Emerson Nick Jr. Dora the Explorer DTE 314 User manual

1
Contents ..................................................................................................................................................1
Power Source...........................................................................................................................................2
Important Safety Instructions................................................................................................................ 3
Location of Controls ..............................................................................................................................8
• Front.................................................................................................................................................. ....8
• Rear ...................................................................................................................................................... 9
Remote Control...................................................................................................................................... 9
• Battery Installation.................................................................................................................................10
• Effective Distance of the Remote Control Transmitter...........................................................................10
Cable (CATV)/Satellite Connections ....................................................................................................11
Outdoor Antenna Connections ............................................................................................................12
External Audio/Video Connections.......................................................................................................13
VCR Connections...................................................................................................................................14
Setting the Language............................................................................................................................15
Setting the AIR/CATV Menu Option......................................................................................................15
Setting the Channels into Memory ......................................................................................................16
Adding and Deleting Channels ............................................................................................................17
TV Operation .........................................................................................................................................18
• Mute......................................................................................................................................................19
• Sleep.....................................................................................................................................................19
• AV IN Button .........................................................................................................................................19
• Display Button...................................................................................................................................... 19
Closed Captions ...................................................................................................................................20
On-Screen Control Adjustments (Picture)...........................................................................................21
• Personal Preference............................................................................................................................. 21
• Blue Background.................................................................................................................................. 21
Setting Parental Control ...................................................................................................................... 22
• Movie Rating Set Up..............................................................................................................................23
• TV Parental Rating Set Up....................................................................................................................24
• Changing the Password for Parental Control .......................................................................................25
Troubleshooting Guide......................................................................................................................... 26
Reception Disturbances .......................................................................................................................27
Limited Warranty ..................................................................................................................................28
CONTENTS

2
POWER SOURCE
Insert the AC plug (with the 2 blades) into a conveniently located AC outlet having 120V, 60Hz.
NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility of electric shock. If the AC plug does
not fit into a nonpolarized AC outlet, do not file or cut the wide blade. It is the user’s responsibility to have an electrician replace
the obsolete outlet.
AC Plug
AC Outlet
Thank you for purchasing the DORA the Explorer 13" Color TV and Remote Control from
Emerson Radio Corp. Please read this manual before operating this unit to become familiar
with its features and obtain the performance that will bring you continued enjoyment for many
years. In the event you require technical assistance, please call the Emerson Service
Department at: 1-800-695-0098.
For future reference, record the serial number in the space provided.

3
1.Readthese instructions.
2.Keepthese instructions.
3.Heedall warnings.
4.Followinstructions.
5.Donotuse thisapparatusnearwater.
6.Cleanonlywithdrycloth.
7.Donotblock anyventilation openings.Install inaccordancewithmanufacturer’sinstructions.
8.Donotinstall nearanyheatsource suchasradiators,heatregisters,stoves,orotherapparatus(including amplifiers)
thatproduceheat.
9.Donotdefeatthesafetypurpose ofthe polarized orgrounding-type plug.Apolarized plug hastwobladeswithone
widerthan the other.Agrounding type plug hastwobladesand athirdgrounding prong.The wide bladeorthe third
prong areprovided foryoursafety.If the provided plug doesnotfitintoyouroutlet, consultan electrician forreplace
mentofthe oboleteoutlet.
10.Protectthepowercordfrombeing walked onorpinched particularlyatplugs,conveniencereceptacles,and the point
wheretheyexitfromthe apparatus.
11.Onlyuse attachments/accessories specified bythe manufacturer.
12.Use onlywithacart,stand,tripod,bracket,ortablespecified bythe manufacturer,orsoldwiththe apparatus.When a
cartisused,usecaution when moving the cart/apparatuscombination toavoidinjuryfromtip-over.
13.Unplug thisapparatusduring lightning stormsorwhen unused forlong periodsoftime.
14.Referall servicing toqualified servicepersonnel.Servicing isrequired when the apparatushasbeen damaged inany
way,suchasifthe power-supplycordorplug isdamaged,liquidhasbeen spilled orobjectshavefallen intothe apparatus,
the apparatushasbeen exposed torainormoisture,doesnotoperatenormally,orhasbeen dropped.
The lightning flashwitharrow-
head symbol,withinan equilat-
eraltriangle,isintended toalert
the usertothe presenceof
uninsulated “dangerousvoltage”
withinthe product’s enclosure
thatmaybe ofsufficientmagni-
tude toconstituteariskofelec-
tricshock topersons.
Warning:Toreducethe risk of
electricshock,do notremove
cover(orback)no user-
serviceablepartsinside.Refer
servicing toqualified service
personnel.
The exclamation pointwithinan
equilateraltriangleisintended
toalertthe usertopresenceof
importantoperating and main-
tenance(servicing)instructions
inthe literatureaccompanying
the appliance.
lTOPREVENTFIREORSHOCKHAZARD.DONOTEXPOSE THISAPPLIANCETORAINOR
MOISTURE.
lTHISAPPLIANCESHALLNOTBE EXPOSEDTODRIPPINGORSPLASHINGWATERANDTHATNO
OBJECTFILLEDWITHLIQUIDSSUCHAS VASES SHALL BE PLACEDONAPPRATUS.
WARNING
IMPORTANTSAFETYINSTRUCTIONS

