Emerson Smart Wireless Navigator User manual

Reference Manual
00809-0100-4423, Rev AB
May 2014
Emerson®Smart Wireless Navigator

2
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
Contents
Theory of operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3
Installing the Navigator machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3
Launching Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5
Navigator security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5
Adding networks to Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7
Understanding the Navigator - general layout and terminology . . . . . . . . . . . . . . . . . . . page 9
Using the Navigator for network planning and commissioning . . . . . . . . . . . . . . . . . . . . page 11
Using the Navigator for network management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 13
Using the Navigator for network maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16
Advanced Navigator functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 18
Shutting down Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 19
Service and troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 19

3
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
1.1 Theory of operation
The Emerson Smart Wireless Navigator is a stand-alone network infrastructure management
tool. It brings together several Emerson Smart Wireless software tools to streamline wireless
network experience. Delivered on a specially designed computer, the Navigator helps to plan
and deploy networks, manage devices and networks, and easily make maintenance plans.
1.2 Installing the Navigator machine
1.2.1 Contents
The Smart Wireless Navigator is a three-box package containing the following:
Box 1 (Dimensions: 24 x 21.5 x 14.5)
(Italicized items are not required for recommended setup)
Quantity 1 - Computer workstation tower, containing all Smart Wireless Navigator Software,
with attached licensing dongle
Quantity 1 - USB keyboard
Quantity 1 - USB mouse
Quantity 1 - 6' power cord for computer tower (NEMA 5-15, Type B, 125 V)
Quantity 3 - Additional power cords possible (if designated when ordering); 6' power cords; one
for computer tower, two for displays
Quantity 1 - Setup and Features Information Booklet
Quantity 1 - Safety and Regulatory Information Booklet
Quantity 1 - Smart Wireless Navigator Product Manual
Quantity 2 - DVI-to-VGA Adapter (white)
Quantity 2 - Display Port-to-DVI Adapter
Quantity 2 - Resource Media CD
Quantity 1 - Applications CD
Box 2 and 3 (Dimensions: 23 x 16 x 8.5)
(Boxes 2 and 3 are identical. Italicized items are not required for recommended setup)
Quantity 1 - 22" LCD display monitor
Quantity 1 - Monitor stand
Quantity 1 - 6' power cord for monitor (NEMA 5-15, Type B, 125 V)
Quantity 1 - 6' DVI Monitor Cable (white)
Quantity 1 - Monitor Setup Guide
Quantity 1 - Product Information Guide
Quantity 1 - 6' VGA Monitor Cable
Quantity 1 - 6' HDMI Monitor Cable
Quantity 1 - Drivers and Documentation CD

4
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
1.2.2 Setting up the computer
1. Set up the monitors as instructed by the Monitor Setup Guide provided in boxes 2 and 3.
The white DVI monitor cables are recommended for the best display resolution.
Box 1 contains region-specific power cords (outside of NEMA type).
2. Set up the workstation as instructed by the Setup and Features Information Guide
provided in Box 1.
The Monitor Cables referenced in step 1 will connect to the back of the workstation.
Note
Be very cautious not to damage the USB licensing dongle located on the back of the
workstation.
3. Connect the local area network ethernet cord to the back of the workstation.
4. Power up the Navigator by pressing the power button on the front of the workstation.
5. Read and consider the Microsoft End User License Agreement.
6. Log into the Navigator workstation.
a. Username: Administrator
b. Password: navigator
1.2.3 Assigning an IP address
By default, the Navigator is set up to connect to a dynamic IP architecture and be assigned an IP
address by dynamic IP address allocation (DHCP).
Consult your IT department to determine if your site runs a dynamic or static architecture. All
static IP information will come from IT.
A static IP architecture means that a specific IP address will be assigned to the Navigator box. To
configure the Navigator to connect to a static IP architecture:
1. Open the Windows Start Menu.
2. Select “Control Panel.”
3. Click “Network and Sharing Center.”
4. In the left panel, click “Change Adapter Settings.” This will open a list of Network
Interface Cards.
5. Right click on Navigator Primary and select Properties.
6. Under Properties dialog box, highlight IP Version 4 and click Properties.
Note
The radio button “Obtain an IP address automatically” will be selected. This means the IP
address will be obtained from a DHCP (Dynamic Host Configuration Protocol) server.
7. Click “Use the following IP address” and enter in the IP address assignment for the
Navigator.

