ENS TAILWIND FlexiPole Plus Instruction Manual

2019 Tailwind Solutions
Revision A
BACKPLATE
RELEASE
TAB
SHOWN WITHOUT
ACCESS COVER
CENTER CABLE
ROUTING
CUSTOMER
REAR CABLE ROUTING
FlexiPole Plus (Quick Release)
Quick Installation Guide

5 min
TOOLS PARTS Note
For screw mount –use stand as a
template. Drill/screwdriver will be
required. Use qualified personnel.
1
1X
2
1) Phillips screwdriver
2) Drill if mounting to
surface with screws
Use qualified personnel
Note
No drill required if using adhesive
pad provided.
1X
1X
Top View
3X Mounting holes
Use appropriate #8
flat head screws for
the surface being
mounted to
3
FlexiPole Plus (Quick Release)
Quick Installation Guide
Drill hole to route
Cable thru counter
40mm diameter max
Cable routing option 1Cable routing option 2
Pivot Tension
Adjustment Dial
Important Note
To fit back cover first engage lower
clips, second engage top clips.
1
2