Enigma TS-00047 User manual

TS-00047
Instruction Manual

240v IP20
Add new GU10 Max
25W Lamp Slidel lens down
2
5
Slide up
Press
Relamp Instructions
Instructions
1
4
3
Lock
(Side view)
2
(Top view)
1(Bottom
3
5
Caution may be hot! Remove lamp
t.01420 473 889
e.[email protected]
www.enigmalighting.com
Product: Pinspot Mini
Light Source: GU10 Max 25W
WARNING [1] The safety of this fixture is guaranteed only
if you comply with these instructions; remember to
conserve in a safe place.
[2] When installing the system, strictly comply with all regulations
on installation in force.
[3] Installation should be carried out by a qualified electrian.
[4] This luminaire is for indoor use only.
[5] The light source of this luminaire is not replaceable;
when the light source reaches its end of life the whole
luminare shall be replaced.
[6] Do not use excessive force when adjusting.
[7] Observe lamp polarity
[8] Clean with dry cloth only.
[9] Lamps may get hot when in use. Allow to cool before
adjusting or relamping
[10] Do not place near flammable objects / do not cover
(Side view)
4
Adjust
6