5
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
1.2.4 Windows user permissions
When installing the Navigator, it is necessary to consider user permissions. The default user for
this computer is an Administrator user. An Administrator has privileges to add or delete
programs, among other capabilities. To restrict the General Navigator user from these
privileges, create a General User account in the Control Panel. It is recommended to run the
Navigator on a Windows user with the least privileges possible.
1.2.5 Windows passwords
When installing the Navigator, it is strongly recommended, for security purposes, to change the
password for the Windows log in. Follow best practices and site/corporate IT policies to create a
strong, non-default password.
1.2.6 Windows updates
It is strongly recommended to keep the computer up to date with the latest Windows patches
and security updates. Follow site or corporate IT and security policies when implementing and
managing the Navigator system.
1.3 Launching Navigator
After logging into the Navigator workstation, the Navigator program will auto launch. Please
allow time for Navigator to load; this may be several minutes for initial launch.
1.4 Navigator security
A user must be logged into the Smart Wireless Navigator to access the information
and launch the programs it contains. To log in to Navigator, simply click the “log in”
button in the Title Bar. A prompt will ask for a username and password. Enter the
appropriate username and password. Several design tools and applications may require a log in.
1.4.1 Navigator passwords
The Smart Wireless Navigator has two levels of user permissions, administrative and general
user. There is one administrative account and three general accounts. The administrative
account, “Supervisor,” has a default password of “Admin”.
When commissioning the Navigator, it is strongly recommended, for security purposes, to
change the password for the Navigator profile log ins. Follow best practices and site/corporate
IT policies to create strong, non-default passwords.
The Administrator has the authority set up and change all the user accounts and
passwords, but the usernames cannot be changed. Click on the “Settings” button in
the Function bar. The change password capability can be found on the bottom of the
screen.

6
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
Table 1-1. User accounts and passwords
To protect the Navigator information and programs when not in use, or to switch
users, click the “log out” button in the Title Bar.
1.4.2 AMS™Wireless Configurator or AMS Device Manager
Launching the design sub-menu and selecting the Device Design button with open
AMS Wireless Configurator or AMS Device Manager, depending on your Navigator
type. A prompt will ask for the username and password associated with this AMS
account. AMS Wireless Configurator has a default username/password of admin/[no password].
When commissioning the AMS Wireless Configurator within the Navigator, it is strongly
recommended, for security purposes, to change the password. Follow best practices and
site/corporate IT policies to create a strong, non-default password. The username and password
of AMS Device Manager will match the username/password of the main AMS system.
1.4.3 Server Plus Connect for AMS Device Manager
To connect to a different Server Plus Station, the Client SC Station must first be added
to the Station Configuration of the Server Plus Station (see Related Topics for more
information). If this requirement is not met, an error (This PC is not licensed for
Client-Server operation) displays on the Client SC Station when AMS Device Manager is started.
To connect to a different Server Plus Station if AMS Device Manager is closed on the Client SC
Station:
1. In Network Configuration on the Client SC Station, remove all configured system
interfaces (other than HART®Modem).
2. Select Start | All Programs | AMS Device Manager | Server Plus Connect.
3. Select the desired Server Plus Station PC from the Server Plus Station drop-down list or
enter the PC name in the box and click Connect.
4. Click Yes to launch AMS Device Manager after making the connection; No to connect
without launching AMS Device Manager; or Cancel to keep the existing connection.
5. After the connection is made, click Close.
To connect to a different Server Plus Station if AMS Device Manager is running on the Client SC
Station:
1. If no system interfaces (other than HART Modem) are configured on the Client SC
Station, select Tools | Server Plus Connect.
2. Select the desired Server Plus Station PC from the Server Plus Station drop-down list or
enter the PC name in the box and click Connect.
3. Click Yes to launch AMS Device Manager after making the connection, No to connect
without launching AMS Device Manager, or Cancel to keep the existing connection.
4. After the connection is made, click Close.
After the Server Plus connection has been established, you can view the entire network
configuration of the Server Plus in the Device Explorer view on the Client SC.
Default username Default password Account type Restrictions
Supervisor Admin Administrative None, Full Access
User 1 Password1 General User Add new Gateways, Settings
(General, Application,
Maintenance)
User 2 Password2 General User
User 3 Password3 General User

