EMIX EMMA-60B User manual

Public Address System
MP3 AMPLIFIER
EMMA-60B
MIXER AMPLIFIER
OWNER’S MUNUAL
For better use of this equipment, please read this manual carefully before use.
TREBLEBASS
TONE
MIXER AMPLIFIER
POWER
246
OUTPUT
8 10
POWER MP3 DISPLAY
USB
USB VOL AUX1 VOL MIC4 VOL MIC3 VOL MIC2 VOL MIC1 VOL
MIC1 IN
AUX2 VOL
EMMA-60B
OFFON

D
Message on Information of Instructions
The instructions contain the introduction to product function, introduction to appearance,
technical parameters, schematic diagram of connection, safety precautions, and after-sales
service for the broadcasting power amplifier with MP3 /preamplifier in the types of
EMMA-60B. It is necessary to read this manual prior to the connection and application.
The functions and relevant technical parameters described in the
instructions shall be applicable as of the completion of development of this
product. The functions and technical parameters shall be subject to future
change without prior notice.
Please preserve the instructions properly for the future use.

3
Description of Product
EMMA-60B is advanced public address equipment integrating MP3 player, preamplifier and post
power amplifier.
This equipment has two line signal input interfaces, one line signal output interface, and four routes
of the microphone input interfaces, of which the signal from the interface of microphone 1# on the
front panel shall be granted the highest priority level.
Integrating the whole set of the broadcasting program as the small-sized public address system
including the sound source, partition, preamplifier, post power amplifier and volume control and
other functions, this equipment is applicable to the sites needing the public address by the
small-sized public broadcasting system.
Combined power amplifier series with MP3, the preamplifier and post power amplifier.
Plugged with U disc and other memory equipments to provide MP3 sound source.
four microphone inputs, two Line inputs, and one Line output for link.
Muting function.
Individual volume control. Bass and treble tone control.
A five-element LED level meter is provided for the quick and easy visual monitoring of
sound level.

4
FRONT PANEL
TREBLEBASS
TONE
MIXER AMPLIFIER
POWER
2 4 6
OUTPUT
8 10
POWER MP3 DISPLAY
USB
USB VOL AUX1 VOL MIC4 VOL MIC3 VOL MIC2 VOL MIC1 VOL
MIC1 IN
AUX2 VOL
EMMA-60B
OFFON
1
2 3 10 11 12
4 5 6 7 8 9
1. Power switch(power indicator lighting as
ON state)
For main power.
2. LED power indicator
For main power.
3. LED level meter
Indicate output level.
4. Bass control
Adjust bass response.
5. Treble control
Adjust treble response.
6. MP3 output volume control
Adjust treble response.
7. Line volume control
Adjust Line input volume.
8. Mic1-Mic4 volume control
Adjust microphone volume.
9. Mic1 input jack
Connect to microphone of unbalanced
30-600Ωwith 1/4″phone plug. The muting
function is activated while the signal is
sent to Mic1.
10. MP3 Display
11. MP3 USB input jack
12. MP3 Player control button
Note:
When all the five elements (+10dB) of the LED level meter remain lit, it indicates that the sound is
distorted. In a such case, adjust each volume controlling knob, until LED element 4 (+8dB) and LED
element 5 (+10dB) shall flashing.
REAR PANEL
MIC 4MIC 3MIC 2
OUTAUX2AUX1
MUTE
MAX MIN
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SPEAKER OUTPUT
COM 100V
~240V/50Hz/6A
F4AL250V
Nur S icherung2 50V
Use Only With A 250V Fuse
Employer Unlquement Avec
FusibleD e 250V
1 2 3 4 5 6 7
8

Public Address System
MP3 AMPLIFIER
EMMA-120B
MIXER AMPLIFIER
OWNER’S MUNUAL
For better use of this equipment, please read this manual carefully before use.
TREBLEBASS
TONE
MIXER AMPLIFIER
POWER
246
OUTPUT
8 10
POWER MP3 DI SPLAY
USB
USB VOL AUX1 VOL MIC4 VOL MIC3 VOL MIC 2 VOL MIC1 VOL
MIC1 IN
AUX2 VOL
EMMA-120B
OFFON

D
Message on Information of Instructions
The instructions contain the introduction to product function, introduction to appearance,
technical parameters, schematic diagram of connection, safety precautions, and after-sales
service for the broadcasting power amplifier with MP3 /preamplifier in the types of
EMMA-120B. It is necessary to read this manual prior to the connection and application.
The functions and relevant technical parameters described in the
instructions shall be applicable as of the completion of development of this
product. The functions and technical parameters shall be subject to future
change without prior notice.
Please preserve the instructions properly for the future use.

