EMIX EMWS-661W User manual

Public Address System
Wall Mount Speaker System EMWS-661W
OWNER’S MANUAL
Thank you for purchasing PA speaker system of EMIX series. All of EMIX series
products have been tested strictly before shipping. EMIX series PA speaker system is widely
used in hotel, trade building, supermarket, school, entertainment, etc. It’s the most ideal
choice of you! In order to facilitate installing, modulating and running please read this
manual carefully before setup.
FEATURES:
The wall mount speaker is suitable for different public address wires.
It can be switched between the ohms terminal and the voltage
terminal.
Rated power 10W .Max. Sound Pressure Level 100 ±
±±
± 2dB, Effective
Freq. Range 100Hz-20kHz;
Weight 2.8kg, equipped with hanging holes for mounting ;
It is made of high quality engineering plastic, long-term durability,
never out of shape and fade;
Provided with high sensitivity 90 ±
±±
± 2dB, long life, sounds clear and
sonorousness.
FREQ. RESPONSE DISTORTION
(dB SPL 、 1W 、 1m) (THD< 1.5% 1W 、 1m 、 200Hz-12kHz)
INSTALLATION DIAGRAM
This knob is used to Hang the speaker
select the different with the nail on wall.
input voltage.
Connect public address
wire to these two terminals.
Warning: DO NOT switch the knob to the low impedance
terminal (8 Ω
ΩΩ
Ω ) when the speaker is connected with amplifier’s
high impedance output terminal (100V), otherwise the speaker
will be damaged!
www.emix.com.my
4. 5mm
4mm- 6mm
10mm

Public Address System
Wall Mount Speaker System EMWS-662W
OWNER’S MANUAL
Thank you for purchasing PA speaker system of EMIX series. All of EMIX series
products have been tested strictly before shipping. EMIX series PA speaker system is widely
used in hotel, trade building, supermarket, school, entertainment, etc. It’s the most ideal
choice of you! In order to facilitate installing, modulating and running please read this
manual carefully before setup.
FEATURES:
The wall mount speaker is suitable for different public address wires.
It can be switched between the ohms terminal and the voltage
terminal.
Rated power 10W .Max. Sound Pressure Level 100 ±
±±
± 2dB, Effective
Freq. Range 100Hz - 20kHz;
Weight 2.8kg, equipped with hanging holes for mounting ;
It is made of high quality engineering plastic, long-term durability,
never out of shape and fade;
Provided with high sensitivity 90 ±
±±
± 2dB, long life, sounds clear and
sonorousness.
FREQ. RESPONSE DISTORTION
(dB SPL 、 1W 、 1m) (THD< 1.5% 1W 、 1m 、 200Hz-12kHz)
INSTALLATION DIAGRAM
This knob is used to Hang the speaker
select the different with the nail on wall.
input voltage.
Connect public address
wire to these two terminals.
Warning: DO NOT switch the knob to the low impedance
terminal (8 Ω
ΩΩ
Ω ) when the speaker is connected with amplifier’s
high impedance output terminal (100V), otherwise the speaker
will be damaged!
www.emix.com.my
4. 5mm
4mm- 6mm
10mm

Public Address System
Wall Mount Speaker System EMWS-663W
OWNER’S MANUAL
Thank you for purchasing PA speaker system of EMIX series. All of EMIX series
products have been tested strictly before shipping. EMIX series PA speaker system is widely
used in hotel, trade building, supermarket, school, entertainment, etc. It’s the most ideal
choice of you! In order to facilitate installing, modulating and running please read this
manual carefully before setup.
FEATURES:
The wall mount speaker is suitable for different public address wires.
It can be switched between the ohms terminal and the voltage
terminal.
Rated power 30W .Max. Sound Pressure Level 106 ±
±±
± 2dB, Effective
Freq. Range 70Hz - 20kHz;
Weight 4.2kg, equipped with hanging holes for mounting ;
It is made of high quality engineering plastic, long-term durability,
never out of shape and fade;
Provided with high sensitivity 91 ±
±±
± 2dB, long life, sounds clear and
sonorousness.
FREQ. RESPONSE DISTORTION
(dB SPL 、 1W 、 1m) (THD< 1.5% 1W 、 1m 、 200Hz-12kHz)
INSTALLATION DIAGRAM
This knob is used to Hang the speaker
select the different with the nail on wall.
input voltage.
Connect public address
wire to these two terminals.
Warning: DO NOT switch the knob to the low impedance
terminal (8 Ω
ΩΩ
Ω ) when the speaker is connected with amplifier's
high impedance output terminal (100V), otherwise the speaker
will be damaged!
www.emix.com.my
4. 5mm
4mm- 6mm
10mm

Public Address System
Wall Mount Speaker System EMWS-664W
OWNER’S MANUAL
Thank you for purchasing PA speaker system of EMIX series. All of EMIX series
products have been tested strictly before shipping. EMIX series PA speaker system is widely
used in hotel, trade building, supermarket, school, entertainment, etc. It’s the most ideal
choice of you! In order to facilitate installing, modulating and running please read this
manual carefully before setup.
FEATURES:
The wall mount speaker is suitable for different public address wires.
It can be switched between the ohms terminal and the voltage
terminal.
Rated power 50W .Max. Sound Pressure Level 108 ±
±±
± 2dB, Effective
Freq. Range 55Hz - 20kHz;
Weight 7.4kg, equipped with hanging holes for mounting;
It is made of high quality engineering plastic, long-term durability,
never out of shape and fade;
Provided with high sensitivity 91 ±
±±
± 2dB, long life, sounds clear and
sonorousness.
FREQ. RESPONSE DISTORTION
(dB SPL 、 1W 、 1m) (THD< 1.5% 1W 、 1m 、 200Hz-12kHz)
INSTALLATION DIAGRAM
This knob is used to Hang the speaker
select the different with the nail on wall.
input voltage.
Connect public address
wire to these two terminals.
Warning: DO NOT switch the knob to the low impedance
terminal (8 Ω
ΩΩ
Ω ) when the speaker is connected with amplifier's
high impedance output terminal (100V), otherwise the speaker
will be damaged!
www.emix.com.my
4. 5mm
4mm- 6mm
10mm
50050
80
70
100 300200
90
100
1K 2K 3K 5K 20K10K 20020 5030 100
1.000
500 1K 2K 3K 10K5K
0.010
0.032
0.100
0.316
3.162
10.000
300 Hz
Dis t ort ion / %