ENCLO EC18010 User manual

www.encloscreens.com
Screen Kit
36" W x 44" H
45 min
Approximate assembly
time for 2 screens
Scan the QR code
for an assembly video
VER. 090721
ASSEMBLY
INSTRUCTIONS
EC18010 WHITE COLOR
EC18011 CEDAR COLOR
Waverly

www.encloscreens.com
2
ASSEMBLY INSTRUCTIONSEC18010
jCheck the inside of the larger pieces in your box for other
materials packed inside.
jWhen assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
jWe recommend an area approximately 5’x 8’for unobstructed
assembling.
jYou should not need to use excessive force when assembling
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging and
handling of this product, occasionally problems occur. If you discover
any missing, damaged, or defective parts, please visit our website to
order replacement parts. If you experience any further trouble with
your product, please contact our customer service department.
parts.nychbrands.com
[e-mail]
704-892-5222 /877-234-6196
Customer service agents are available to take calls weekdays from 9am-5pm EST.
If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item number
EC18010 and the specic part name which can be found on page 4. It
is helpful if you can provide the batch lot which is a stamped number
on the end of the box.
If you are having problems with the assembly or installation of this
product, we are happy to assist you with the process, so please give
us a call at 704-892-5222 / 877-234-6196
If for some reason you need to return this product, please allow
us to help resolve your issues rst. If you still decide to return the
product, you will need to initiate the return from the company you
originally purchased from.
GENERAL
INFORMATION
MISSING OR
DAMAGED PARTS?
NEED ASSEMBLY
HELP?
NEED TO RETURN?
IMPORTANT

www.encloscreens.com 3
ASSEMBLY INSTRUCTIONS EC18010
Detailed Product Dimensions & Specifications
44 in
1/4 in
7/8 in
36 in
10 in
4 1/4 in
1 1/4 in
33 in

www.encloscreens.com
4
ASSEMBLY INSTRUCTIONSEC18010
Joiner Clip (2)
⁄" x ¾" x 1 ¾"
Slat (22)
.4" x 2.875" x 35⁄"
¾” Self-Drilling Stainless
Steel Screw (28)
Left Post (2)
1 ½" x 1 ½" x 44"
Right Post (2)
1 ½" x 1 ½" x 44"
STEP 1: LAY OUT MATERIALS
A B
E
C
G
F
D
Ground Stake (4)
¾" x 1 ¼" x 14"
Rail (4)
⁄" x 1½" x 35⁄"

www.encloscreens.com 5
ASSEMBLY INSTRUCTIONS EC18010
STEP 2: ASSEMBLE THE PANEL
STEP 2.1 STEP 2.2
C
D
1. Slide (2) Rails (C) into the routed holes in the
Left Post (D).
2. Slide (11) Slats (B) into the angled slots in
the left post.
1. Slide (1) Right Post (E) over the opposite
ends of the slats and rails. Ensure the rails
and slats are tight to the back of both posts
and that the unit is square before driving in
screws.
2. Drive (8) total ¾" Self-Drilling Stainless Steel
Screw (G) into the pre-drilled holes in the
posts.
B
2
1
2
1
E
G

www.encloscreens.com
6
ASSEMBLY INSTRUCTIONSEC18010
STEP 3: INSTALL THE GROUND STAKES
STEP 3.1
1. Slide (2) Ground Stakes (A) up into the bottom of the posts until the pre-drilled
holes in the stakes and posts align.
2. Drive (4) total ¾" self-drilling stainless steel screw into the pre-drilled holes.
21
A
STEP 4: ASSEMBLE THE SECOND SCREEN PANEL
STEP 4.1
bRepeat Steps 2-3 in order to assemble the second screen.
Align
Align

www.encloscreens.com 7
ASSEMBLY INSTRUCTIONS EC18010
1. If your ground is too hard, loosen the top 6" or 7" of the ground with a claw
hammer as illustrated.
2. Add water to the loosened soil.
3. Use a block of wood to protect the top of the post and gently hammer the
post into the ground.
2
1
STEP 5: INSTALL PANELS IN THE GROUND
STEP 5.1
STEP 5.2
1. Move the screen to its nal
location, and identify the
location of the posts.
2. Attempt to push the unit
into the ground. All 10" of
the ground stakes should
go in the ground.
3. Ensure the unit is properly
leveled.
3

www.encloscreens.com
8
ASSEMBLY INSTRUCTIONSEC18010
1
1
2 3
STEP 5.3
Optional in hard ground: If your ground is too hard, or you have more than 3 or 4
panels to install, please consider these options:
1. Use a 1¾” diameter auger bit (commonly used for planng tulips) as illustrated
($15-$20 on Amazon.com).
2. Drill a hole about 12” to 16” deep at the desired locaon, and ll the holes
with water as illustrated.
3. Push the panel posts into the holes.

www.encloscreens.com 9
ASSEMBLY INSTRUCTIONS EC18010
STEP 6: CONNECT THE SCREENS
STEP 6.1
1. Straight Line Application: Connect the screens as shown below using Joiner Clips (F) and
¾" self-drilling stainless steel screws.
2. Corner Application: Connect the screens as shown below using Joiner Clips (F) and ¾"
self-drilling stainless steel screws.
2
1F
F
F
F

www.encloscreens.com
[e-mail]
704-892-5222
877-234-6196
6935 Reames Rd. Ste. K.
Charlotte, NC 28216
VER. 090721
ASSEMBLY
INSTRUCTIONS
EC18010 WHITE COLOR
EC18011 CEDAR COLOR