4
IMPORTANTSAFETYINSTRUCTIONS
15.RetainInstructions
The safetyand operating instructionsshouldbe retained forfuturereference.
16.Waterand Moisture
Donotusethisproductnearwater-forexample,nearabathtub,washbowl,kitchen sink,orlaundrytub,
inawetbasement, ornearaswimming pooland the like.
17.PowerSources
The productshouldbe operated onlyfromthe type ofpowersourceindicated on the marking label.If
you arenotsureofthe type ofpowersupplytoyourhome,consultyourproductdealerorlocalpower
company.Forproductsintended tooperatefrombatterypower,orothersources,refertothe operating
instructions.
18.Grounding orPolarization
Thisproductmaybe equipped withapolarized alternating-currentline plug (aplug having one blade
widerthan the other).Thisplug will fitintothe poweroutletonlyone way.Thisisasafetyfeature.If you
areunabletoinsertthe plug fullyintothe outlet, tryreversing the plug.If the plug shouldstill fail tofit,
contactyourelectrician toreplaceyourobsoleteoutlet. Donotdefeatthe safetypurposeofthe polarized
plug.AlternativeWarnings-Thisproductisequipped withathree-wiregrounding-type plug,aplug having
athird(grounding)pin.Thisplug will onlyfitintoagrounding-type poweroutlet. Thisisasafetyfeature.
If you areunabletoinsertthe plug intothe outlet, contactyourelectrician toreplaceyourobsoleteoutlet.
Donotdefeatthe safetypurposeofthe grounding-type plug.
19.OutdoorAntennaGrounding
If an outside antenna orcablesystemisconnected tothe product, be surethe antenna orcable
systemisgrounded soastoprovide someprotection againstvoltage surgesand built-up staticcharges.
Article810 ofthe NationalElectricalCode,ANSI/ NFPA 70,providesinformation withregardtoproper
grounding ofthe mastand supporting structure,grounding ofthe lead-inwiretoantenna discharge unit,
sizeofgrounding conductors,location ofantennadischarge unit, connection togrounding electrodes,and
requirementsforthe grounding electrode.See fig.Aon page 6.
20.Lightning
Foradded protection forthisproductduring alightning storm,orwhen itisleft unattended and unused
forlong periodsoftime,unplug itfromthe wall outletand disconnectthe antenna orcablesystem.This
will preventdamage tothe productdue tolightning and powerline surges.
21.PowerLines
Anoutside antenna systemshouldbe located inthe vicinityofoverhead powerlinesorotherelectriclight
orpowercircuits,orwhereitcan fall intosuchpowerlinesorcircuits.When installing an outside antenna
system,extremecareshouldbe taken tokeep fromtouching suchpowerlinesorcircuitsascontactwith
themmightbe fatal.
22.Overloading
Donotoverload wall outlets,extension cords,orintegralconveniencereceptaclesasthiscan
resultinarisk offireorelectricshock.

