EnergyFit SKI-ROW User manual

SAFETY PRECAUTIONS & INSTRUCTIONS
Every Ski-Row is built for maximum safety and meets or exceeds all applicable domestic and
international standards. However, certain precautions must be taken when operating any piece of
tness equipment. Always follow basic safety precautions when using this product to reduce the
chance of injury, re, or damage.
Intended Use
• The Ski-Row may be used for rowing, skiing, or other functional training exercises.
• The Ski-Row is appropriate for residential and commercial use.
• The Ski-Row may be used only for its intended use.
• Any additional uses may result in serious personal injury and/or property damage.
Spacing Requirement
• The minimum spacing recommendations are based on a combination of the ASTM (U.S.) voluntary
standards and EN (European) regulations as of March 1, 2017, for access, passage around, and
emergency dismount: a minimum of 0.5 m (19.7 in.) to the left, right and front, and 2.0 m (79.0 in.)
behind the Ski-Row.
• Consider carefully the requirements of the Americans with Disabilities Act (ADA), US Code 28 CFR
(see Section 305). ASTM standards are voluntary and may not reect current industry standards.
The actual area for access, passage around, and emergency dismount is the responsibility of the
facility. The facility should consider the total space requirements for training on each unit, voluntary
and industry standards, and any local, state, and federal regulations. Standards and regulations are
subject to change at any time.
Instructions for Owners
• Read all product documentation before operating the unit.
• Save this document and the assembly and console instructions for future reference.
• Assembly of Technical Items: Assembly of the Ski-Row should be performed by a qualied
technician. A signicant amount of technical knowledge is required for the safe and complete
assembly of the unit. Many retailers will offer delivery and assembly as part of the sales agreement.
If this unit was sold unassembled (in the cartons) and you do not feel you can perform the assembly
successfully, please call your dealer for service. Service calls for improper assembly are not
covered by the Warranty Policy and any associated charges will be the responsibility of the owner.
• Do not use accessory attachments that are not recommended by EnergyFit. Such attachments may
cause injuries.
• Assemble and operate the Ski-Row on a solid, level surface.
• Any warning label(s) attached directly to the Ski-Row must remain installed. If a warning label
becomes illegible or damaged, please contact EnergyFit for a replacement.
• Maintain the Ski-Row to keep it in good working condition, as described in this manual. Inspect the
Ski-Row for incorrect, worn, or loose components, and then correct, replace, or tighten prior to use.
• If you plan to move the Ski-Row, use proper lifting techniques.
• Do not attempt to service the Ski-Row yourself, except to follow the maintenance instructions in this
manual.
Instructions for Owners and Users
Before beginning any tness program, you should obtain a thorough medical exam from your
physician, particularly if you have high blood pressure, high cholesterol, diabetes, chronic respiratory
illness, or heart disease; are pregnant; have a family history of any of the preceding conditions; are
over the age of 45; smoke; are obese; have not exercised regularly in the past year; have other
chronic illnesses or physical impairments; or are taking any medication. If you experience dizziness,
chest pains, nausea or any other abnormal symptoms while utilizing the Ski-Row, stop immediately.
Consult a physician before continuing.
When using Ski-Row, you should always take basic precautions, including the following:
• The Ski-Row should not be used without prior instruction by qualied personnel.
• Do not use while under the inuence of alcohol, drugs, or narcotics.
• Do not allow children, or people unfamiliar with the operation of this Ski-Row, on or near it. Do not
leave children unsupervised around the Ski-Row.
• Do not allow children under the age of 16 to use the Ski-Row.
• Do not allow animals on the Ski-Row.
• Examine the Ski-Row for loose or worn parts before each use. Tighten/replace any worn or loose
components prior to use.
• Do not use outdoors.
• Heart rate monitors are not medical devices. Various factors, including the user’s movement,
may affect the accuracy of the heart rate readings. The heart rate monitors are intended only as
exercise aids in determining heart rate trends in general.
• When using the Ski-Row in the Skiing conguration always stand within the U-shaped support leg
boundary.
• Face the console and do not lean on or pull on the console at any time.
• Never drop or insert objects into any opening.
• Keep hands away from moving parts.
• Wear proper exercise clothing and shoes for your workouts and avoid loose or dangling clothing.
Tie long hair back. Do not wear shoes with heels, and check the soles of your shoes to remove any
dirt and embedded stones.
• Save these instructions.
TECHNICAL SPECIFICATIONS
AND USE GUIDELINES
Transporting the Ski-Row
• The Ski-Row can only be moved in the Ski conguration (i.e.
Beam Upright and locked).
• If the Ski-Row is in the Row conguration, lift the beam upright
until it locks into the Ski position.
• Grasp the main U-shaped support leg and tilt the unit to a
comfortable position using a proper lifting techniques.
• Roll the unit into place and lower the unit using a proper
technique.
