EMGA COFFEE QUEEN User manual

*320.002
Powersavingcoffeemachines.
Capacity 1,8 litres or 2 x 1,8 litres.
Simpleinstallationandeasyto use.
User manual
COFFEE QUEEN

320002 en ma 2012 04 1/12

320002 en ma 2012 04 2/12
stnetnocfoelbaT.1 snoitcurtsnI.2 tratsdnanoitallatsnI.3 eeffocfogniwerB.4 ecnanetniaM.5.6tnatropmI
.7noitu
loselbissoP
1. Table of contents
9 - 10
11
12
7 - 8
2
3
4 - 6

320002 en ma 2012 04 3/12
2. Functions.
lower hotplate
Starts brewing
Brew lamp
upper hotplate

320002 en ma 2012 04 4/12
3.1. Placemachine ona flatlevel andwaterproof
surface.
3.2. Electrical coupling
CAUTION!
Connectthe plugtoa separatewall socket.
240V, 13 amp. (230V, 10 amp).
3. Installation and start
Placing machine.

320002 en ma 2012 04 5/12
3.3.
Turnoncontrol switchforlower hotplateand
forupper hotplate.
Ensurethat thelampsturn onand thatthehot
platesget warm.Turnoffcontrolswitches.
3. Installation and start
3.4.
Hotplate function
Upper hotplate
Lower hotplate 3.4.
Do the first brewings with water only.
Tofillingupwater system.
1. Placefilterholder withoutfilter andcoffee.
Liftup thecover andfill the machinewith
freshtapwater.

320002 en ma 2012 04 6/12
3.
3.5. Turn on control switch for brewing.
The control lamp which indicates that brewing is in
progress shall now be lit and the water shall start pouring
through the filter holder into the pot.
Brewing with water only.
I
Lower hotplate
for brewing
Installation and start
Brewing will take about 6 minutes.

320002 en ma 2012 04 7/12
4. Brewing of coffee
4.1.
Place a 90mm filter in the filter holder.
4.2.
Add coffee, restaurant / catering
grounded coffee).
Make sure that the coffee is evenly spread.
4.3.
Place the filter holder.
4.4.
Lift up the lid and pour in a pot of
fresh tap water (1,8L).

320002 en ma 2012 04 8/12
4.5.
Place the pot under the filter holder.
4.6.
Turn on control switch for brewing.

During the brewing,
(about 6 minutes) the brew lamp is lit.
4.7.
If a second brewing is necessary, keep the
first pot at the required temperature by
placing on the upper hot plate.
Turn on control switch.
4. Brewing of coffee.
Upper hotplate
For brewing

320002 en ma 2012 04 9/12
Each day.
Wash the pot and the filterholder with
liquid solution for coffee machines.
Clean the spray nozzle and the
surrounding area. Clean the hot plate.
Use a soft rag and liquid solution that
does not scratch.
Before each brewing.
Rinse the decanter.
CAUTION!
The machine should not be Submerged
in water orWashed in a dishwasher
5. Maintenance

320002 en ma 2012 04 10/12
Each week.
Descaling and cleaning. Pour 50 ml descaling / cleaning solution in a pot and fill it up
with cold water.
Pour the mixture in the machine and proceed with a brewing without a filterpaper or coffee.
Rinse by brewing at least 3 times with clean water so that the particles from descaling
solution disappear.
Regular descaling will ensure optimum brewing performance and a longer life of the machine.
In areas with high level lime problem, a descaling filter should be mounted.
Surface cleaning. Use a soft rag and liquid solution that does not scratch.
When dishing the glasspot in a dishwasher.
Dismantle lid and place glasspot up and
down in dishwasher
Descaling solution
Art.no.110412
5. Maintenance.

320002 en ma 2012 04 11/12
Important.
The machine should stand on a flat surface so that it will function properly.
The machine should be placed on a water-proof surface so that any leakage is easily noticeable.
Do not leave the machine unattended while using.
The machine must be disconnected from electrical supply before any maintenance.
All maintenance and installations must be done of an authorized personel.
WARNING!
TO AVOID BREAKAGE AND INJURY
- Do not boil liquids in pot.
- Do not clean with materials that scratch.
- Do not bump.
- Discard if cracked or schratched.
- Do not pour towards people.
- Do not carry two pots in one hand.
- Wash before using.
6. Important.

320002 en ma 2012 04 12/12
Fault Possible Solution
A. Switch does not light. 1. Check plug connection to wall socket.
2. Check fuse in plug.
3. Check if hot plate becomes warm,
if so replace switch.
B. Hot plate does not become 1. Check connection to element .
warm although switch is lit. 2. If element defective, replace.
C. Brewer omits excess steam. 1. Machine may require descaling.
2. Spray nozzel may need unblocking.
3. Hose, may be bent?
4. Inlet to boiler may be blocked. Descale.
machine - if boiler still defective - replace.
D. Brewing lamp does not 1. Trip-switch has activated - reset with button.
light, machine will not brew. For possible fault / solution see C.
2. Check microswicth.
3. Check float.
E. Brewing lamp is lit but 1. Check connection to boiler.
machine will not brew. 2. Boiler unit may need replacing.
All installations must be done of an authorized personel.
7. Possible solutions.