7
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
1.4.4 Gateway interface
From the Gateway level view, launching opening the design sub-menu and selecting
the Gateway Interface button will open the Gateway Interface. To access the Gateway
Interface, enter the username and password associated with that Gateway. This is not
usually the username and password of the Navigator.
1.5 Adding networks to Navigator
The Smart Wireless Navigator makes it easy to add networks from the Administrator account.
Click the Settings button on the function bar. Select the checkbox next to the “Gateway
Configuration - Add New Gateways” option. When this box is checked, networks can be added
or removed from the Detailed Gateway Dashboard Display Field.
Figure 1-1. Gateway configuration - adding new gateway option
Click the Home button. From the Home screen, select the section or area to which the Gateway
should be added.
Figure 1-2. Area selection tab
To add a Gateway, type the IP address in the available white space. Press the Enter button.
Figure 1-3. Adding the IP address
If the Gateway is not secure, the network will be immediately added. If the gateway is a secure
gateway, the Navigator will prompt for a username and password. This is the same username
and password used to access the Gateway Interface.
Note
If the Port Number of the Gateway has been changed to a non-default value, the Navigator will
prompt for the Port Number. This can be found in the Security sub-menu of the Gateway
Interface.

8
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
1.5.1 Considerations - navigation tab customization
The default labels of the Gateway Navigation tabs refer to the numerical designation of the
Gateways.
Figure 1-4. Gateway navigation tabs
In large deployments of wireless networks, it may be beneficial to organize the Gateways
according to their applications, or physical process or geographical location. The Smart Wireless
Navigator contains a feature that will rename the main screen navigation tabs to represent these
customized areas.
To customize the navigation tabs, click the Settings button on the function bar. Find
the Gateway Navigation Tab Configuration area. This contains five writable parameter
fields. Clicking on these fields will bring up a prompt for the new name to be entered,
limited to eighteen characters.
Figure 1-5. Gateway navigation tab configuration
1.5.2 Adding networks to AMS Wireless Configurator
1. Launch the Network Configuration utility.
a. Click the Windows Start button from the main taskbar.
b. Click All Programs.
c. Open the AMS Wireless Configurator folder.
d. Click Network Configuration.
2. Click Add.
3. Select Wireless Network from the list of networks in the Select Network Component
Type dialog box. (The Wireless Network selection is only available if you are licensed for
the Wireless Interface).
4. Click Install.
5. Follow the instructions in the “Add Wireless Network” wizard.
6. Launch AMS Wireless Configurator from Navigator or from All Programs in the
Windows menu.
7. Perform a Rebuild Hierarchy operation on the network by right-clicking the top-level
Wireless network icon in Device Explorer and selecting Rebuild and Identify Hierarchy.
8. Perform a Scan New Devices operation on the network by right-clicking the top-level
Wireless network icon in Device Explorer and selecting Scan | New Devices.