SPECIFICATIONS
• Weight: 66.8 Kg (147 lbs)
• Power Requirements: Four 1.5 VDC “C” Size (or R14) Alkaline Batteries
• Weight Restrictions: 158.8Kg (350lbs)
REGULATORY INFORMATION
Federal Communication Commission Interference Statement
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in an individual
installation.
• If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the Ski-Row and the affected receiver.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued
compliance, any changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the
radiator and your body. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter.
IC Statement
This device complies with Industry Canada license-exempt RSS-210 standard. Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Hazardous Materials and Proper Disposal
The batteries within self-powered equipment contain materials considered hazardous to the environment.
Federal law requires proper disposal.
Product Recycling and Disposal
This equipment must be recycled or discarded per applicable local and national regulations. Product labels,
in accordance with European Directive 2002/96/EC concerning waste electrical and electronic equipment
(WEEE), determine the framework for the return and recycling of used equipment as applicable throughout
the European Union. The WEEE label indicates that the product is not to be thrown away, but rather
reclaimed upon end of life per this Directive. In accordance with the European WEEE Directive, electrical and
electronic equipment (EEE) is to be collected separately and to be reused, recycled, or recovered at end of
life. Users of EEE with the WEEE label per Annex IV of the WEEE Directive must not dispose of end of life
EEE as unsorted municipal waste, but use the collection framework available to customers for the return,
recycling, and recovery of WEEE. Customer participation is important to minimize any potential effects of
EEE on the environment and human health due to the potential presence of hazardous substances in EEE.
For proper collection and treatment, contact EnergyFit Customer Support.
DIMENSIONS
2617mm (103.0”)
887mm (34.9”)
1032mm (40.6”)
1360mm (53.6”)
2138mm (84.2”)

ENERGYFIT PRODUCTS COMMERCIAL WARRANTY STATEMENT
What is Covered
EnergyFit warrants to the original purchaser of this product (the “Product”) that the frame of the
Product shall be free from defect in materials and workmanship for a period of ve years from the
date of purchase. All other parts and components of the Product shall be free from defect in material
and workmanship for a period of two years from the date of purchase when the Product is used as
recommended by EnergyFit under normal uses and conditions. During the warranty period EnergyFit will
at no additional charge to you, repair or replace (at EnergyFit option) the frame or any part of the Product
if it becomes defective, malfunctions, or otherwise fails to conform with this Limited Warranty. Labor
coverage is not included.
What is Not Covered
This Limited Warranty applies only for Product sold worldwide under the EnergyFit brand name. This
warranty does not cover normal wear and tear on items such as, but not limited to, transportation
wheels, plastic end caps, scratched parts, broken covers, cosmetic damage, and excludes paint &
nish. Wear items pertain to components that might need to be replaced due to wear and tear resulting
from normal usage. This warranty is void if the Product is improperly stored, assembled, altered and/
or modied in any way, misused, abused, is subject to accident, is improperly maintained, and this
warranty does not cover repair for any noises such as: squeaks, clunks, thumps resulting from poor or
lack of preventive maintenance. This Limited Warranty does not extend to any Product that is damaged
or rendered defective; (a) as a result of accident, misuse, or abuse; (b) use with the Product of any part
not manufactured or sold by EnergyFit; (c) by modication of the Product; (d) by normal wear and tear;
(e) operation using incorrect power supplies; or (f) as a result of service by anyone other than EnergyFit,
or an authorized EnergyFit service provider. This Limited Warranty is void if the Product serial number
has been defaced or removed. Should any Product submitted for warranty service be found ineligible, an
estimate of repair cost will be furnished.
Warranty Service Area
If a Product requires shipment, delivery or transport it is the purchaser’s sole responsibility and to pay
for any fees associated with servicing of a Product. Any evidence of alteration, erasing or forgery of
proof-of-purchase documents voids this Limited Warranty. This Limited Warranty applies only to Product
purchased from EnergyFit or from an authorized EnergyFit reseller.
Voided Warranty
The warranty does not apply to any failure of the product or its components due to alterations or
modications, misuse and abuse, accidental damage, lack of maintenance or improper assembly.
Improper assembly can be avoided if the unit is assembled by an authorized technician. Damage due
to improper assembly is not covered by the warranty. Common assembly errors can include damaged
wire harnesses, stripped screws and nuts, or damaged threads. If the serial number has been removed,
altered or defaced, the warranty for the affected unit is voided.
Disclaimed Warranties
THE PROVISIONS OF THIS WARRANTY ARE IN LIEU OF ANY OTHER WARRANTY, WHETHER
EXPRESS OR IMPLIED, WRITTEN OR ORAL. TO THE MAXIMUM EXTENT ALLOWED BY LAW,
ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED
WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE
AND WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY
EXCLUDED TO THE MAXIMUM EXTENT.
