ENCLO Richmond EC18008 User manual

www.encloscreens.com
Screen Kit
38" W x 42" H
45 min
Approximate assembly
time for 2 screens
Scan the QR code
for an assembly video
VER. 072021
ASSEMBLY
INSTRUCTIONS
EC18008
Richmond

www.encloscreens.com
2
ASSEMBLY INSTRUCTIONSEC18008
jCheck the inside of the larger pieces in your box for other
materials packed inside.
jWhen assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
jWe recommend an area approximately 5’x 8’for unobstructed
assembling.
jYou should not need to use excessive force when assembling
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging and
handling of this product, occasionally problems occur. If you discover
any missing, damaged or defective parts, please visit our website to
order replacement parts. If you experience any further trouble with
your product, please contact our customer service department.
parts.nychbrands.com
[e-mail]
704-892-5222 /877-234-6196
Customer service agents are available to take calls weekdays from 9am-5pm EST.
If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item number
EC18008 and the specic part name which can be found on page 4. It
is helpful if you can provide the batch lot which is a stamped number
on the end of the box.
If you are having problems with the assembly or installation of this
product, we are happy to assist you with the process, so please give
us a call at 704-892-5222 / 877-234-6196
If for some reason you need to return this product, please allow
us to help resolve your issues rst. If you still decide to return the
product, you will need to initiate the return from the company you
originally purchased from.
GENERAL
INFORMATION
MISSING OR
DAMAGED PARTS?
NEED ASSEMBLY
HELP?
NEED TO RETURN?
IMPORTANT

www.encloscreens.com 3
ASSEMBLY INSTRUCTIONS EC18008
Detailed Product Dimensions & Specifications
Ground
38 5/8 in
36 1/8 in
12 in
42 1/8 in 40 3/4 in
2 1/4 in
2 3/4 in

www.encloscreens.com
4
ASSEMBLY INSTRUCTIONSEC18008
Joiner Clip (2)
⁄" x ¾" x 1 ¾"
1” Stainless Steel
Screw (20)
Left Post (2)
1 ¼" x 1 ¼" x 42"
Right Post (2)
1 ¼" x 1 ¼" x 42"
Post Cap (4)
STEP 1: LAY OUT MATERIALS
Wood Assembly Spacer (2)
A B
D
G
I
H
C
E F
Top View Top View
Top Board (2)
⁄" x 2⁄" x 38"
Post Anchor (4)
⁄" x 1 ⁄" x 17"
Board (26)
⁄" x 3" x 38"

www.encloscreens.com 5
ASSEMBLY INSTRUCTIONS EC18008
STEP 2: INSERT BOARD
bOrient the Left Post (C) and the
Right Post (D) as shown below.
bInsert (1) Board (E) into
the grooves of the bottom
of the left and right post.
STEP 2.1 STEP 2.2
Preview
CD
Ensure Screw
Holes Align Align
E
NOTE: The end of
each post marked
with a sticker is
the top.

www.encloscreens.com
6
ASSEMBLY INSTRUCTIONSEC18008
STEP 3: FASTEN POST ANCHORS
1. Insert (2) Post Anchors (G), into the posts until the pre-drilled holes
in the anchors and posts align.
2. Drive (4) 1" Stainless Steel Screws (I) into the pre-drilled holes in the
posts to secure the board and post anchors.
bUse (2) Wood Assembly
Spacers (B) to align the board
with the four pre-drilled post
holes. The spacers can be
removed after the height of the
bottom board is established.
STEP 3.1
STEP 3.2
Align
Preview
Preview
21
B
Flush
G
I

www.encloscreens.com 7
ASSEMBLY INSTRUCTIONS EC18008
STEP 4: COMPLETE THE FIRST SCREEN
1. Insert (1) Top Board (F)
into the grooves of the
top of the left and right
post.
2. Drive (2) 1" stainless
steel screws into the
pre-drilled holes in the
posts to secure the top
board.
1. Insert (1) board into the
grooves of the top of
the left and right post.
2. Repeat Step 4.1 until
all boards have been
inserted.
STEP 4.1 STEP 4.2
Preview
22
11
F

www.encloscreens.com
8
ASSEMBLY INSTRUCTIONSEC18008
1. Move the screen to its nal location and identify where the posts are located.
Attempt to push the unit into the ground as illustrated.
b(Optional)
2. If your ground is too hard, loosen the top 6" or 7" of the ground with a claw
hammer as illustrated.
3. Add water to loosened soil.
4. Use a block of wood to protect the top of the post and gently hammer the
post into the ground.
bRepeat Steps 2-4 in
order to assemble
the second screen.
3
2
STEP 5: ASSEMBLE THE SECOND SCREEN
STEP 6: INSTALLING THE SCREEN IN THE GROUND
STEP 5.1
STEP 6.1
1Push down on the
top of the posts
with both hands.
4

www.encloscreens.com 9
ASSEMBLY INSTRUCTIONS EC18008
b(Optional)
bIf your ground is
too hard, dig a
hole 8" in diameter
and 14" deep to
accommodate one
post from each
screen as shown
below.
bLevel the screen as
necessary, backll
excavated dirt, and
tamp if needed.
STEP 6.2
STEP 6.3
14"
8"

www.encloscreens.com
10
ASSEMBLY INSTRUCTIONSEC18008
STEP 7: CONNECT THE SCREENS
STEP 7.1
1. Straight Line Application: Connect the screens as shown
below using Joiner Clips (H) and 1" stainless steel screws.
2. Corner Application: Connect the screens as shown below
using Joiner Clips (H) and 1" stainless steel screws.
H
H
H
H
2
1

www.encloscreens.com 11
ASSEMBLY INSTRUCTIONS EC18008
STEP 8: INSTALL POST CAPS
bInstall (4) Post Caps (A) into the
tops of the posts.
STEP 8.1
A

www.encloscreens.com
[e-mail]
704-892-5222
877-234-6196
6935 Reames Rd. Ste. K.
Charlotte, NC 28216
VER. 072021
ASSEMBLY
INSTRUCTIONS
EC18008