5
IMPORTANTSAFETYINSTRUCTIONS
23.Objectand LiquidEntry
Neverinsertobjectsofanykind intothisproductthrough openingsastheymaytouchdangerous
voltage pointsorshort-outpartsthatcouldresultinafireorelectricshock.Neverspill liquid
ofanykind on the product.
Donotattempttoservicethe productyourselfasopening orremoving coversmayexposeyou
24.DamageRequiring Service
Unplug thisproductfromthe wall outletand referservicing toqualified servicepersonnelunder
the following conditions:
a.When the power-supplycordorthe plug isdamaged,
b.If liquidhasbeen spilled,orobjectshavefallen intothe product,
c.If the producthasbeen exposed torainorwater,
d.If the productdoesnotoperatenormallybyfollowing the operating instructions.Adjustonly
thosecontrolsthatarecovered bythe operating instructionsasan improperadjustmentof
othercontrolsmayresultindamage and will often requireextensiveworkbyaqualified
technician torestorethe producttoitsnormaloperation,
e.If the producthasbeen dropped,ordamaged inanyway,
f. When the productexhibitsadistinctchange inperformance,thisindicatesaneed forservice.
25.ReplacementParts
When replacementpartsarerequired,be surethe servicetechnician hasused replacementparts
specified bythe manufacturerorhavethe samecharacteristics asthe originalpart. Unauthorized
substitutionsmayresultinfire,electricshock,orotherhazards.
26.SafetyCheck
Upon completion ofanyserviceorrepairstothisproduct, ask the servicetechnician toperform
safetychecks todetermine thatthe productisinproperoperating condition.
27.Wall orCeiling Mounting
The productshouldbe mounted toawall orceiling onlyasrecommended bythe manufacturer.
28.Heat
The productshouldbe situated awayfromheatsourcessuchasradiators,heatregisters,stoves,or
otherproducts(including amplifiers)thatproduceheat.
29.Nonuse Period
If the unitistobe left unused foralong period oftime,unplug the powercord.
30.NoteTo CATVSystemInstaller
Thisreminderisprovided tocall the CATVsysteminstaller’s attention toArticle820-40 ofthe
NECthatprovidesguidelinesforpropergrounding and,inparticular,specifiesthatthe cable
ground shall be connected tothe grounding systemofthe building,asclosetothe pointofcable
entryaspractical.

6
FIGURE A
EXAMPLE OF ANTENNA
GROUNDING ACCORDING TO
NATIONAL ELECTRICAL CODE
INSTRUCTIONS
a. Use No.10 AWG (5.3mm2) copper, No.8 AWG (8.4mm2) aluminum, No.17 AWG (1.0mm2)
copper-clad steel or bronze wire, or larger, as a ground wire.
b. Secure antenna lead-in and ground wires to house with stand-off insulators spaced from
4 - 6 feet (1.22-1.83m) apart.
c. Mount antenna discharge unit as close as possible to where lead-in enters house.
d. Use jumper wire not smaller than No.6 AWG (13.3mm2) copper, or the equivalent, when
a separate antenna grounding electrode is used.
IMPORTANTSAFETYINSTRUCTIONS

7
ONPLACEMENT
*Donotusethe unitinplaceswhichareextremelyhot, cold,dustyorhumid.
*Placethe uniton aflatand even surface.
*Donotrestrictthe air-flowofthe unitbyplacing itinalocation withpoorventilation,by
covering itwithaclothorbyplacing iton acarpet.
ONCONDENSATION
*When left inaheated roomwhereitiswarmand damp,waterdropletsorcondensation
mayforminside the unit.
*When thereiscondensation inside the unit, the unitmaynotfunction normally.
*Letitstand for1to2hoursbeforeturning the poweron,orgraduallyheatthe roomup and
drythe unitbeforeuse.
CAUTION:
RemoveACplug fromwall outletand batteriesfrombatterycompartmentofthe remotecontrolwhen the
unitwill notbe used foraprolonged period.
HIGHVOLTAGE:
Livepartsareaccessiblewhen the rearcoverisremoved.
Pleaseread IMPORTANTSAFETYINSTRUCTIONS
NOTES:
lPeriodicallyinspectfordamage,ifdamaged properlyrepairthe TVbeforeuse.
lAdultsupervision recommended.
IMPORTANTSAFETYINSTRUCTIONS

