EMIX EMRM-812 User manual

1
EMRM-812
Monitor Unit
OWNER’S MANUAL
Before operating, please read this manual completely.
FEATURES
10 amplifier output monitoring.
Amplifier selection switch.
Volume control.
LED level meter.
Built in monitor speaker.
Professional Public Address System

2
Left blank for memo

3
FRONT PANEL
 Power switch (1 is
power on and the
“power LED” is on )
 Power indicator
 Monitor speaker
 LED level meter
 Volume control
 Amplifier selector
switch
REAR PANEL
① 1-10CH input terminals
② DC24V power input
③ AC power input
④ AC fuse.
CONNECTIONS
① ② ③ ④
⑤ ⑥
Matrix
FROM AMP. OF
PA. SYSTEM
④
③
①
②

4
OPERATION
1 Terminal all connections and then turn on the power switch.
2 Adjust the volume control for built in speaker loudness.
3 Select the desired amplifier which wanted to monitor.
4 LED level meter will shows signal strength produce by the selected monitoring amplifier.
SPECIFICATIONS
Input channels
10
Input signal 70V-100VLine
Frequency response
100Hz-15kHz
Signal to noise ratio
80dB
Speaker
2” x 3” audio speaker
Protection
AC fuse
Power Requirement
AC240V/50Hz, DC24V
Dimensions
485 × 88 × 365mm
Gross weight
6.5kg
Net weight
5.2kg
Specifications are subject to be changed without notice.
CAUTION
● When the “Power switcher” is off, please pull out the power cord from the socket.
Please keep the equipment out of water.
● To reduce the risk of electric shock, do not remove the cover.
● No user parts inside. Refer servicing to qualified service personnel.