Enabling Devices 2214 User manual

What It
What It What It
What It
1 2 1 3
4 5
For Technical Support:
For Technical Support:For Technical Support:
For Technical Support:
Call our Technical Service Department
Monday throu h Friday, 9 a.m. to 5 p.m. (EST)
1-800-832-8697
customer_support@enablin devices.com
Suction Speaker #2214
USER’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablin devices.com

Bi sound!
Bi sound!Bi sound!
Bi sound!
We’ve adapted this fabulous water resistant speaker for your iPhone,
Android smartphone or Bluetooth enabled devices. Activate your
switch and the speaker plays, press it a ain and it pauses your music.
Wireless functionality works up to 30 feet. Rechar eable battery lasts
up to 4 hours. Also has a jack for connectin non-Bluetooth devices.
Size: 2½"L x 2½"W x 2½"H. Requires Rechar eable Lithium Ion
Battery (included). Wei ht: ¼ lb.
1. Before usin the adapted speaker please char e the unit by
plu in it into the included USB char in cable and char e via
your computers USB port or with your Bluetooth device’s USB/AC
wall char in wart. The LED li ht on the adapted speaker will li ht
up durin char in and turn off when char in is complete. It will
take approximately 3 hours to fully char e the unit. Please
reference the OEM Guide for more char in options and features.
2. Now that your adapted speaker is full char ed you can pair it with
iPhone, Android smartphone or Bluetooth enabled devices.
Pairin your Speaker
Pairin your SpeakerPairin your Speaker
Pairin your Speaker
1. Turn on the Bluetooth connection on your iPhone, Android
smartphone or Bluetooth enabled device and enable the pairin
mode of the Bluetooth connection. Make sure your device and the
speaker are no more than 3 feet apart.
2. Turn on your speaker and look for the blinkin li ht. When the
adapted speaker is found, your device will display “HMDX
Neutron” from the list of devices, and may be asked to enter the
pairin code. Enter“0000” and press OK to establish the
connection. To clear the parin hold the Play/Pause button for 5
seconds.
3. Note:
Note:Note:
Note: If the pairin process cannot be completed within 2 minutes
after pairin mode is activated, the Adapted speaker will power off
automatically. Please repeat above steps a ain to pair your
Bluetooth enabled device and the adapted speaker.
4. Plu any external capability Switch into the 1/8" jack located on
the side of the adapted speaker. Make sure your switch is plu ed
in all the way, there should be no aps. Your switch will do the
same function as the Play/Pause button on the speaker itself.
Hookin Up Old School Audio
Hookin Up Old School AudioHookin Up Old School Audio
Hookin Up Old School Audio
1. Plu one end of the cord into the speaker and the other into the
headphone, line out or AUX jack on your device.
2. Turn on the speaker.
3. Hit Play on your device and adjust the volume.
4. You will have to control Play/Paus from your device, not the
speaker or your switch.
Char in Info
Char in InfoChar in Info
Char in Info
Flashin RED: Low Battery
RED (when plu ed in): Char in
Li ht turns off (when plu ed in) Char ed
Quick Flash BLUE: Pairin Mode
Slow Flash BLUE: Connected
RED: Hookin up old-school with a cord
Troubleshootin :
Troubleshootin :Troubleshootin :
Troubleshootin : See OEM uide.
Rev
Rev Rev
Rev 4
44
4/7
/7/7
/7/1
/1/1
/17
77
7