8
1 POWER Button-Use this button to turn your
TV on or off.
2 Remote Control Sensor-This receiver
receives a signal from your remote control. Do
not block it.
3 MENU Button-Use this button to turn the TV's
menu system on and off.
4 CHANNEL UP (i
i)/DOWN (m m) Buttons-Use
these buttons to change channels on your TV,
or to select items in the menu system.
5 VOLUME UP (k
k) /DOWN (o o) Buttons-Use
these buttons to change your TV's volume, to
activate selections in the menu system, or to
change audio and video settings.
6 VIDEO IN Jack-Use this jack to receive a
video signal from another A/V component.
7 AUDIO IN Jack-Use this jack to receive an
audio signal from another A/V component.
8 EARPHONE Jack-Connect an optional
Earphone/Headphone (not included) to this
jack for private listening.
9 Speaker
LOCATION OF CONTROLS
FRONT

9
1 VHF/UHF IN Jack-Connect a VHF/UHF antenna, CATV, VCR, satellite, etc. cable to this jack. AV button
must be set to TV/CATV.
2 VIDEO IN Jack-Use this jack to receive a video signal from another A/V component.
3 AUDIO IN Jack-Use this jack to receive an audio signal from another A/V component.
1. SLEEP Button
2. PP (Personal Preference) Button
3. CHANNEL UP (i
i)/DOWN (m m)Buttons
4. VOLUME DOWN (o
o) Button
5. DISPLAY Button
6. Direct Channel Selection Buttons (0-9)
7. AV IN Button
8. POWER Button
9. VOLUME UP (k
k) Button
10. MENU Button
11. MUTE Button
12. --Button (For Channels 10-125)
REMOTE CONTROL
LOCATION OF CONTROLS (CONTINUED)
REAR

REMOTE CONTROL (CONTINUED)
10
BATTERY INSTALLATION
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer’s directions.)
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
NOTES:
•When there is an obstacle between the TV and the
transmitter, the transmitter may not operate.
• When direct sunlight, incandescent lamp, fluorescent
lamp or any other strong light shines on the REMOTE
SENSOR of the TV, the remote operation may be
unstable.
Install two (2) “AAA” batteries, paying
attention to the polarity diagram in the
battery compartment.
1 2 3
Loosenthe screw to open the battery
compartment cover.
Screw the battery compartment
cover on the battery compartment.
20 ft
30 30

CABLE (CATV)/SATELLITE CONNECTIONS
11
This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some
Cable TV companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal
viewing requires the use of a descrambler device which is generally provided by the cable company.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
For basic cable TV service not requiring a converter/descrambler box,
connect the CATV 75 ohm coaxial cable to the VHF/UHF jack on the
rear of the TV.
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE OR SATELLITE
If you subscribe to a satellite service or a cable TV service which requires the use of a converter/descrambler box, connect
the incoming 75 ohm coaxial cable to the converter/descrambler or satellite box. Using another 75 ohm cable, connect the
output of the converter/descrambler or satellite box to the antenna jack on the TV. Follow the connections shown below. Set
the TV/VCR to the output channel of the converter/descrambler or satellite box (usually 3 or 4) and use the
converter/descrambler or satellite box to select channels.
INCOMING
75 OHM
CATV CABLE
SPLITTER A/B SWITCH
75 OHM
CABLE
CONVERTER/
DESCRAMBLER
CONVERTER/
DESCRAMBLER OR
SATELLITE BOX 75 OHM CABLE
TO TV/VCR
INCOMING
75 OHM
CATV CABLE
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH SCRAMBLED
PREMIUM CHANNELS
If you subscribe to a satellite service or a cable TV service in which basic channels are unscrambled and premium channels
require the use of a converter/descrambler box, you may wish to use a signal splitter and an A/B switch box (available from the
cable company or an electronic supply store). Follow the connections shown below. With the switch in the “B” position, you can
directly tune any nonscrambled channels on your TV. With the switch in the “A” position, tune your TV to the output of the
converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to tune scrambled channels.
FAQS:
I connected my cable, why can’t I get channels above 69?
Make sure AIR/CATV option is set to CATV, see page 15.Also, make sure your cable company broadcasts channels in the
range you are searching.
Are the cables included?
No, the cables are sold separately; visit your local electronics store.