3
Description of Product
EMMA-120B is advanced public address equipment integrating MP3 player, preamplifier and post
power amplifier.
This equipment has two line signal input interfaces, one line signal output interface, and four routes
of the microphone input interfaces, of which the signal from the interface of microphone 1# on the
front panel shall be granted the highest priority level.
Integrating the whole set of the broadcasting program as the small-sized public address system
including the sound source, partition, preamplifier, post power amplifier and volume control and
other functions, this equipment is applicable to the sites needing the public address by the
small-sized public broadcasting system.
Combined power amplifier series with MP3, the preamplifier and post power amplifier.
Plugged with U disc and other memory equipments to provide MP3 sound source.
four microphone inputs, two Line inputs, and one Line output for link.
Muting function.
Individual volume control. Bass and treble tone control.
A five-element LED level meter is provided for the quick and easy visual monitoring of
sound level.

4
FRONT PANEL
TREBLEBASS
TONE
MIXER AMPLIFIER
POWER
2 4 6
OUTPUT
8 10
POWER MP3 DISPLAY
USB
USB VOL AUX1 VOL MIC4 VOL MIC3 VOL MIC2 VOL MIC1 VOL
MIC1 IN
AUX2 VOL
EMMA-120B
OFFON
1
2 3 10 11 12
4 5 678 9
1. Power switch(power indicator lighting as
ON state)
For main power.
2. LED power indicator
For main power.
3. LED level meter
Indicate output level.
4. Bass control
Adjust bass response.
5. Treble control
Adjust treble response.
6. MP3 output volume control
Adjust treble response.
7. Line volume control
Adjust Line input volume.
8. Mic1-Mic4 volume control
Adjust microphone volume.
9. Mic1 input jack
Connect to microphone of unbalanced
30-600Ωwith 1/4″phone plug. The muting
function is activated while the signal is
sent to Mic1.
10. MP3 Display
11. MP3 USB input jack
12. MP3 Player control button
Note:
When all the five elements (+10dB) of the LED level meter remain lit, it indicates that the sound is
distorted. In a such case, adjust each volume controlling knob, until LED element 4 (+8dB) and LED
element 5 (+10dB) shall flashing.
REAR PANEL
MIC 4MIC 3MIC 2
OUTAUX2AUX1
MUTE
MAX MIN
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SPEAKER OUTPUT
COM 100V
~240V/50Hz/6A
F4AL250V
Nur S icherung2 50V
Use Only With A 250V Fuse
Employer Unlquement Avec
FusibleD e 250V
1 2 3 4 5 6 7
8

5
1.
1. 1.
1. Mute control
Adjust muting function.
2.
2.2.
2. Line 1 input and Line 2 input
Connect to linear source equipment.
3. Line output
Connect a recorder
4. Fan Exhaust Window
5. Speaker output 100V
6. AC fuse
Prevent the excessive AC current flow.
7. AC power Input jack
Connect to AC power source.
8. Mic2-Mic4 input jack
Operation Instructions to MP3
plug the U-disc storing MP3 program into USB interface, and the equipment start playing automatically.
Make use of the 12 buttons on the panel of the equipment to select the program to be played and to
control the suspension of playing.
Muting Function
This equipment provides muting function. The inputs from Mic2-Mic4, Line1, Line 2 are automatically muted by
a input from Mic1, as the signal from Mic1 overrides other input signals. The level of
MUTE can be adjusted within the range
from MAX to MIN by adjusting MUTE
control button on the rear panel. It is preset
at MAX before shipping from the factory.
PRECAUTION OF INSTALLATIOM
1 Do not block ventilation holes.
2 The amplifier should not be placed in any of the areas:
1) with poor ventilation;
2) exposed to direct sunlight;
3) with high ambient temperature or adjacent to heat-generating
equipment;
4) with high humidity or heavy dust;
5) susceptible to vibration.
3 Make sure the power outlet conforms to the plug of the unit.
4 Do not use this unit if the electrical power cord is frayed or broken.
MUTE
MAX MIN

6
5Always operate the unit with the AC ground wire connected to the
electrical system’s ground.
6If an alarm rings after the power has been on and the signal has been
fed, there must be an of output short-circuit trouble. In a such case,
please turn the power off. Do not turn on the power again, until the
trouble shall be resolved.
Packing List
No. Specification Quantity
1 5×19 whole machine fixing screw 4
2 SY542 wire (AV terminal audio wire) 1
3 Instructions 1
4 U disc 1
5 Certificate 1
6 Plastic washer 4