9
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
1.5.3 Adding networks to AMS Wireless SNAP-ON
Reference the SNAP-ON manual in the Help menu for detailed instructions.
Once a scaled drawing of the plant has been loaded, networks can be imported from AMS
Wireless Configurator. From the function bar, select Diagram, then Import Wireless Networks.
Select the network to be imported.
Note
This can only be completed once the networks have been added to AMS Configurator, and AMS
Configurator is running.
1.5.4 Adding networks to SteamLogic software
Reference the SteamLogic manual in the Navigator Help menu for detailed instructions.
SteamLogic will need to be registered before it can be commissioned. Register online as
outlined in the product manual located in the Navigator or program help menu.
1. Click the Set Up tab.
2. Enter the network IP address, HART IP Port, and Descriptions in the fields and click Save.
1.6 Understanding the Navigator - general layout and
terminology
Every screen in the Smart Wireless Navigator contains the Title Bar, Display Field, and Function
Bar.
1.6.1 Navigator title bar
Figure 1-6. Navigator Title Bar
The Title Bar contains general product identification and user information, and an option for
user log in and log out. It displays the time as configured by the Windows task bar and a Help
function.
The Help button opens a screen that will provide links to a selection of manuals and
help menus. It also contains an electronic copy of this Navigator manual.

10
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
1.6.2 Navigator display field
The Navigator display field is the area in between the title and function bars.
Figure 1-7. Navigator Display Field
1.6.3 Navigator function bar
Figure 1-8. Navigator function bar
The Navigator function bar contains all the main functions for Navigator operations.
Table 1-2. Navigator Function Bar
Button Name Function
Home Clicking the Home button will return a user to the Overview
screen, where all the networks are listed.
or
Back or
Forward
The Back or Forward buttons will return the display field to the
last screen shown, either back in navigation or forward in
navigation.
Trends Opens Trending function. Description on page 19.
Reports Opens a sub-menu that allows a user to generate a report on
network health or power module status.
Design
Opens a sub-menu that contains all functions related to design.
The sub-menu contains Gateway Interface, Asset Management
Program, Wireless Network Planning Tool, Gateway Capacity
Estimator, and Power Module Life Estimator.
Applications Opens third party application options. Description on
page 18.
Print Screen Will print the screen shown in Navigator display field.
Settings Opens a variety of categories for Navigator settings, including General, Applications, and Navigator Maintenance. Requires
administrator permissions.

11
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
1.7 Using the Navigator for network planning and
commissioning
1.7.1 Network planning tool - AMS Wireless SNAP-ON
The Smart Wireless Navigator has integrated a planning tool for mapping network
layouts for planning, the AMS Wireless SNAP-ON. This application enables importing a
plant image or process unit drawing for customized network planning, with a 'drag
and drop' capability to add devices.
The planning tool can check the design against Emerson Wireless best practices and graphically
show deviations, enabling pre-installation optimization measures to be taken.
Locate the product manual in the Navigator or program Help menu for guidance on product
functionality and additional features.
1.7.2 Smart Wireless Gateway Capacity Estimator
An accurate evaluation of network capacity can be determined by using the Smart
Wireless Gateway Capacity Estimator, which calculates the network capacity using a
combination of the network's type of instrumentation and update rates.
Figure 1-9. Smart wireless gateway capacity estimator