Connecting the Rod Antenna (not included)
Insert the Rod Antenna on top of the rear cabinet and connect other end to the antenna jack as shown
below.
12
INDOOR ANTENNA CONNECTION
OUTDOOR ANTENNA CONNECTIONS
OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT SUPPLIED)
Follow the instructions for the type of antenna system you intend to use. If using Cable or Satellite, see page 11.
Combination VHF/UHF
Antenna (Single 75 ohm cable
or 300 ohm twin-lead wire)
Separate VHF/UHF Antennas
Combination VHF/UHF
Antenna (Separate VHF and
UHF 300 ohm twin-leads)
Connect the UHF twin-lead wire to a
combiner (NOT SUPPLIED). Connect
the VHF twin-lead to a 300-75 ohm
matching transformer (NOT SUPPLIED).
Attach the transformer to the combiner.
Attach the combiner to the antenna jack.
Connect the 75 ohm cable from the VHF
antenna and the UHF antenna twin-lead
wire to a combiner (NOT SUPPLIED).
Attach the combiner to the antenna jack.
NOTE: If your VHF antenna has a twin-
lead wire use a 300-75 ohm
matching transformer, then
connect the transformer to the
combiner.
Connect the 75 ohm cable from
combination VHF/UHF antenna to the
antenna jack.
OR
If your combination antenna has a 300
ohm twin-lead wire, use a 300-75 ohm
matching transformer (NOT SUPPLIED).
VHF/UHF
75 Ohm
UHF 300 Ohm
VHF 300 Ohm
Combiner
UHF 300 Ohm
VHF 75 Ohm
Combiner
ROD ANTENNA IS NOT SUPPLIED.

13
When you watch a program recorded on another source (VCR, video camera, DVD, etc.), you can use the Audio/Video
input jacks on the front of the TV.
Connect the Audio/Video output jacks of the external unit to the Audio Input jack and the Video Input jack of the TV.
To access the unit connected to these jacks, press the AV IN button so AV appears on the screen. To resume normal TV
viewing, simply press the AV IN button again.
EXTERNAL AUDIO/VIDEO CONNECTIONS
FAQ:
How do I watch the external unit connected to the Audio/Video Input jacks?
Press the AV IN button so AV appears on the screen, then start the external source.
AUDIO/VIDEO Cord (Not Supplied)
EXTERNAL SOURCE

14
VCR CONNECTIONS
Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable (CABLES NOT INCLUDED).
1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.
2. Connect a 75 ohm coaxial cable from the VCR’s 75 ohm OUT jack to the ANT jack on the rear of the TV.
3. Press the AV IN button until regular TV or CATV appears on the TV screen and press PLAY on the VCR to watch a
tape.
1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.
2. Connect the audio cable from the VCR’s Audio OUT jack to the TV’s Audio IN jack. Connect the video cable from the
VCR’s Video OUT jack to the TV’s Video IN jack.
3. Press the AV IN button until AV appears on the TV screen and press PLAY on the VCR to watch a tape.
Follow the instructions below to connect a VCR to your television using Audio/Video cables (CABLES NOT INCLUDED).
NOTE:
Above are basic connection instructions; for detailed connection instructions for external units, refer to the external unit’s
owner’s manual.

