ENCLO ZP19074 User manual

v
www.encloscreens.com
Wilmington
45 min
Approximate assembly time
Scan the QR code
for an assembly video
ASSEMBLY
INSTRUCTIONS
ZP19074
VER. 091222
Screen Kit
36" W x 45" H

www.encloscreens.com
2
ASSEMBLY INSTRUCTIONS
kCheck the inside of the larger pieces in your box for other
materials packed inside.
kWhen assembling components, place on a non-abrasive
surface (i.e. shipping box) to avoid scratching.
kWe recommend an area approximately 5’x 8’ for
unobstructed assembling.
kYou should not need to use excessive force when assembling
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging
and handling of this product, occasionally problems occur. If you
discover any missing, damaged or defecve parts, please visit
our website to order replacement parts. If you experience any
further trouble with your product, please contact our customer
service department.
parts.nychbrands.com
[email protected]om
704-892-5222 /877-234-6196
Customer service agents are available to take calls weekdays from 8am-
5pm EST. If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item
number EC18019 and the specic part name which can be found
on page 4. It is helpful if you can provide the batch lot which is a
stamped number on the end of the box.
If you are having problems with the assembly or installaon of
this product, we are happy to assist you with the process, so
please give us a call at 704-892-5222 / 877-234-6196.
If for some reason you need to return this product, please
allow us to help resolve your issues rst. If you sll decide to
return the product, you will need to iniate the return from the
company you originally purchased from.
GENERAL
INFORMATION
MISSING OR
DAMAGED PARTS?
NEED
ASSEMBLY
HELP?
NEED TO
RETURN?
IMPORTANT
ZP19074

www.encloscreens.com
3
ASSEMBLY INSTRUCTIONS ZP19074
2 5/8 in
33 3/8 in
43 in
45 1/2 in
1 in
36 1/2 in
Detailed Product Dimensions & Specifications
10in

www.encloscreens.com
4
ASSEMBLY INSTRUCTIONS
Middle Rail (1)
1½" x 1½" x 36½"
Joiner Clip (2)
Rail End Cap (6) (3
installed, 3 loose)
Top and Boom Rail (2)
1½" x 1½" x 36½"
Post (2)
⅞" x 1½" x 44"
Post Cap (2)
Picket (14)
¼" x 1¼" x 40"
STEP 1: LAY OUT MATERIALS
J
I
HA
B C
D E
F G
¾" Self-Tapping
Stainless Steel Screw (16)
Post Anchor (2)
¾" x 1¼" x 16" 1/8" Steel Drill Bit (1)
ZP19074

www.encloscreens.com
5
ASSEMBLY INSTRUCTIONS ZP19074
STEP 2: ASSEMBLE SCREEN FRAME

two Posts (B) as
illustrated, and
slide the top and
middle rails down
over the posts
(towards the locking
tabs).
Align the pre-drilled holes in the
posts with the pre-dilled holes in the
top and middle rails. Fasten together
using (8) ¾" Self-Drilling Stainless
Steel Screws (I).
Guide (14) Pickets (C)
down through the top and
middle rails. Push down

pickets lock into place.
Note: Top and Boom Rails only have picket holes on one side.
Top of screen
Align holes
B
G
D
E
D
C
I
 (D) and
Middle Rail (E)
Rail End Caps (G) into the ends of each rail.
STEP 2.1
STEP 2.2 STEP 2.4
STEP 2.3
ZP19074

www.encloscreens.com
6
ASSEMBLY INSTRUCTIONS
STEP 3: FINISH



rail with the pre-drilled holes in the
posts. Insert each picket into the

STEP 3.1 STEP 3.2
ZP19074
F
1. Slide the Post Anchors (F)
pre-drilled hole in the anchor aligns with the pre-
drilled hole in the post.
2. 
into the pre-drilled holes in the posts.
3. (J) to drill (4) total holes in
the post anchor through the pre-drilled holes in

4. 

1
3
Align
2
4
J

www.encloscreens.com
7
ASSEMBLY INSTRUCTIONS ZP19074




ground as illustrated. All 10" of the
post anchors should be inserted into
the ground, so that they are no
longer visible.
STEP 4: POSITION AND INSTALL SCREEN
STEP 4.1
STEP 4.2
ZP19074

www.encloscreens.com
8
ASSEMBLY INSTRUCTIONS
1. Loosen the top 6” or 7” of the ground
with a claw hammer as illustrated.
2. Add water to loosened soil.
3. Use a block of wood to protect the top
of post, and gently hammer the post into
the ground.

3
1
2
STEP 4.3
ZP19074

www.encloscreens.com
9
ASSEMBLY INSTRUCTIONS ZP19074
1
1
2 3
STEP 4.4
Oponal in hard ground: If your ground is too hard, or you have more than 3 or 4

1. 
($15-$20 on Amazon.com).
2. 
with water as illustrated.
3. Push the panel posts into the holes.
ZP19074

www.encloscreens.com
10
ASSEMBLY INSTRUCTIONS
Level the screen as

excavated dirt.

is really hard, you may need to dig a hole large
enough to accommodate one post into hole -
Approximately 8” in diameter and 10” deep
and compact the dirt.
Level
STEP 4.5
STEP 4.6
ZP19074

www.encloscreens.com
11
ASSEMBLY INSTRUCTIONS ZP19074
90° degree


panels, fasten screens together
with Joiner Clips (H) using the

screws as illustrated.
45° degree

STEP 5: FASTEN JOINER CLIPS
J
H
STEP 5.1
ZP19074

www.encloscreens.com
12
ASSEMBLY INSTRUCTIONS
Push the Post Caps (A)
down over the posts to
lock into place.
STEP 6: FASTEN POST CAPS
A
STEP 6.1
ZP19074

www.encloscreens.com
[e-mail]
704-892-5222
877-234-6196
6935 Reames Rd. Ste. K.
Charlotte, NC 28216
ASSEMBLY
INSTRUCTIONS
ZP19074
VER. 091222