12
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
1.7.3 Smart Wireless Power Module Life Estimator
Once the update rate required for the instrumentation has been determined, it's
recommended to realistically evaluate the impact of these update rates. The Smart
Wireless Power Module Estimator provides estimates for Power Module life by a
combination of wireless device type, update rate, and environmental variables. This tool will
provide valuable information for maintenance expectations by estimating how often Power
Modules will need to be replaced.
Figure 1-10. Power Module Life Estimator
1.7.4 AMS Configurator or Device Manager
Device configuration may be needed after initial network commissioning. The Smart
Wireless Navigator contains a Wireless Configuration application. Depending on
which version purchased, Navigator will contain an integrated AMS Wireless
Configurator or will connect to an existing AMS Device Manager. A username and password is
required to access these tools. This will be different from the Navigator username and password.
Locate the product manual in the Navigator or program Help menu for guidance on product
functionality and additional features.
1.7.5 Gateway interface
Once a Gateway has been added, the Gateway Interface can be accessed for planning
and commissioning functions, such as checking/changing Network ID and Join Key,
enabling Active Advertising, verifying a device has joined the network, etc. The
Gateway Interface can be opened from a Gateway level display field through the design
sub-menu. (This level of page can be identified by locating the Gateway Identification bar,
page 16.) A username and password will be required to access the Gateway Interface. These
credentials are different from the Navigator username and password. Locate the product
manual (Doc no. 00809-0200-4420) in the Navigator Help menu for guidance on product
functionality and additional features.

13
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
Figure 1-11. Gateway interface
1.8 Using the Navigator for network management
1.8.1 Assessing network and device health
The Home screen makes it easy to get a comprehensive view of wireless network and device
health with a single glance. On the Home screen, all networks provide a dashboard that contains
the Gateway tag, communication status, device status, and Power Module status. To filter and
show only networks with alerts, check the “Filter Alerts” checkbox in the upper left hand corner
of the display field. The health status indicators represent the most severe alerts present in that
network. To investigate further and identify the root of the problem, click on the Gateway tag
for a device dashboard view.
Figure 1-12. Device dashboard view
The different levels of dashboards are explained here:
Gateway or device dashboard
This is an example of a Gateway or Device Dashboard. From left to right, it has space designated
for communications status, tag, device status, and battery status. For the Gateway Dashboard,
the alerts shown on this dashboard will represent the most critical alerts present on the entire
network.

14
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
Detailed Gateway dashboard
This is an example of a Detailed Gateway Dashboard. The tick marks represent the number of
devices present on the network. From left to right on the bottom, it has space designated for
communications status, tag, device status, and battery status. The alerts shown on this
dashboard will represent the most critical alerts present on the entire network.
Detailed device dashboard
This is an example of a Detailed Device Dashboard. From left to right on the top, it has space
designated for communications status, device tag, device status, and battery status. The
Detailed Device Dashboard also contains the PV, SV, TV, and QV of that particular device.

15
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
1.8.2 Identifying health issues
The following icons or dashboards could indicate a situation that requires immediate attention:
Table 1-3. Navigator health issues
1.8.3 Communication alert troubleshooting
The Wireless Planning tool, AMS Wireless SNAP-ON, can help by providing more
information for communication alerts. In live mode, it displays the communication
relationships between devices, giving a comprehensive overview of the network and
identifying trouble spots, such as pinch points.
1.8.4 Device alert troubleshooting
AMS Configurator or AMS Device Manager (depending on Navigator version) can
provide recommended actions for advanced troubleshooting of device alerts
remotely. From the device explorer view, a Gateway will display all devices connected
to it. Knowing the tag of the device with the alert, the DD for the specific device can be found
and opened by double clicking the icon of the corresponding tag in AMS Device Manager.
Alert indication Description Where shown What it means
Good Battery
Gateway and Device
Dashboards, Detailed
Gateway and Detailed
Device Dashboards
All Power Modules within this
category are good.
Low Battery –
Change Soon
A Power Module exists within this
category with a low battery.
Schedule maintenance to replace
soon.
Critical Battery –
Change Now
A Power Module within this
category with a critical battery.
Schedule maintenance to replace
now.
Good
Communication Gateway ID Bar, Gateway
and Device Dashboards,
Detailed Gateway and
Detailed Device Dashboards
All Gateways and devices within
this category are connected and
communicating well.
Weak
Communication
Within this category, there is a
communication issue that should
be investigated.
No
Communication
Gateway and Device
Dashboards, Detailed
Gateway and Detailed
Device Dashboards
A device within this category is
not communicating with the
network.
Gateway Not
Connected
Gateway ID Bar, Gateway
and Detailed Gateway
Dashboards
The Gateway is not connected
and not communicating network
information.
Device Status
Good Gateway ID Bar The Gateway device status is good.
Device
Malfunction
Gateway and Device
Dashboards, Detailed
Gateway and Detailed
Device Dashboards
A device within this category has
a device malfunction. Investigate
using an asset management
system.
Device Status
Active Navigation Tabs A battery, communication, or
device alert is active within this
navigation tab.
Gateway and Detailed
Gateway Dashboards
The Navigator is attempting to
add this network.
The Navigator was not able to
find a network at this IP address.
This network has become
disconnected due to a Gateway