SETTING THE LANGUAGE
15
1
1
2
1
1
2
1
2
3
4
This TV can show the On-Screen display in English, Spanish or French.
Press the VOLUME UP (k) 1/DOWN (o) 2 buttons to
select the desired language (English, French or Spanish).
3
Press the MENU button twice or wait 20 seconds to exit the
menu.
1
1
1
4
FAQ:
Will selecting a language change the audio, or only the on-screen menus?
Selecting a language will only change the on-screen menus.
1
2
1
1
SETTING THE AIR/CATV MENU OPTION
1
1
2
3
4
Press the VOLUME UP (k) button 1to set AIR or CATV.
Press the MENU button 2twice to exit the menu.
2
1
12
OPTIONS
AIR: If using a
VHF/UHF
antenna.
CATV: If using Cable
TV.
TV / CATV MODE SELECTION
When shipped from the factory, the TV / CATV menu option
is set to the "CATV" ( Cable Television) mode. If not using
CATV, set this menu option to the "Air" position.
Press the Power button to turn on the TV. Press the
MENU button twice, screen will appear.
1
2
3
4
Press the CHANNEL UP ( ) /DOWN ( ) buttons
to select LANGUAGE.
3
4
Press the Menu buttons twice, Access the Menu screen
as described in step 1 above. Press the CHANNEL UP
( ) /DOWN ( ) buttons to select RECEPTION.
PRESET
LANGUAGE ENGLISH
CHANNEL 2
SKIP OFF
RECEPTION AIR
MEMORIZE CHANNELS
PRESET
LANGUAGE ENGLISH
CHANNEL 2
SKIP OFF
RECEPTION AIR
MEMORIZE CHANNELS
PRESET
LANGUAGE ENGLISH
CHANNEL 2
SKIP OFF
RECEPTION AIR
MEMORIZE CHANNELS
PRESET
LANGUAGE ENGLISH
CHANNEL 2
SKIP OFF
RECEPTION AIR
MEMORIZE CHANNELS

16
1
1
2
1
1
2
1
2
3
4
Press the VOLUME UP (k) button to confirm. The TV will
automatically cycle through all the channels and store
active channels into memory.
2
3
4
3
Press the MENU button twice or wait 20 seconds to exit the
menu.
1
1
1
4
SETTING THE CHANNELS INTO MEMORY
This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channels set into
memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. In
addition to normal VHF/UHF channels, this TV can receive up to 113 Cable TV channels.
FAQs:
How many channels will I actually receive?
The actual number of channels that can be received depends on how many channels your cable company, or local area,
provides. Contact your company to determine the number of channels in your area.
Do channels need to be set into memory before using the CHANNEL UP ( i )/DOWN ( m )buttons?
Yes, the channels must be programmed into memory.
Can I stop memorizing the channels?
Yes, simply press the MENU button.
1
2
Press the Power button to turn on the TV. Set the
AIR/CATV menu option to AIR or CATV (see page
15). The antenna, cable, etc. must be connected
before memorizing channels. Press the MENU button
twice. the PRESET MENU screen will appear.
3
4
Press the CHANNEL UP ( ) /DOWN ( ) buttons
to select MEMORIZE CHANNELS.
PRESET
LANGUAGE ENGLISH
CHANNEL 2
SKIP OFF
RECEPTION AIR
MEMORIZE CHANNELS
PRESET
LANGUAGE ENGLISH
CHANNEL 2
SKIP OFF
RECEPTION AIR
MEMORIZE CHANNELS

