Emerson HK95 User manual

IMPORTANT SAFETY INSTRUCTIONS
1
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments / accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, has changed its performance, or has been dropped.
14. This appliance shall not be exposed to dripping or splashing water and no object filled with
liquids such as vases shall be placed on the apparatus.
15. Do not overload wall outlet. Use only power source as indicated.
16. Use replacement parts as specified by the manufacturer.
17. The product may be mounted to a wall only if recommended by the manufacturer.
18. Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with
arrowhead symbol, within
an equilateral triangle is
intended to alert the user to
the presence of uninsulated
‘dangerous voltage’ within
the product’s enclosure that
may be of sufficient
magnitude to constitute a
risk of electric shock to
persons.
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK DO NOT
REMOVE COVER (OR
BACK), NO USER
SERVICEABLE PARTS
INSIDE. REFER
SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
The exclamation point
within an equilateral
triangle is intended to alert
the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the
appliance.
HK95.OM.QXD 8/20/02 11:27 AM Page 1

THE GLITTER LAMP IS NOT A TOY. IT SHOULD BE KEPT OUT OF THE
REACH OF CHILDREN. THE GLASS CYLINDER GETS HOT WHILE THE LAMP
IS OPERATING AND REMAINS HOT FOR SEVERAL HOURS AFTER THE
LAMP IS SWITCHED OFF. THE GLASS CYLINDER WILL BREAK IF THE LAMP
IS KNOCKED OVER, DROPPED OR STRUCK WITH A HARD OBJECT.
IF THIS GLITTER LAMP IS INTENDED TO BE USED IN A CHILD’S ROOM, IT
MUST BE POSITIONED IN SUCH A WAY THAT NEITHER THE LAMP ITSELF
NOR THE AC POWER CORD IS ACCESSIBLE TO THE CHILD.
DO'S & DON'TS:
Please follow the precautions below:
DO’S
• DO have the glitter lamp at room temperature before starting.
• DO allow the glitter lamp to warm up for about 30 minutes to insure it performs
at its optimal level.
• DO operate glitter lamp on flat and stationary surfaces which are at room
temperature.
• DO keep glitter lamp and cord out of reach of small children's and pets.
• DO handle the glass glass cylinder with extreme care. The glass cylinder may
break if dropped, knocked over or subject to any form of sudden impact. If it
becomes necessary to clean up broken glass, then use care and sufficient
safety precautions (Refer to Clean Up Instructions.)
• DO check to see if the light bulb and socket in the base are completely
centered and tightened. The light bulb and socket may have moved during
shipping. If this has occurred, then gently use your fingers to re-center it.
Before touching the lamp, make sure it is cool and unplugged.
• DO exercise caution when handling the glitter lamp when it is plugged in. It
takes two to three hours for the glitter lamp to cool once it is turned off.
DON’TS
•DO NOT place the glitter lamp near sources of heat or cold, such as a heater or air
conditioner. The lamp operates best at room temperatures between 70°F to 79°F.
•DO NOT move or shake the glitter lamp while it is HOT; doing so may cause it
to permanently malfunction.
•DO NOT operate or store the glitter lamp in direct sunlight; doing so may cause
the colors to fade.
•DO NOT try to force the polarized plug into an outlet. As a safety precaution,
one blade on the plug is wider than the other and can only be inserted one way
into an outlet.
•DO NOT operate the glitter lamp for more than six hours at a time.
•DO NOT remove the CAP on the glass cylinder or add any fluids or solids to
the lamp: Breaking the seal on the glass cylinder will void the warranty.
•DO NOT operate the lamp on Glass Surfaces.
•DO NOT break the seal on the cap to fill with liquid or solids. Breaking the seal
will void the warranty.
2
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
HK95.OM.QXD 8/20/02 11:27 AM Page 2

SAFETY AND FIRST AID
For Ingestion: DO NOT induce vomiting! Seek medical attention.
For direct contact with eyes: Flush open eye with direct stream of water for
15 minutes and then seek medical attention.
For direct skin contact: Clean the affected area thoroughly with soap and
water. Remove and wash contaminated clothing immediately. If irritation
occurs, seek medical attention.
For nausea or headaches cause by the odor: Step outside for fresh air. If
symptoms persist, seek medical attention.
3
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
My friends at Emerson Radio Corp. are producing this Glitter Lamp, under license from
Sanrio Company Ltd. We have taken great care to make sure your unit was in perfect
working order when it left our factory. It has been designed to give you many years of
enjoyment and trouble free operation. Read this manual before operating this unit to
become familiar with its features. In the event you require technical assistance, please
contact my friends at the Emerson Radio Customer Service hotline at 1-800-898-9020.
Retain this manual for future reference.
The serial number of your unit can be found on a label on the bottom of the cabinet. We
suggest that you record the serial number in the space provided below in case this
information is ever needed at a future date.
Model Number: HK95
Serial Number: _______________________________________
WELCOME
HK95.OM.QXD 8/20/02 11:27 AM Page 3