Warranty Registration
PLEASE REGISTER YOUR PRODUCT WITH ENERGYFIT WITHIN (10) DAYS OF PURCHASE online
at www.energy.t/register or via telephone with EnergyFit Customer Service at [phone]. Unless
otherwise prohibited by law, in order to validate the warranty this Product must have been registered
through EnergyFit, and/or a copy of the proof of purchase, transferred warranty letter, and serial number
must be presented at time of service. If these items are not presented at the time of requesting parts or
service, EnergyFit will not cover any warranty.
Warranty Claim Processing
To obtain warranty service, you must contact the original place of purchase. EnergyFit may, at its option,
repair or replace any defective Product frame or parts with new or serviceable used parts that are
equivalent in function to the original parts. All exchanged frames and parts replaced under this warranty
will at the time of service become the property of EnergyFit. EnergyFit reserves the right to change
manufacturers of any parts to cover any existing warranty. Any parts determined to be defective must be
returned to EnergyFit to obtain warranty service. You must prepay any shipping charges, export taxes,
custom duties and taxes, or any other charges associated with transportation of the parts or Product. In
addition, you are responsible for insuring any parts or Product shipped or returned. You assume the risk
of loss during shipment.
Transferring Your Warranty
During any remaining warranty period, the remaining period of warranty can be transferred one time
to another party, as long as the original purchaser previously registered their Product with EnergyFit,
and submits within 30 days after transfer of the Product a letter to EnergyFit at the address below
acknowledging the transaction and specifying the new owners name, address and phone number, along
with the serial number of the transferred Product. The original warranty may only be transferred once.
Please see other products from EnergyFit at www.energy.t.
THANK YOU FOR YOUR BUSINESS!
(01January22)
15405 Red Hill Avenue, Suites A&B, Tustin, California 92780 Ph. 1-866-754-7697
For more information or questions regarding your product, please visit our website at www.energy.t
© EnergyFit 2022
SERIAL NUMBER LOCATION
MAINTENANCE & SERVICE
TASKKDAILY MONTHLY
Wipe down all surfaces with a mild soap solution and dry
thoroughly.
X
Inspect unit for noisy, damaged or loose components. X
Ensure the unit does not rock. If necessary, re-adjust the leveling
feet.
X
Inspect the entire unit for loose hardware, including the beam,
support legs, frame and plastic covers.
X
Inspect the row and ski ropes for wear. X
Clean all dust, lint or debris from all fan openings. X
Move the Ski-Row and clean/vacuum dust, lint or debris found
under the frame.
X
CONDITION POTENTIAL CAUSES SOLUTIONS
Console will not
power on.
a. Batteries installed incorrectly. a. Check battery orientation and
correct.
b. Batteries are dead. b. Replace the four C alkaline
batteries.
Console powers on,
but metrics do not
post.
a. Speed sensor cable is
damaged or disconnected.
a. Check for damage and proper
connections.
b. The speed sensor and magnet
are not correctly aligned.
b. Adjust the speed sensor
positioning.
No resistance in the
Ski Handles
Pulley Link Screw not installed
correctly.
Return Pully assembly to lowest
position and install link screw.
Beam loose in the
upright position.
Beam lock adjustment screws
are too loose.
Adjust Beam Lock Screws to
tighten beam position while beam
is upright.
All Ski-Rows are engineered for years of operation. Regular maintenance and cleaning
will lengthen the life and preserve the appearance of the Ski-Row.
Let noise be your rst indication that a repair or adjustment is required. Please
discontinue use immediately and contact an Authorized Service Technician or EnergyFit
Dealer if an unusual noise, scraping, knocking, grinding or vibration is detected. Often, a
minor issue will become a major repair if ignored and use is continued.
The Ski-Row is manufactured of durable materials; the plastics are molded of strong and chemical-
resistant ABS; the frame is produced of high-tensile steel and protected with an industrial-grade, powder
paint coating process for the highest level of corrosion resistance; the hardware used for the assembly
is corrosion resistant. However, it is important to note that perspiration can be extremely corrosive if
allowed to accumulate on the machine.
ATTENTION: PERSPIRATION IS VERY CORROSIVE AND IF ALLOWED TO REMAIN
ON THE MACHINE, WILL CAUSE DISCOLORATION, FADING, RUST AND
ODORS. UNFORTUNATELY, THESE CONDITIONS ARE NOT COVERED UN-
DER THE WARRANTY POLICY.
After each workout, wipe down the entire unit, including the console with a mild soap solution followed
by a thorough drying with a clean towel. Positioning a small spray bottle and towel near the unit will help
ensure that your equipment looks new for many years. Do not use abrasive or coarse brushes or cloths
as damage to the surfaces may occur. Do not ood any area with cleaning solution or liquid. Do not use
aggressive chemicals or solvents to clean the Ski-Row.
A guideline for service is provided below. If the environment for the Ski-Row is extraordinarily dirty or the
usage is extremely heavy, the monthly inspection/service should be performed more often.
Maintenance Recommendations
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
AND USE GUIDELINES