7
SPECIFICATIONS
Model EMMA-120B
Rated output 120W
Output regulation Less than 3dB
Speaker output 100V
AUX output 1V
Input Sensitivity
Mic1,2,3,4 : 3mV( ± 0.5mV) unbalanced
Line 1,2 : 300mV( ± 30mV) unbalanced
Frequency response 65Hz-20kHz (
± 3dB)
Distortion Less than 1% at 1kHz , 1/3 rated output voltage
The ratio of
signal to noise ratio
Mic1 ,2,3,4 : Bigger than 80dB
Line 1 、 2 : Bigger than 80dB
Tone
Bass : ± 12dB at 100Hz
Treble : ± 12dB at 10kHz
MP3 Input Sensitivity 230-280mV
Protection AC fuse; DC voltage; overload; short-circuit.
Muting function Mic1 overrides other input signals with
0 ~ -30dB attenuation
Power requirements AC 220-240V/50-60Hz
Power consumption 200W
Dimensions 430
× 300 × 88mm
Gross weight 10kg
Net weight 7kg
Specifications are subject to change without notice
CAUTION
● When the “Power switcher” is off, please pull out the power cord from the socket.
Please keep the equipment out of water.
● To reduce the risk of electric shock, do not remove the cover.
● No user parts inside. Refer servicing to qualified service personnel.
The symbol on rear panel indicates hazardous live. The connection of these
terminals must be operated by the instructed person.The unit connect to the mains by the
plug. Pull out the plug when the unit is in fault or danger status. So the socket for the unit
plugging must be set in the place can be easy to plug into and pull out the plug.

5
1.
1. 1.
1. Mute control
Adjust muting function.
2.
2.2.
2. Line 1 input and Line 2 input
Connect to linear source equipment.
3. Line output
Connect a recorder
4. Fan Exhaust Window
5. Speaker output 100V
6. AC fuse
Prevent the excessive AC current flow.
7. AC power Input jack
Connect to AC power source.
8. Mic2-Mic4 input jack
Operation Instructions to MP3
plug the U-disc storing MP3 program into USB interface, and the equipment start playing automatically.
Make use of the 12 buttons on the panel of the equipment to select the program to be played and to
control the suspension of playing.
Muting Function
This equipment provides muting function. The inputs from Mic2-Mic4, Line1, Line 2 are automatically muted by
a input from Mic1, as the signal from Mic1 overrides other input signals. The level of
MUTE can be adjusted within the range
from MAX to MIN by adjusting MUTE
control button on the rear panel. It is preset
at MAX before shipping from the factory.
PRECAUTION OF INSTALLATIOM
1 Do not block ventilation holes.
2 The amplifier should not be placed in any of the areas:
1) with poor ventilation;
2) exposed to direct sunlight;
3) with high ambient temperature or adjacent to heat-generating
equipment;
4) with high humidity or heavy dust;
5) susceptible to vibration.
3 Make sure the power outlet conforms to the plug of the unit.
4 Do not use this unit if the electrical power cord is frayed or broken.
MUTE
MAX MIN

6
5Always operate the unit with the AC ground wire connected to the
electrical system’s ground.
6If an alarm rings after the power has been on and the signal has been
fed, there must be an of output short-circuit trouble. In a such case,
please turn the power off. Do not turn on the power again, until the
trouble shall be resolved.
Packing List
No. Specification Quantity
1 5×19 whole machine fixing screw 4
2 SY542 wire (AV terminal audio wire) 1
3 Instructions 1
4 U disc 1
5 Certificate 1
6 Plastic washer 4

7
SPECIFICATIONS
Model EMMA-60B
Rated output 60W
Output regulation Less than 3dB
Speaker output 100V
AUX output 1V
Input Sensitivity
Mic1,2,3,4 : 3mV( ± 0.5mV) unbalanced
Line 1,2 : 300mV( ± 30mV) unbalanced
Frequency response 65Hz-20kHz (
± 3dB)
Distortion Less than 1% at 1kHz , 1/3 rated output voltage
The ratio of
signal to noise ratio
Mic1 ,2,3,4 : Bigger than 80dB
Line 1 、 2 : Bigger than 80dB
Tone
Bass : ± 12dB at 100Hz
Treble : ± 12dB at 10kHz
MP3 Input Sensitivity 230-280mV
Protection AC fuse; DC voltage; overload; short-circuit.
Muting function Mic1 overrides other input signals with
0 ~ -30dB attenuation
Power requirements AC 220-240V/50-60Hz
Power consumption 90W
Dimensions 430
× 300 × 88mm
Gross weight 9kg
Net weight 6kg
Specifications are subject to change without notice
CAUTION
● When the “Power switcher” is off, please pull out the power cord from the socket.
Please keep the equipment out of water.
● To reduce the risk of electric shock, do not remove the cover.
● No user parts inside. Refer servicing to qualified service personnel.
The symbol on rear panel indicates hazardous live. The connection of these
terminals must be operated by the instructed person. The unit connect to the mains by the
plug. Pull out the plug when the unit is in fault or danger status. So the socket for the unit
plugging must be set in the place can be easy to plug into and pull out the plug.