMBEROFYOUR NEARESTSERVICE
CENTERPERMITTEDTOPERFORM
WARRANTY...
CALL TOLL FREE:1-800-695-0098
SERVICE
FORCUSTOMERSERVICE,PLEASE WRITETO:
Emerson RadioCorp.
ConsumerAffairsDept.
1901 DiplomatDrive,
FarmersBranch,TX75234
FORADDITIONALSET-UPOROPERATINGASSISTANCE
PLEASE CALL:
1-800-898-9020
CKS2021_ib062603.p65 26/6/2003, 14:5419