The manufacturer cannot be held responsible if the machine has been modified in an
unauthorized manner or in such a way as to constitute a finaldamage.
Observe the nature of the area where the work is being performed.
When cutting, make sure you have good lighting.
Ensure your stability when working on slopes or on irregular surfaces or in the presence
of moisture, snow or frost.
Do not allow unauthorized persons to approach the machine. Visitors and spectators,
especially children, the sick or the disabled, must not have access to the work area.
Take precautions when storing the tool. When the machine is not in use, it must be stored
in a dry, if possible high or protected place, in order to prevent access.
Use the tool for the tasks you want to perform. In this context, it is advisable, for example,
to avoid using a tool or a small accessory for a job requiring the use of a heavytool.
Use the tool only for the purpose for which it was designed.
Wear appropriate clothing. Your outfit should be appropriate to work and not bother you.
Wear protective clothing that protects against cuts.
Use personal protective equipment. This includes at least: safety shoes, goggles, ear
protectors, protective gloves, etc.
Never use an unsafe cutting tool. There is a risk of injury from projectedobjects.
Before starting the trimmer, remove all the keys and check that the tool is securely
assembled.
Stay alert at all times. Be attentive to what you are doing. Make use of your common
sense. Do not use the tool when you are tired. Do not use the tool under the influence of
alcohol, drugs or drugs that alter or decrease concentration. Also, do not use the tool
when you are sick.
After using the machine for an extended period of time, you may experience circulation
problems in your hands. Extend the duration of use by wearing appropriate gloves and
taking regular breaks. Please note that the running time of the motorized machine is
shortened due to user discomfort due to poor circulation, too low outside temperature or
excessive machine driving power during the works.
Take account of damaged components. Check the machine before using it. Damaged
components must be repaired or replaced as soon as possible by authorized persons.
Defective switches must be replaced by an authorized dealer. Do not use the machine if it
cannot be turned off or turned on with a switch. When repairs are required, please contact
your nearest dealer.
Before any adjustment or maintenance operation, the motor must always be switchedoff.
Use only approved components. Use only identical replacement parts as replacements
during maintenance or repair work. Contact your authorized dealer for advice. Do not use
metal swivel chains and flail blades.
When transporting and storing the tool, make sure it is secure. Put the protective device
on the blade when the machine is to be transported, stored, cleaned andmaintained
To avoid damage or injury, be careful when handling and transporting the tool. Do not
forget to put the protective device on the blade each time.
Do not use the device when you are tired, sick under the influence of alcohol ordrugs.
Use only accessories and protections recommended by the manufacturer. It is
recommended that your dealer provide a list of recommended accessories if necessary.
Use of parts not recommended by the manufacturer may result in personal injury,
accident and malfunction of the tool.
Maintain a good balance when using the tool. Stay firm feet on the ground so as not to fall.
Do not lean too much, do not put yourself in positions that may unbalance and hurt you.
Use the harness supplied with the tool.
Periodically check that the cutting elements stop when the machine is idling.