16
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
1.8.5 Gateway information
General Gateway Information is available by checking the Gateway Identification Bar. Network
status and Gateway device status indication is immediately available to recommend trouble-
shooting.
Figure 1-13. Network status and Gateway device status bar
Gateway capacity is reported in two ways within the Navigator. On the Detailed Gateway
Dashboard, capacity is indicated by blue tick boxes within the dashboard. On the Gateway
Identification Bar, capacity is indicated by reporting the number of devices present on that
network.
The Gateway Interface can be used to gain more detailed Gateway information, such
as connected devices, update rates, reliability, and path stability. Access the Gateway
Interface for advanced network management information.
1.9 Using the Navigator for network maintenance
When possible maintenance issue has been identified, the Smart Wireless Navigator
makes maintenance planning easy. Clicking on the Reports button opens the Reports
sub-menu, which contains two options for reports. The reports are organized by
order of severity, with the most critical alerts at the top of the report. The report can be printed
by connecting a printer to the Navigator workstation and selecting the Print button on the
function bar.
When accessed from the Home screen, the reports will contain all alerts for all networks. If
maintenance is being performed on a specific Gateway, Gateway-specific reports will be created
by clicking on a reports button from a Gateway level display field. (This level of page can be
identified by locating the Gateway Identification bar).
1.9.1 Power Module Alerts Report
The Power Module Alerts Report contains a list of the devices with Power Modules that
have low voltage and need maintenance attention. It contains valuable information
for locating the devices and planning maintenance. Immediately understand priority
with clear status information- change soon or change now. Easily locate the device with both the
Gateway tag and the device tag. Plan maintenance by knowing ahead of time which type of
Power Module to acquire by using the report, which contains both Power Module model
numbers and description information. Check the box on the print out when the Power Module
has been replaced.
Figure 1-14. Power module alert report

17
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
1.9.2 All Alerts Report
The All Alerts Report contains device alerts, Power Module alerts, and communication
alerts. Easily locate the device with both the Gateway tag and the device tag.
Immediately understand priority with clear status information.
The Device Alerts contain information that a device malfunction has occurred and needs further
investigation in an asset management system. To do this, open the design sub-menu and launch
the asset management system application (AMS Configurator or AMS Device Manager).
Opening the DD for the device will provide an overview dashboard of the device. Click on
'Investigate' in the upper right-hand corner to understand all active alerts and recommended
actions.
Note
The Device Alerts only contain information on device malfunctions, where the HART status is
Bad and the device likely is not communicating accurate information or has been broken.
The Power Module Alerts in the All Alerts report contains the same information as the Power
Module Alerts report.
The Communication Alerts contain communication alerts, such as deviations from network
design best practices and communication failures.
Note
The network design best practice alerts can be disabled by logging into an Administrator
account and accessing the Settings page.
1.9.3 Navigator maintenance
The Smart Wireless Navigator supports future updates. If at any time Navigator
requires an update, the Settings Display Field provides functions to both save and load
back up configurations for the Navigator. At any time, you can reference the last save
date for the Navigator Configuration.
The Save Configuration function will save all Navigator customizations in preparation for a
software update. Network and general configuration preferences are saved, to be loaded after
the Navigator software update is complete. Navigator reports the date this configuration was
last saved.
The Load Configuration function will load a previously saved configuration of the Smart Wireless
Navigator. This includes network and general configuration preferences. Choose from multiple
saved configurations.
Figure 1-15. Load configuration function