1
1
1
ADDING AND DELETING CHANNELS
17
After setting channels into memory, you can add or delete channels as follows:
1
1
2
1
1
4
Press the CHANNEL UP (i) 1/DOWN (m) 2 buttons to
select CHANNEL. Press the VOLUME UP (k)3/DOWN
(o) 4 buttons to select a channel.
2
1
2
3
4
3
When a channel is selected, press the VOLUME UP (k)
1/DOWN (o) 2 buttons to skip (ON will appear) or not to
skip (OFF will appear). Repeat steps 3 to 5 to add or delete
more channels. Press the MENU button ❸to exit.
4
1
2
3
4
Press the MENU button twice or wait 20 seconds to exit the
menu.
5
1
2
3
4
Press the CHANNEL UP (i) 1/DOWN (m) 2 buttons to
select SKIP.
OFF will appear if the channel is not skipped.
ON will appear if the channel is being skipped.
1
2
Press the Power button to turn on the TV. Press
the MENU button twice; the PRESET MENU screen
will appear.
PRESET
LANGUAGE ENGLISH
CHANNEL 2
SKIP OFF
RECEPTION AIR
MEMORIZE CHANNELS
PRESET
LANGUAGE ENGLISH
CHANNEL 2
SKIP OFF
RECEPTION AIR
MEMORIZE CHANNELS
PRESET
LANGUAGE ENGLISH
CHANNEL 2
SKIP OFF
RECEPTION AIR
MEMORIZE CHANNELS
PRESET
LANGUAGE ENGLISH
CHANNEL 2
SKIP OFF
RECEPTION AIR
MEMORIZE CHANNELS

TV OPERATION
18
Adjust the volume level by pressing the VOLUME UP
(k)1/DOWN (o) 2 buttons.
1
2
1
1
3
For proper operation, before selecting channels, they
must be set into the TV’s program memory, see page 17.
Press and release the CHANNEL UP (i) 1/DOWN (m) 2
buttons. The TV automatically stops at the next channel set
into memory. This will not operate if channels are not set
into memory.
Direct Program Selection buttons (0-9)
Use these buttons to select a channel. The channel number
will appear at the top right corner of the screen.
• For Channels 1 through 9, press 1-9 3as desired.
•For Channels 10 through 99, press the -- button 4once,
then the two digits in order.
•For Channels 100 through 125, press the -- button 4
twice, then the three digits in order.
1
2
3
4
3
4
4
Set the AIR/CATV Menu Option as described on page 15.
2
Press the Power button to turn on the
TV.
2
3
4
1
OPTIONS
AIR: If using a VHF/UHF
antenna.
CATV: If using Cable TV.
NOTES:
•When AIR/CATV option is set to AIR, only channels up
to 69 can be selected. When set to CATV, channels
up to 125 can be selected.
• If an invalid channel is selected, the display will revert
to the original channel.
FAQs:
AIR/CATV option must be set to CATV when using cable, see page 15.
Why are some channels scrambled?
You must subscribe to these channels through your cable company.
PRESET
LANGUAGE ENGLISH
CHANNEL 2
SKIP OFF
RECEPTION AIR
MEMORIZE CHANNELS

TV OPERATION (CONTINUED)
19
MUTE SLEEP
AV IN BUTTON
Press the MUTE button 1to turn off the sound. The TV’s
sound will be silenced and MUTE will appear briefly on the
screen. The sound can be turned back on by pressing this
button again or one of the VOLUME UP (k)2/DOWN (o)
3 buttons or the MUTE button 1again.
1
32
1
To set the TV to turn off after a preset amount of time, press the
SLEEP button on the remote, “SLEEP OFF” will appear on the
screen. Each additional press will increase the Sleep time by 5
minutes up to 120 minutes. To confirm remaining sleep time,
press the SLEEP button; the remaining time will briefly appear on
the screen. To cancel the sleep time, press the SLEEP button
repeatedly until “SLEEP OFF” appears on the screen.
1
This TV has an audio/video input as well as a standard
coaxial input for audio/video signals, as described on
pages 8 through 11. To watch standard TV or CABLE,
press the AV IN button until the signal appears in the
display. To watch the source connected to the Audio/Video
jacks, press so AV appears in the display.
1
3
4
3
2
Press the DISPLAYbutton once to display the channel
number and sleep timer. Press again and the text
will disappear.
1
3
4
3
2
DISPLAY BUTTON