4
LOCATION OF CONTROLS
2
1
5
3
4
1. Top Cap
2. Glass Cylinder
3. AC Cord
4. ON/OFF Switch
5. Base
AC OPERATION:
Unwind the supplied AC power cord and extend it to its
full length. Insert the AC power cord into any
convenient 120V 60Hz household outlet.
Please note that this unit is equipped with a polarized
AC plug which has one blade wider than the other. This
is a safety feature to reduce the likelihood of electric
shock. This polarized AC plug will only fit in a polarized
AC outlet. If you find that you cannot insert this plug into your outlet, you may have an
obsolete non-polarized outlet. Please do not try to defeat this safety feature by using a
non-polarized adapter or by filing the wider blade to make it fit into your outlet. If this plug
does not fit into your outlet, you should contact a qualified licensed electrician to replace
your obsolete outlet.
POWER SOURCES
AC Plug
AC Outlet
HK95.OM.QXD 8/20/02 11:27 AM Page 4

5
Follow these instructions to assemble the Glitter Lamp:
ASSEMBLY AND OPERATION INSTRUCTIONS
Carefully unpack the Glitter Lamp
from the box. Position body (B) on
base (C) and make sure it is secure.
NOTE: Check to make sure that the
bulb is tight. Gently tighten if
necessary.
B
C
1
Plug in the Glitter Lamp as
described in the section above and
turn the ON/OFF switch On.
Remember, initial warm-up will take
about 30 minutes.
3
Position cap (A) on body (B) and
make sure it is secure.
A
B
2
NOTE:
Please read all of the safety
instructions on page 2 before
assembling.
CLEAN UP INSTRUCTIONS
If the glass cylinder has broken, the exposed liquid is not harmful if handled
properly as follows:
1. Wear rubber gloves when cleaning up to protect against skin irritation and
to prevent cuts from broken glass.
2. Carefully pick up and dispose of broken glass.
3. Use disposable towels to soak up excess liquid. Do NOT use water or
other cleansers to aid in clean up as the liquid is not water-soluble.
4. After the liquid has been cleaned up, cleanser can be used. Clean
thoroughly to remove any stains and odors.
HK95.OM.QXD 8/20/02 11:27 AM Page 5

6
Emerson Radio Corp. warrants manufacturing defects in original material,
including original parts and workmanship, under normal use and conditions,
for a period of ninety (90) days from the date of original purchase in the U.S.
With your dated proof of purchase, we will provide repair service at no charge
for labor and parts (excluding bulbs) at an authorized Depot Repair Facility, or
replace the product in our discretion. For repair or replacement, pack your
unit in a padded box, enclose your check or money order payable to Emerson
Radio Corp. in the amount of $5.00 (not required by California residents) to
cover shipping and handling costs, and enclose a copy of your proof of
purchase. Send your unit to:
Emerson Radio Corp.
1901 Diplomat Drive
Farmers Branch, TX 75234
This warranty does not cover damage from negligence, misuse, abuse,
accident, failure to follow operating instructions, commercial use, rental,
repairs by an unauthorized facility, or products purchased, used, serviced or
damaged outside of the United States.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
AU898I
LIMITED WARRANTY
REPLACING THE BULB
Use only a 25 watt, 120 volt, G16.5, cand.
screw type bulb to replace a burned out
light bulb. Use of any other bulb may result
in unsatisfactory operation, fire and/or
breakage of the glass cylinder.
HK95.OM.QXD 8/20/02 11:27 AM Page 6

EMERSON
PART NO.: 21-2030
206-01 Printed in China
®
HK95.OM.QXD 8/20/02 11:27 AM Page 7

1976,2002 Sanrio Co. Ltd.
GLITTER LAMP
OWNER’S MANUAL
HK95
HK95.OM.QXD 8/20/02 11:27 AM Page 8