18
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
1.10 Advanced Navigator functions
1.10.1 SteamLogic application
The Smart Wireless Navigator contains the SteamLogic application to manage a
Rosemount 708 Acoustic steam monitoring network. The SteamLogic software
calculates the steam trap state based on the acoustic and temperature information
published by the Rosemount 708. Locate the product manual in the Navigator or program Help
menu for guidance on product functionality and additional features.
The SteamLogic application can be accessed by clicking on the Applications folder in the
Function bar.
1.10.2 Add new applications
The Smart Wireless Navigator enables the addition of secondary applications that
may be useful and aid network management, an example being the SteamLogic
software that comes preloaded.
To add a new application, log in as an Administrative user. Click on the Settings button in the
Function bar and select the “Applications” navigation button in the Settings display field. Click
the “Add New Application” button and fill out the prompt with the new application information.
Hit Okay, and click “Save Configuration.”
To delete an application, delete its entered title and click “Save Configuration.”
Figure 1-16. Add new application

19
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
1.10.3 Trending
The Smart Wireless Navigator offers a limited trending capability, intended for trou-
bleshooting and tracking purposes of the primary variable only. Up to six primary
variables can be trended at one time. The visible time-frame of the primary variables
can be configured to show from the last five minutes to the last thirty days. To access the
Trending screen, click the Trends button in the Function bar.
Note
As long as the Navigator is open and running, the Navigator is collecting trend data. If the
Navigator is closed, trend data will be retained but not logged.
To add trends, click the “+” button, and select Gateway and then the tag of the device.
Devices can also be added by clicking on the primary variable in the detailed device
display field.
Additional trending functionality is available by clicking the wrench icon. From this
screen, a ruler or tracker can be added or removed from the trend screen. Primary
variable trend profile configurations can be saved and loaded from this window.
1.10.4 Navigator user preferences
Language - The Smart Wireless Navigator program is available in English and German. To
change the language, access the Settings screen, and select the flag of the desired language.
Background color - The background color of the Smart Wireless Navigator is available in gray
and white. To change the color, access the Settings screen, and select the desired color.
1.11 Shutting down Navigator
Shutting down the Smart Wireless Navigator stops all data collection for trending.
Because of this, the Navigator can only be shut down by the Navigator administrator
account. To close the Navigator, log into the administrator account and click on the
Settings button. Click “Close Navigator” in the bottom right of the General Settings display field.
1.12 Service and troubleshooting
1.12.1 General troubleshooting instructions
Read this manual before working with the product. For personal and system safety, and for
optimum product performance, make sure you thoroughly understand the contents before
installing, using, or maintaining this product.
The United States has two toll-free assistance numbers and one international number.
Customer Central
1-800-999-9307 (7:00 a.m. to 7:00 p.m. CST)
North American Response Center
1-800-654-7768 (24 hours a day)
Equipment service needs (International)
1-952-906-8888

20
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
If at any time a hardware or software issue is experienced, contact the Rosemount customer
support organization or your local Emerson representative.
1.12.2 In-product notifications
When using the Smart Wireless Navigator, the following errors may be experienced.
Note
Device is present after deleting it from the Gateway list. It can take up to 30 days for a deletion
to sync with the Navigator.
For guidance or assistance in other errors, contact the Rosemount customer support
organization or your local Emerson representative.
Description Navigator error
Hardware licensing dongle is missing
The Navigator has been loaded with the maximum
number of Gateways available on this package size.
No default printer, or printer is offline.
Navigator disconnected from Ethernet. All Gateway Dashboards will show as
Disconnected.