Enclume PR41 User manual

PR41-GIANT WHISK POT RACK
Enclosed you will find everything needed for the assembly
and use of your storage rack. Two people make assembly
and installation easier. The parts and hardware included are:
Rack Components included: Hardware included:
1– Cluster of 8 Whisk wires 1– Large Allen wrench
1– Whisk handle 1– Open/closed-end wrench
1– Round nose plate (8 bolts and nuts) 2– 2” S-style chain hooks
1– Nose hanger 2– Lengths of 3/16” chain, one 6” long and other 12”
10– S-style pot hooks 2– Ceiling screw hooks (for wood mounting)
10– Pot hook clamps 1 – Two-point, 3/8” Toggler Set, with two Togglers and two machined ceiling hooks,
(for dry wall mounting)
,
ASSEMBLY AND INSTALLATION INSTRUCTIONS for YOUR PR41 WHISK RACK
1) The small end of the Whisk wire cluster has been inserted into the Whisk handle – so stand the cluster on end with the
handle down. Lightly tighten the cluster inside the handle using the large Allen wrench inserted into the base of the cluster.
2) Slowly spread the wires out and begin inserting the ends into the nose plate. Follow the order set out below. As the tops of
the wires are set into the nose plate tighten the underside nuts with the open/closed end wrench
Step3
STEP 1 STEP 2 STEP 3 STEP 4
See reverse side to continue ASSEMBLY AND INSTALLATION INSTRUCTIONS
Thank you for choosing Enclume!
Enclume racks are the ultimate quality,
design, strength and function.
WARNING: READ ALL OF THE
INSTRUCTIONS BEFORE
ASSEMBLING AND USING YOUR
RACK
If you need help, please call 1-877-ENCLUME
Enclume Design Products
24 Colwell Street, Port Hadlock, WA 98339
Phone [phone] Fax [phone]
www.enclume.com

3) Make sure all eight Whisk wires are spread evenly around the nose plate, and then tighten all nuts to tightly secure the wires
in the nose plate.
4) The next step is to tighten firmly the wire cluster in the handle. But before you do, please note the diagram below. The
eyehook already installed in the back of the handle must be lined-up between a pair of wires. This will allow the eyehook to
have the same placement as the nose hanger in front – and the Whisk will then hang straight. We all want this!
.
5) With your Whisk lying down horizontally, measure the ceiling mounting distance between the eyehook at the rear of the
handle and where nose hanger fits snugly on two adjacent wires. Now with this distance mark holes in your ceiling in the
area you are going to hang your Whisk.
6) We recommend that you anchor your rack into the solid wood of ceiling joists or beams. Carefully measure the area where
the rack is to be hung and install the ceiling screw hooks directly into the wood joists. If it is not convenient to hang your
rack directly into wood joists you may use the included DRYWALL anchors enclosed with your rack. See Toggler® brand
manufacturer recommendations for weight limits included in the instructions in the Toggler kit.
7) Next hang the two lengths from the ceiling hooks you have installed – the 6” length to the front and the 12” length to the
rear. Now insert a 2” S-style hook into the end of each chain length. Hold up the Whisk body and insert the 2” S hook on
the longer chain into the eyehook at the handle and insert the other 2”S hook into the nose hook
10) Hanging your cookware and utensils on the curved Whisk wires is accomplished using the enclosed pot hook clamps and
S-style pot hooks. First slip the large end of a clamp over a Whisk wire, then squeeze the small ends to together, and then slip
When you are done, the mounted hooks should look like this:
11) Your Whisk is manufactured of chrome-plated steel. This finish will provide you years of use beauty and utility in normal
use. Cleaning is easily done with a damp cloth, dry thoroughly.
It is important that your rack is assembled and installed correctly. If the unit is assembled or
installed incorrectly, it could become unstable and collapse, possibly causing injury.
Limited Warranty: This product is warranted to be free of material defects for a period of five years from the date of purchase.
Your exclusive remedy is the repair or replacement of the defective product, and this remedy is subject to the following conditions:
(1) receipt of a notice of defect by Enclume within the warranty period, and (2) your return of the defective product to Enclume
Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within 20 days following the issuance of a return
authorization number to you by Enclume (which may be obtained by telephoning Enclume at the number at the top of these
instructions). There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE PURCHASE OR USE OF ENCLUME'S
PRODUCTS.
WARNING