Enigma TS-00028 User manual

TS-00028
Instruction Manual

240v IP20
Insert lamp
12V max 35WConnect
new lamp
2
5
Unscrew x3
Relamp Instructions
Instructions
1
4
3
Lock
(Side view)
2
(Top view)
1
(Bottom
4
(Bottom
3
Select circuit
1
2
3
3
1
2
3
3
(Side view)
5
Adjust Turn on
6
Screw x3
6
Caution may be hot! Remove lamp
t.01420 473 889
e.[email protected]
www.enigmalighting.com
Product: Track Pin-Spot LED
Light Source: AR111
WARNING [1] The safety of this fixture is guaranteed only
if you comply with these instructions; remember to
conserve in a safe place.
[2] When installing the system, strictly comply with all regulations
on installation in force.
[3] Installation should be carried out by a qualified electrian.
[4] This luminaire is for indoor use only.
[5] The light source of this luminaire is not replaceable;
when the light source reaches its end of life the whole
luminare shall be replaced.
[6] Do not use excessive force when adjusting.
[7] Observe lamp polarity
[8] Clean with dry cloth only.
[9] Lamps may get hot when in use. Allow to cool before
adjusting or relamping
[10] Do not place near flammable objects / do not cover